Little bits of everything - alcoas, 35" BFGs, race c6, Fox

[ChaseTruck754]

Since the supercab sold without any of this I've got some selling to do...


Autofab 3" flare bedsides for 73-79 trucks (used). These are in good shape but need to be cleaned as they are dusty from sitting in the shop - $550. New price on these is $800!




Autofab 4" lift for front (5 lug spindles) - $750



351w bare block - $50


Giant/Deaver spring under 64" leafs with ruff stuff leaf mounts, BMS shackles & heavy duty chevy hangers with weld washers. Have template of mounting position for F series.
Leafs on truck for mock up only & never run - $1,200






5 Alcoa wheels - 3 wheels are 15x7 & 2 are 15x8. These are the not so common, 8 hole design. - $500
1 of the 15x7's has some slight curb/rock rash - it's small - see pics.
I'd prefer to sell as a set, but if they don't sell after a month or so I'll separate.






6 Alcoas wheels - 5 wheels are 15" & 1 is 16" wheel. These are the 5 spoke we all know & love! I've held off selling these for a long time, with a lot of people asking but my storage is going by by so they can leave (though not without a little sticker shock ) - $900
3 have the 35" BFGs on them currently. So will do the wheels with tires for $1500







4 - 35x12.5r15 BFG ATs at 85% or so tread - $700.
3 are mounted on the 5 spoke alcoas at this time so will do the wheels with tires for $1500




Culhane built, race c6 (protruck trans - FRESH!) with gearvendor & brand new art carr shifter (set up correctly on trans by Culhane) - $2,250
Will possibly sell without GV if you pay culhane to take it off. I have the 2wd short shaft, fixed yoke or the 4wd tailshaft and housing to do so.



Radius arm mounts for heimed radius arms. Used & were welded on & cut off cleanly - $35





14" stroke, 2.0 Fox shocks - $300

[ChaseTruck754]

Realized I forgot to mention all the alcoas are 5x5.5 lug pattern

[Becks_Bronco]

Damn, would have loved to have those 5 spoke alcoa's. but i'm 5x4.5

[Becks_Bronco]

Steve, do you know what the model is on those Alcoa's?

[SteveG]

If the trans sells separate from the GV unit & it'll work ins C4, I might be interested.

[ChaseTruck754]

Sorry Will but I don't.

And Steve - did you mean if "it'll work instead of a c4"??? Not quite sure what you meant.

c6 is a "small block" bellhousing = windsor family & cleveland.

It's the "heavy duty" bellhousing with the ribs on it.

It's got a manual valve body in it.

[AussieRod]

I think Steve meant if the GV unit can fit the C4, with appropriate adapters.

[Rmc]

If u take off the gear vendors how is the output shaft coupled? Is it a super long output shaft? Wondering cause I need a fixed tail shaft for my unfinished 1400 truck.

[Rmc]

Clarification: fixed tail shaft to put a 1350 bolt on yoke.

[Rmc]

I was under the impression the trans would have to be tore completely down to swap between shaft types. Please correct me if I heard wrong, if its not that big of a deal to change over ( with the gv) I also may be interested.

[SteveG]

Sorry, Steve... I was responding on my phone & didn't proofread. I meant if it will work on a C4, I'm interested. The Falcon would looove to have Overdrive.

[ChaseTruck754]

Everything is now currently on hold as the damned buyer on the supercab just flaked. After I'd parted with the fuel cell and motor for the thing - lovely...

Hopefully a better home for it will come of it though as something is in the works.


As for the tailshaft, etc. on the thing - yes, to change from the long to short tail shaft on the things I believe the trans has to come ALL the way apart.

It cost about $200 to have culhane do this & put the GV on when I switched to it from the fixed tailshaft (which is MUCH shorter then the long, slip shaft style)

[ChaseTruck754]

Back up top.

Supercab sold again and the guy who bought the it is having a hard time pulling the cash together for the autofab kit & bedsides he wanted with it. He said to feel free to list back up again & if they sell before he pulls the cash together so be it.

That being said all is up for grabs again.

[Polarcub]

Steve is that 351 block a roller block? If it is I am interested.

[ChaseTruck754]

Unfortunately no. You can drill & tap the older blocks like this for the dog though.

[ChaseTruck754]

Fox shocks sold

[ChaseTruck754]

Autofab kit sold

[93Broncobuff]

just wondering, what all is left?

[ChaseTruck754]

Bedsides, spring under leafs (sale pending), c6, both sets alcoas & radius arm brackets.

On a side note - someone was working on friday night! Saw the bronco and you staring at my black tacoma with full glass and a bed full of crap as I sat at a light on Beach & I think Indianapolis. I tried to wave as you turned the corner & looked but wasn't sure if you saw me.

[93Broncobuff]

Hahahah ya that was me, sorry i didnt see ya waving lol i was blastin some metallica n was in the zone lol