Tonys 93 bronco

tcm glx · Post by **tcm glx** » Fri Apr 13, 2012 10:56 am

Thanks Jeremy...excited to see your beast once it is done.

Scott, I was pretty jazzed as well. Been driving Vics for the last two days and it feels super tight!

vred · Post by **vred** » Tue Apr 17, 2012 8:56 pm

By the way, the way to differentiate interiors between Susie and Jelly is the shade of grey. Tony's is a darker grey versus mine.

All I can say, is JL kicked butt on the cage and my brother did an awesome job in pre and post fabrication.

Becks_Bronco · Post by **Becks_Bronco** » Tue Apr 17, 2012 9:41 pm

When's susie coming back from the shop?

tcm glx · Post by **tcm glx** » Tue Apr 17, 2012 9:44 pm

Soooooon.... I'd expect by end of the month.

economig · Post by **economig** » Wed Apr 18, 2012 2:15 am

It's funny cause no matter how similar she might come out to Vic's, i keep tuning in for pic updates!

tcm glx · Post by **tcm glx** » Wed Apr 18, 2012 3:00 pm

Ok, minor updates. Windshield bar is in, and c pillar crossmember is in. V bars were being cut and notched

Vics rig in the background

BajaF250 · Post by **BajaF250** » Wed Apr 18, 2012 5:56 pm

What a total crack up T... you had to throw that in there, huh! Just in case we were suspect on the photos!

tcm glx wrote:Vics rig in the background

But darn, that is looking really, really nice T! Is it on sked?

tcm glx · Post by **tcm glx** » Wed Apr 18, 2012 6:04 pm

Yes sir....on schedule!

BajaF250 · Post by **BajaF250** » Wed Apr 18, 2012 7:51 pm

It looks like they are really moving along...

robertcrav · Post by **robertcrav** » Thu Apr 19, 2012 10:44 pm

I'm uber jealous of yours and your brothers trucks...question tho with the cages...is there a reason you didn't have tabs mounted to move the rear seat belt from the top to the cage?

Just curious.... and thanks for Lightning up the trail for cage work

<-- see what I did there

tcm glx · Post by **tcm glx** » Fri Apr 20, 2012 6:31 am

robertcrav wrote:I'm uber jealous of yours and your brothers trucks...question tho with the cages...is there a reason you didn't have tabs mounted to move the rear seat belt from the top to the cage?

Just curious.... and thanks for Lightning up the trail for cage work <-- see what I did there

Thanks! Didnt move the seat belt mounts primarily because I didn't like the look. There is plenty of room to bolt it back in and the roof never comes off, so went with the stock location.

BajaF250 · Post by **BajaF250** » Fri Apr 20, 2012 7:08 am

robertcrav wrote:...and thanks for Lightning up the trail for cage work <-- see what I did there

You crack yourself up!

robertcrav · Post by **robertcrav** » Fri Apr 20, 2012 1:30 pm

tcm glx wrote: Thanks! Didnt move the seat belt mounts primarily because I didn't like the look. There is plenty of room to bolt it back in and the roof never comes off, so went with the stock location.

gotcha...I'm a converted Jeeper so I want to take the top off, but with my 4yr old in the back need protection and restraints

robertcrav · Post by **robertcrav** » Fri Apr 20, 2012 1:31 pm

BajaF250 wrote:
robertcrav wrote:...and thanks for Lightning up the trail for cage work <-- see what I did there
You crack yourself up!

I'm easily amused....

tcm glx · Post by **tcm glx** » Fri Apr 20, 2012 1:35 pm

robertcrav wrote:
tcm glx wrote: Thanks! Didnt move the seat belt mounts primarily because I didn't like the look. There is plenty of room to bolt it back in and the roof never comes off, so went with the stock location.
gotcha...I'm a converted Jeeper so I want to take the top off, but with my 4yr old in the back need protection and restraints

For sure, he said it was an easy option to swap to at any point if I decide to yank the top off......

philofab · Post by **philofab** » Fri Apr 20, 2012 2:28 pm

Tony can't take the top off, dirt would get in!

I take my top off so a few pounds of dirt will blow out....

tcm glx · Post by **tcm glx** » Fri Apr 20, 2012 2:32 pm

philofab wrote:Tony can't take the top off, dirt would get in!

I take my top off so a few pounds of dirt will blow out....

SSSSShhhhhhhhhhhhhhhhhhhhhhhhh, stop letting out my secrets!!

hobbyturnedobsession · Fri Apr 20, 2012 2:50 pm

Hahah Philo likes taking his top off

bajascott · Post by **bajascott** » Fri Apr 20, 2012 2:52 pm

he does live along the river...its pretty common to go topless

economig · Post by **economig** » Fri Apr 20, 2012 6:02 pm

I'm sure you guys have seen them way back on FSB and Pirate but i've been seeing a lot of cool new "Top holders??" ha ha can't think of the name right now... But my buddy Josh made a budget version from one he saw on FSB or something years back and it's pretty awesome/cheap/simple. Don't wanna jack Tony's awesome thread so maybe i'll do a build thread when i do mine or see if he can email me all of his pics. See what i can do. Maybe we can do a thread where everyone can post up different ideas?

We need a GoFast version just for this site... with mini KING struts, pulleys, limit straps and heims jk

saves sooo much garage space in the summer though. My kids love the Bronc in convertible mode!

Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Re: Tonys 93 bronco

Tonys 93 bronco