Jose's 94

crisis88 · Post by **crisis88** » Mon May 27, 2013 9:57 am

I haven't ok'd it with the wife yet. So I'm not so sure.

yikes · Post by **yikes** » Mon May 27, 2013 10:25 am

Tell her you have to pick up your hat. It''s in my Bronco now. If you don't pick it up,, then I have to donate it to Baja.

crisis88 · Post by **crisis88** » Mon May 27, 2013 11:02 am

Hahaha. Sorry guys. I'm not going to make it. Just got done making brunch

: ImageUploadedByTapatalk1369677554.348499.jpg (170.73 KiB) Viewed 992 times

And I don't think I'm going to be able to pull my self away from this view all day

: ImageUploadedByTapatalk1369677626.431865.jpg (186.93 KiB) Viewed 992 times

Even though I have a bronco that needs cleaned bad.

Go ahead and donate that hat Brian. Make sure it goes to one of the kids though.

You guys are always welcome here.

crisis88 · Post by **crisis88** » Wed Jun 19, 2013 4:18 pm

Here's a little update. I got some motivation to pressure wash my carpets. Thanks to Kel.

it came out ok. It's definitely a lot cleaner than it was.

Of course this snowballed like everything else. Nothing is ever simple. Haha

Since I stripped the interior I was going to dynomat it but didn't feel like paying 200+ dollars and driving around trying to find it.
So to the depot I went. And picked up a couple rolls of peel and seal. After reading mixed responses concerning smell etc. I decided to try it myself.

Ok here is where I'm at.

: ImageUploadedByTapatalk1371683676.406773.jpg (160.9 KiB) Viewed 923 times

: ImageUploadedByTapatalk1371683690.888937.jpg (158.01 KiB) Viewed 923 times

: ImageUploadedByTapatalk1371683706.922376.jpg (165.11 KiB) Viewed 923 times

That's 2 rolls. I'm going to pick up probably 4 or 6 more rolls to finish the whole bronco.

So this started out as a simple no cost carpet cleaning to.. This..

Oh on top of it all my pressure washer took a crap. Haha.

Wish me luck tomorrow.

hobbyturnedobsession · Wed Jun 19, 2013 4:24 pm

Good luck lol

tcm glx · Post by **tcm glx** » Wed Jun 19, 2013 4:25 pm

Get er done!

robertcrav · Post by **robertcrav** » Wed Jun 19, 2013 8:37 pm

Lol, keep it rolling, looks good

Kel Fab Creations · Post by **Kel Fab Creations** » Wed Jun 19, 2013 10:11 pm

You took the padding off the back of the carpet before you washed it right? I ordered new padding online. 50 bucks to redo it all with 40oz jute. Did you spray it till it was no longer coming out white soapy looking or brown? I bet you could get rid off those darker spots with a little more spraying.

Notice any smell with the P&S? I had my mind set on the rattle trap stuff for 200 delivered but I may end up doing P&S now that you're doing it. Did you buy the roller too?

crisis88 · Post by **crisis88** » Wed Jun 19, 2013 10:46 pm

Kel Fab Creations wrote:You took the padding off the back of the carpet before you washed it right? I ordered new padding online. 50 bucks to redo it all with 40oz jute. Did you spray it till it was no longer coming out white soapy looking or brown? I bet you could get rid off those darker spots with a little more spraying.

Notice any smell with the P&S? I had my mind set on the rattle trap stuff for 200 delivered but I may end up doing P&S now that you're doing it. Did you buy the roller too?

I reused my padding. It came apart all in one piece. And it had a thick piece of cardboard in between the padding and the carpet. It didn't smell or anything so I just glued it back together.

About the P&S, the smell is very faint to begin with. After I stuck it there's really no smell. As of right now It seems ok, but all the doors are still open. And it's parked in the garage. I should be done with it tomorrow, so ill park it outside for a few hrs and see if it smells.

I'm going to do the wheel wells, and up the sides. Then the front all the way up to the firewall.

cs_drums · Post by **cs_drums** » Thu Jun 20, 2013 8:27 am

I have read all the mixed reviews myself. After talking with several people that have actually done it. THe concencus is smellisnt an issue. I took my heat gun and got a peice to the point the tar was completely melted and its started to smell a little but that was with out it sealed to anything. I think I will duct tapt the seams just for the hell of it though.

crisis88 · Post by **crisis88** » Thu Jun 20, 2013 8:31 am

The duct tape is a good idea. I just went out and took a sniff. No smell at all. So I'm going to finish it up.

Now I hope it provides some sound deadening!! Haha.

crisis88 · Post by **crisis88** » Sat Jun 22, 2013 6:02 pm

Ok all done!! Here are my findings.

To start, I did the cab front to back. Up the sides and up to the firewall.

I used a total of 6 rolls. ( 6" x 25' ) rolls.
Home Depot peel and seal. Cheap stuff $16.00 each.

Up to this point no stinky smell!! At all.
The wife thinks it is a lot quieter. I'm not to sure. It IS quieter, but not what I expected. I guess I was waiting for Mercedes type comfort. Ya jokes on me... Haha I wish I could have measured how loud it was before and after. Oh well it's quieter and I can hear my radio and have a regular conversation.

While the interior was apart I cleaned up the carpets and interior pieces. I could have taken 3 or 4 more days cleaning carpets but this was good enough.
The interior looks much better.

I have to finish putting my parts and spare tire back in. So here's a few pis of the finished product.

: ImageUploadedByTapatalk1371949320.472556.jpg (129.63 KiB) Viewed 784 times

: ImageUploadedByTapatalk1371949347.851343.jpg (127.9 KiB) Viewed 784 times

: ImageUploadedByTapatalk1371949369.784504.jpg (153.36 KiB) Viewed 784 times

crisis88 · Post by **crisis88** » Sat Jun 22, 2013 6:04 pm

: ImageUploadedByTapatalk1371949395.284634.jpg (132.66 KiB) Viewed 782 times

: ImageUploadedByTapatalk1371949416.767956.jpg (135.84 KiB) Viewed 782 times

: ImageUploadedByTapatalk1371949443.067772.jpg (129.39 KiB) Viewed 782 times

: ImageUploadedByTapatalk1371949456.284397.jpg (132.99 KiB) Viewed 782 times

ocejo · Post by **ocejo** » Sat Jun 22, 2013 7:09 pm

Nice Bronco Jose.

Question on the seats, Which seats are you running and how comfortable are they for a DD

crisis88 · Post by **crisis88** » Sat Jun 22, 2013 7:22 pm

All 4 seats are old. I had a friend re upholster them. 2 of them are old beards and 2 of them are old mastercrafts. My seat is a little wider than the other 3, so it's a little more comfortable. I do drive this thing daily and I have no complaints. We have driven 4 or 5 hours and I had no real complaints from the wife or kids.

Hope that helps.

Rmc · Post by **Rmc** » Sat Jun 22, 2013 9:38 pm

Is that a second battery or the one from the front relocated?

crisis88 · Post by **crisis88** » Sat Jun 22, 2013 10:30 pm

It's the one front he front relocated.

crisis88 · Post by **crisis88** » Sat Jun 22, 2013 10:31 pm

Damn no edit!!! It's the one from the front.

Rmc · Post by **Rmc** » Sat Jun 22, 2013 10:42 pm

What's the square thing above it? A terminal block of some kind to divide up for more positive outputs? Hard to make it out in the pic.

crisis88 · Post by **crisis88** » Sat Jun 22, 2013 11:07 pm

Yes. It's a fuse block. I use it to run all my aux. stuff. Currently it runs my light bar and dust lights. But I have room for additional fused items.

Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94