Brian's '96

D1cker1 · Post by **D1cker1** » Sun Nov 24, 2013 10:17 pm

: ImageUploadedByTapatalk1385356639.097409.jpg (198.66 KiB) Viewed 2050 times

YETI

VintageIronFab · Post by **VintageIronFab** » Thu Jan 09, 2014 1:06 pm

Hey Brian-- do you have any pics of what you did with your exhaust? If its in the 68 pages I tried to see it but might have missed it.

Thx

yikes · Post by **yikes** » Thu Jan 09, 2014 8:18 pm

This is about the only picture I've got...

VintageIronFab · Post by **VintageIronFab** » Thu Jan 09, 2014 9:11 pm

So thats just a 40 series then about 18" with a 90* dumping to the ground? Simple and sweet

Thanks!

yikes · Post by **yikes** » Thu Jan 09, 2014 9:53 pm

Yup. Gives it a nice sound. Not too loud. Minimal droning inside the cab.

VintageIronFab · Post by **VintageIronFab** » Thu Jan 09, 2014 10:11 pm

One more dumb question-- driving with the back window down-- is it carbon monoxide-ville or is it all good?

yikes · Post by **yikes** » Fri Jan 10, 2014 6:21 pm

VintageIronFab wrote:One more dumb question-- driving with the back window down-- is it carbon monoxide-ville or is it all good?

Don't do it.

VintageIronFab · Post by **VintageIronFab** » Tue Jan 14, 2014 9:57 pm

Brian,
Hey The bracket you have that mounts the air cleaner (the version on the fenderwell) -what is the round part that filter mounts to? Also in the air box I thought the air intake temp sensor goes in that box (I think anyway) where/what did you do that with sensor-- leave it in free air or possibly tap the MAF sensor housing??

yikes · Post by **yikes** » Sun Jan 19, 2014 8:16 pm

VintageIronFab wrote:Brian,
Hey The bracket you have that mounts the air cleaner (the version on the fenderwell) -what is the round part that filter mounts to? Also in the air box I thought the air intake temp sensor goes in that box (I think anyway) where/what did you do that with sensor-- leave it in free air or possibly tap the MAF sensor housing??

The round filter adapter was provided with the original K&N FIPK kit I bought in 2000. The inlet air temperature sensor is supposed to be directly in the airstream for optimum performance. I have it located a couple inches away from the filter, so there may be a slight discrepancy in temps, but not much.

yikes · Post by **yikes** » Sun Jan 19, 2014 8:19 pm

Here's my first attempt at GoPro footage of the suspension. Filmed at Pismo. There is no edit to the footage, so skip to 1:30 or so to get past the still shot. There are 3 small jumps in the last 5 minutes.

Nick · Post by **Nick** » Sun Jan 19, 2014 8:44 pm

What's flopping around in front of the body mount?

Nick · Post by **Nick** » Sun Jan 19, 2014 8:48 pm

You got passed by your own shadow at 9:54. What's up, you getting old?

yikes · Post by **yikes** » Sun Jan 19, 2014 8:50 pm

Nick wrote:What's flopping around in front of the body mount?

HID stuff. Bulbs were problematic, so I threw the OE ones back in.

robertcrav · Post by **robertcrav** » Sun Jan 19, 2014 9:57 pm

Sweetness

yikes · Post by **yikes** » Mon Mar 03, 2014 6:11 pm

Broke the large upper steering shaft bearing at KOH and just got around to fixing it. Wasn't too bad. Took a while for the first time though. Also, replaced the airbag with a fancy horn button.

tcm glx · Post by **tcm glx** » Mon Mar 03, 2014 6:12 pm

Your truck is fast even when it's stopped!!!

VintageIronFab · Post by **VintageIronFab** » Mon Mar 03, 2014 6:31 pm

cool wheel!

93Broncobuff · Post by **93Broncobuff** » Mon Mar 03, 2014 6:39 pm

tcm glx wrote:Your truck is fast even when it's stopped!!!

Hahahah i see what you did there! Lol

cypher · Post by **cypher** » Mon Mar 03, 2014 9:17 pm

Can you please give the steering wheel dimensions? Size? Dish?

yikes · Post by **yikes** » Mon Mar 03, 2014 9:27 pm

350mm diameter - 63mm dish. The Momo adapter puts this wheel about 1 1/8" closer to the driver than the factory wheel, which is what I was after for better control. Leg room is an added bonus.

Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96