Jose's 94

crazyjim · Post by **crazyjim** » Tue Jan 01, 2013 9:28 pm

I was on a dirtbike, or in a rhino depending on when you saw me. I saw you, a white one with a longer red sticker along the bottom of the rear windows, couldn't read it, and a two tone silver one that I mentioned, caged, linked, etc.

crisis88 · Post by **crisis88** » Mon Jan 14, 2013 7:12 pm

I finally upgraded my headlights, thanks to Tony. I have to say it was definitely a great step up.

I have never been a fan of cheap aftermarket projector headlights. And I hate HID's in regular housings. Most of these two options blind the crap out of oncoming traffic.

These lights are top notch.

I tried to take a few pics, they aren't the best but here they are.

: ImageUploadedByTapatalk1358215892.968529.jpg (152.58 KiB) Viewed 1332 times

: ImageUploadedByTapatalk1358215930.409202.jpg (132.62 KiB) Viewed 1332 times

: ImageUploadedByTapatalk1358215951.975504.jpg (96.59 KiB) Viewed 1332 times

tcm glx · Post by **tcm glx** » Mon Jan 14, 2013 7:18 pm

Glad you likey!!! Looks great with the stock amber turn signal.

robertcrav · Post by **robertcrav** » Mon Jan 14, 2013 9:23 pm

Lookin good man!!

hobbyturnedobsession · Mon Jan 14, 2013 10:52 pm

Nice Jose!

D1cker1 · Post by **D1cker1** » Tue Jan 15, 2013 8:11 am

Oooh look át those lights

economig · Post by **economig** » Tue Jan 15, 2013 1:45 pm

Dude... I'm loving the way your bronco turned out with the stance! Looks so good!

cs_drums · Post by **cs_drums** » Tue Jan 15, 2013 1:47 pm

What front glass is that?

Kel Fab Creations · Post by **Kel Fab Creations** » Tue Jan 15, 2013 7:41 pm

Looks real good Jose! I needa get some of those headlights.

tcm glx · Post by **tcm glx** » Tue Jan 15, 2013 7:44 pm

Kel Fab Creations wrote:Looks real good Jose! I needa get some of those headlights.

Yes you do!!!

crisis88 · Post by **crisis88** » Tue Jan 15, 2013 9:06 pm

Thanks guys. It's been a slow time getting here. But it's getting closer and closer to me being satisfied. I don't say done or happy cause that will never happen. Ha.

cs_drums wrote:What front glass is that?

They are fiberworks fronts and glassworks rear.

Kel. This upgrade is a must. Old light tech compared to is is like "night and day" haha. (I crack myself up.)

Anyway. Thanks again guys.

Jose

crisis88 · Post by **crisis88** » Wed Jan 23, 2013 10:01 pm

I've lost that loving feeling!!!!!!!!

Or I'm beginning to. I need to do something to spike my interest in the bronco again. I think having to drive it daily is numbing my driving experience.

So I'm thinking I want to do something with my bumpers or front bumper. And I'm going to do my exhaust.

First question. Anyone near by have a bender I can bend a piece of 1-3/4"?

Second- I was laying under the bronco looking at the oil collecting on the oil pan. ( I have to do the pan gasket ). And I figured out I have to probably remove the y-pipe to get the pan out. Which got me thinking about re-doing my exhaust.

Which leads me to my next question. I've been reading up on bassani and magnaflow and summit y-pipes. Does anyone have experience with any of these? I really don't want to get rid of the stock y-pipe but it looks like crap. I'm going to start tacking up some of my exhaust pieces. I'm going to use 2.5" stainless and 3" stainless out the side ala Randy.

I also don't know what muffler to use. I'm looking for a stainless steel muffler. But I think I want something a little quieter than your average 40 series flowmaster.

So any ideas. I have to start loving my bronco again or I'm afraid of what the repercussions will be.

Thanks,
Jose

Seabass · Post by **Seabass** » Wed Jan 23, 2013 10:22 pm

I have the basani y-pipe and I dig it.

Kel Fab Creations · Post by **Kel Fab Creations** » Thu Jan 24, 2013 1:58 am

If you can wait a couple weeks I can make a couple bends for ya. I know we're not too close but if need be hit me up...

greaslife · Post by **greaslife** » Thu Jan 24, 2013 5:49 am

U can use my bender any time we can meet up for coffee and take it home if I can get it back couple weeks later that would be cool

yikes · Post by **yikes** » Thu Jan 24, 2013 12:23 pm

You know I'm close by Jose. Just let me know if you want to bend something and bring it on over. I'm holding your hat hostage too. Haha!

crisis88 · Post by **crisis88** » Thu Jan 24, 2013 8:58 pm

Thanks guys for all the offers. I need to give the bronco a little makeover.

@ Josh. Thanks, I might have to take you up on that. It would be nice to have a bender here for a couple weeks. I could get some stuff done I've been putting off.

@Seabass. Did you get the y-pipe with the cat attached? I was looking at that one. But I was wondering what the lenght was.

I still don't know what muffler to run. So many options. I want something that's not crazy loud but still sounds good. I'm going to have trouble finding this in a small package.

@ Yikes. I'm going to take you up on that offer ill be in touch soon. And as far as my hat is concerned, I'm initiating a rescue mission. I will be coming for that hat.....
Stay vigilant my friend.

greaslife · Post by **greaslife** » Thu Jan 24, 2013 9:28 pm

Look at magna flow that's what I have on the 55 they are not too loud and sound good.

Post by **SteveG** » Fri Jan 25, 2013 10:41 pm

crisis88 wrote:I've lost that loving feeling!!!!!!!!

Damn it! I feel partially responsible. Had we not gone so big on Saturday, we would have been able to play on Sunday.

Sorry, Jose!

crisis88 · Post by **crisis88** » Wed Jan 30, 2013 7:04 pm

I finally went to storage and picked up the stainless for my exhaust. 2.5" and 3" for the exit. Need to get a 90 degree and make a 45 degree.

: ImageUploadedByTapatalk1359597613.480544.jpg (142.9 KiB) Viewed 966 times

Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94

Re: Jose's 94