Brian's '96

Post by **SteveG** » Sat Nov 10, 2012 8:01 pm

Ditto. Just start it and keep adding fluid. The air will work its way out.

yikes · Post by **yikes** » Sun Nov 11, 2012 4:52 pm

It was the pump, unfortunately. Discovered the Saginaw part number for Broncos has been discontinued. Due to time constraints, had to switch back to a factory pump...and I hate it! But it's alive and ready for the mil (I hope), so I'm heading out the door for a Hangar visit to

economig · Post by **economig** » Sun Nov 11, 2012 5:30 pm

Ha ha! Awesome! I hate rushing before dez trips but love the last minute success stories! Cheers with the hangars yeah!

economig · Post by **economig** » Sun Nov 11, 2012 5:31 pm

Oh wait a minute...

Confirming "Hangar 24" hangars? Ha ha otherwise my bad

yikes · Post by **yikes** » Sun Nov 11, 2012 5:43 pm

That's righr! Going for my 2nd chocolate porter right now! Love this place. Drove the Bronco too...no leaks! Whiny bitch though. Haha!

philofab · Post by **philofab** » Sun Nov 11, 2012 6:02 pm

If you already had a sag pump you could have put the adapter, shaft extension, and hose fitting on a standard pump from a Chevy.

yikes · Post by **yikes** » Sun Nov 11, 2012 6:05 pm

Sure. Wait until I'm finished to pass on the info.

economig · Post by **economig** » Sun Nov 11, 2012 8:57 pm

yikes wrote:That's righr! Going for my 2nd chocolate porter right now! Love this place. Drove the Bronco too...no leaks! Whiny bitch though. Haha!

Nice!!! Only bought them at Staters so far ha ha I wanna try the real deal out over there soon! Have fun Brian! Jealous about the mil and that!

AussieRod · Post by **AussieRod** » Sun Nov 11, 2012 10:54 pm

Run a trans cooler in the return line from box to pump. The pump runs much cooler and tends not to whine as much. The seals on the plastic body last for ever, too (so does the PS box).

yikes · Post by **yikes** » Mon Nov 12, 2012 7:11 am

AussieRod wrote:Run a trans cooler in the return line from box to pump. The pump runs much cooler and tends not to whine as much. The seals on the plastic body last for ever, too (so does the PS box).

I run a small finned cooler bolted in front of the radiator similar to this...

AussieRod · Post by **AussieRod** » Mon Nov 12, 2012 1:06 pm

yikes · Post by **yikes** » Sat Nov 17, 2012 9:33 am

May as well get the party started...the short list.

bajascott · Post by **bajascott** » Sat Nov 17, 2012 9:37 am

That's a short list....looks good to me! Good luck

yikes · Post by **yikes** » Sat Nov 17, 2012 9:57 am

Just added "code scanner" and "waterproof connectors". Bronco doesn't like puddles too much. Haha! Tony said mean things to me after it quit in the middle of the course.

bajascott · Post by **bajascott** » Sat Nov 17, 2012 10:14 am

One reason I got rid of alll that crap.one minute.....braaaap next minute oh shit.

BajaBronco13 · Post by **BajaBronco13** » Sat Nov 17, 2012 10:23 am

yikes wrote:Just added "code scanner" and "waterproof connectors". Bronco doesn't like puddles too much. Haha! Tony said mean things to me after it quit in the middle of the course.

It was like following the Hunt for Red October! Brian needs a snorkel on the Yeti, ha ha.

tcm glx · Post by **tcm glx** » Sat Nov 17, 2012 10:28 am

Brian wasnt allowed to play in the rain, or puddles for that matter as a kid.... that was obvious this weekend..........

"slower is faster, slower is faster!!"

******picture added

tcm glx · Post by **tcm glx** » Sat Dec 15, 2012 9:52 pm

Stop picking your nose, and give us some updates will you.

flyinbronco · Post by **flyinbronco** » Wed Jan 23, 2013 11:51 am

Hey Brian what brand of fuel door did you use on your bed side? I have to go back to the stock filler for smog reasons.

Post by **SteveG** » Wed Jan 23, 2013 12:07 pm

Rick, you should be able to use the stock one for smog. Even if It's not bolted in. As long as it's plumbed properly....

Brian's '96

Re: Brian's '96

Re: Brian's '96

Brian's '96

Brian's '96

Re: Brian's '96

Brian's '96

Re: Brian's '96

Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96

Re: Brian's '96