scott's 88 build

bajascott · Post by **bajascott** » Wed Jul 27, 2011 2:11 pm

the guy who i got it from seems to a really nice guy, he races a class8 truck too.
i have been talking to a guy back east about this type of computer and from what he said, it'll work perfect for what i want use it for.he is going to be helping me get it installed over the phone and how to calibrate it and stuff
should be a snap,and will be fun to use. its hard to read the gps with all the crap on the screen and it will make my passenger alot more comfortable writing course notes knowing the exact milage down to the tenths. my goal is to have course book that will be easily read and accurate for racers to use.

ChaseTruck754 · Post by **ChaseTruck754** » Wed Jul 27, 2011 2:21 pm

Yeah the seller was pretty cool. He was working on the class 8 the night I was there.

The Rally logger will be perfect for what you want. Now get it in there!

DirtFiend602 · Post by **DirtFiend602** » Fri Aug 05, 2011 2:24 pm

Love your bronco man, and i can't wait to get the beams on the truck you built sir.

bajascott · Post by **bajascott** » Mon Aug 08, 2011 10:09 am

thanks! it'll be cool to see another set of the overkilled truss' runnin around.
on a side note, give me a call if you get a chance 541-420-0121 there is something i need to tell you about that perticular set of beams.( assuming you got them from Kermit)

DirtFiend602 · Post by **DirtFiend602** » Mon Aug 08, 2011 1:07 pm

Will do,and yes I got them from Kermit, I have a couple questions for you anyway. When is a convenient time for you?

bajascott · Post by **bajascott** » Wed Sep 07, 2011 3:27 pm

after getting off my ass and doing something i FINALLY got my rear mounts for my light box done..and it has my new blingbling logos(thanks to trophy girl for her mad cad skills)
i will make a deal on 4 un welded boxes, i am clearing out my garage and will make a great deal to someone that wants them to weld together!

only1mikey · Post by **only1mikey** » Fri Sep 09, 2011 12:24 pm

Looking good Scott!

And, Yes I'll take that Kuster part.

email incoming.

Mike

bajascott · Post by **bajascott** » Fri Sep 09, 2011 2:31 pm

thanks mike. hey give me a call if you want.i have some other stuff too you might be interested in....
clearing out and moving on

bajascott · Post by **bajascott** » Sun Oct 02, 2011 11:13 am

just added 5 more degrees of cool....

it is all one color and i did some work to my dash as well....interior is coming around since painting dash and upholstering the dash top
it actually feels more comfortable inside,soft and more relaxing with out the blast of raw aluminum and sharpie drawings all over the place....
i have a couple panels i need to finish on the console and then the dash will be 100% done.then its on to head liner and sound deadening the rest.....i might as well keep on tinkering with it while its for sale,that way when someone actually does call i can tell them well......its not for sale !!

hobbyturnedobsession · Sun Oct 02, 2011 12:03 pm

It looks really nice Scott!

cwrisley · Post by **cwrisley** » Wed Oct 12, 2011 12:59 pm

Looks cool man, I really like the center console.

bajascott · Post by **bajascott** » Wed Oct 12, 2011 1:27 pm

thanks there is now a panel with an inside/outside temp gage in the console above the cup hold on the passenger side..
and i am installing poormans sound deadening on the headliner and cargo deck area with bubble wrap it actually works pretty well.... haha it was free!! even better

ChaseTruck754 · Post by **ChaseTruck754** » Wed Oct 12, 2011 1:51 pm

Never heard of the bubble wrap thing - that sounds cool - haha

bajascott · Post by **bajascott** » Wed Oct 12, 2011 1:56 pm

nothing like dynamat but for a BDMF like me...it seems to work ok,just doing the bed floor and headliner i noticed a good change.

ChaseTruck754 · Post by **ChaseTruck754** » Wed Oct 12, 2011 2:05 pm

I wonder if the heat on the roof will ever get hot enough to pop the bubbles? If so it will probably scare the crap out of you as one goes off...

bajascott · Post by **bajascott** » Wed Oct 12, 2011 2:25 pm

haha i wont do that, i used the same kind of stuff when i was doing residential hvac years ago...

bajascott · Post by **bajascott** » Thu Feb 09, 2012 12:16 pm

It's been a while since I have update this,I haven't done a lot work other than maintenance. But I am collecting parts. It is geting a facelift in the near future ,as well as some suspension upgrades.I am having a good.friend build my rear set up and should be ready to install late march.this will be it.when it is done it'll be done for good
The list:
New ,fiberglass all the way around
Updated beams with Uniballs
9" rear housing tabbed and trussed
Rear cage work to support the new 4link.......

greaslife · Post by **greaslife** » Tue Feb 14, 2012 8:55 pm

all i can say . SWEET this is a sick truck. like the front glass if i loose the brick i will be going too this.

bajascott · Post by **bajascott** » Fri Mar 16, 2012 7:48 pm

getting a facelift

bajascott · Post by **bajascott** » Fri Mar 30, 2012 6:58 pm

messing around with my new face im still waiting on the grill.but hopefully soon i will have it installed and then off to paint FINALLY getting a real paintjob.im so sick of sickflatblack

scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build

Re: scott's 88 build