Early Broncos

User avatar
ESHALLBETTER
Posts: 1588
Joined: Fri Dec 11, 2009 8:49 am
Bronco Info: 85 class 3, 70's somthing trail bronco.
Location: Minneapolis, MN

Early Broncos

Post by ESHALLBETTER »

Hey Guys,

I know some of you on here have early broncos too. I am beginning to get more and more into mine and am wondering if anyone can recommend a good early bronco website. I am on Pirate but I am looking for more of a gofastbroncos feel but dedicated to the shoe box broncos.

Thanks!
User avatar
Phoenix0783
Posts: 658
Joined: Thu Dec 10, 2009 12:50 pm
Bronco Info: No more Bronco :(
Location: Bend, OR
Contact:

Re: Early Broncos

Post by Phoenix0783 »

There's classicbroncos.com. Also checkout bcbroncos.com and broncobob.com. the last two have good suspension and bumpers and whatnot. Bob actually makes the radius arms for and Tom's Bronco parts and I think Wild Horses.
My car is a hybrid; it burns gas and rubber.
CBDuner
Posts: 148
Joined: Sun Oct 24, 2010 8:45 pm
Bronco Info: Wishing I had one!
Location: Coos Bay, OR
Contact:

Re: Early Broncos

Post by CBDuner »

My dad has a full Cage suspension setup up front and rear with their dual shock mounts and progressive springs. Does pretty good at speed through the dunes. Just handles great on and offroad. I think West Coast Broncos cater more to GoFast, Baja type Early Broncos as far as suspension parts.

Forum is pretty much classicbroncos.com
Broncodawg
Posts: 711
Joined: Fri Dec 11, 2009 10:14 pm
Bronco Info: Ole Yeller- 89 Bronco prerunner, 77 Bronco rock rig, 79 F100 prerunner barn find
Location: Bishop, CA

Re: Early Broncos

Post by Broncodawg »

what year EB? Have a 77 trail rig, slowly converting to faster suspension for some prerunning in baja.
X2 on classicbroncos.com
Ole Yeller-89 Bronco Prerunner/77 Bronco rock rig/79 F100 prerunner yard art
User avatar
PBR
Founder
Posts: 996
Joined: Mon Dec 07, 2009 11:21 pm

Re: Early Broncos

Post by PBR »

x3 on classicbroncos.com

what do you guys think about an ep go fast section on here? they are broncos and more and more are going fast! i know we have some really knowledgeable eb guys on here with greg, todd z, paul wilson, just to name a few. thoughts?
Ollie Penchansky
Penchansky Brothers Racing.
BajaBronco13
Bronco Broker
Posts: 2434
Joined: Tue Dec 08, 2009 11:00 am
Bronco Info: Bronco AKA The Silver Bullet
Location: Orange County, California

Re: Early Broncos

Post by BajaBronco13 »

PBR wrote:x3 on classicbroncos.com

what do you guys think about an ep go fast section on here? they are broncos and more and more are going fast! i know we have some really knowledgeable eb guys on here with greg, todd z, paul wilson, just to name a few. thoughts?
My vote is yes. I love early Broncos.

Chris
CBDuner
Posts: 148
Joined: Sun Oct 24, 2010 8:45 pm
Bronco Info: Wishing I had one!
Location: Coos Bay, OR
Contact:

Re: Early Broncos

Post by CBDuner »

I'd love to see an EB section!
User avatar
SteveG
Admin
Posts: 6177
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
Location: Arroyo Grande, CA

Re: Early Broncos

Post by SteveG »

The only reason GFB is mostly comprised of TTB trucks is because they're readily available and they're cheap. If Early Broncos were more plentiful, they would be giving the TTB threads a run for their money! Early Broncos started it all and we would love for GFB to become the go-to site for EB go-fast tech. GFB will never replace some of the larger Bronco sites for general tech and info, but that's not what we're about. There are plenty of sites that can tell you how to change your window regulator. GFB wants to tell you how to eat whoops! And, yeah, we'll help you with the regulator, too.

Campaign speech over!

Ollie, What are you thinking? An EB tech section? Rides?
Sho nuff,
SteveG
User avatar
johncharlesb
Posts: 510
Joined: Fri Mar 12, 2010 7:59 pm
Bronco Info: 1962 f100, 1995 Bronco

Re: Early Broncos

Post by johncharlesb »

This sounds like a fine idea. Since we are here, what about "Disco Broncos"? Although short lived, they are excellent platforms that directly led to the TTB trucks. There seems be a few jive booty keep on truckin' Bay City Rollers around here, maybe we give them a section too?
User avatar
ESHALLBETTER
Posts: 1588
Joined: Fri Dec 11, 2009 8:49 am
Bronco Info: 85 class 3, 70's somthing trail bronco.
Location: Minneapolis, MN

Re: Early Broncos

Post by ESHALLBETTER »

I would have more project pictures!
User avatar
PaulW
Posts: 1599
Joined: Wed Dec 09, 2009 8:56 am
Bronco Info: Modified and Linked 1972 Bronco

Re: Early Broncos

Post by PaulW »

My '72
Not a go fast rig thus no posts, because I am a long WB guy.
My EB is designed as a trail rock rig, and its still a garage queen. Nice suspension by Glen with Lots of travel. 5.0HO/AOD/D20. Built F/R 4.88 axles/ARBs/Fox CO (F/R)/35" BFG Krawlers, etc.
I will make some pics when we get back from easter Moab.
PaulW
Grillmaster
Posts: 11
Joined: Mon Jan 03, 2011 9:43 am
Bronco Info: '68 Bronco - 3.5" SL, 351C 4V, 4 speed toploader

Re: Early Broncos

Post by Grillmaster »

x4 classicbroncos.com

SoCal Broncos Yahoo Group http://autos.groups.yahoo.com/group/soc ... =141245527

I would like to see a forum here on going fast, desert racing etc.

So Cal Broncos got 150 EBs up at the Big Bear Bronco Bash last June. Here is a pic from Tierra Del Sol earlier this month.

Lots of them out there and they can be cheep. I paid 5k for mine and have about 3 more in it.

1968 351C - 4V, 4 Speed Top Loader, 3.5" SL, Bilstein 7100 shocks, F250 Shock Mounts, 4.11 ford 9"/Dana44, 35"KM2s, and a custom tire/fuel/jack rack I just made for the back.

Bought the wheels off of Convoy. Thanks again!
Attachments
new wheels.jpg
new wheels.jpg (173.35 KiB) Viewed 1684 times
TDS5.jpg
TDS5.jpg (252.47 KiB) Viewed 1686 times
BajaBronco13
Bronco Broker
Posts: 2434
Joined: Tue Dec 08, 2009 11:00 am
Bronco Info: Bronco AKA The Silver Bullet
Location: Orange County, California

Re: Early Broncos

Post by BajaBronco13 »

Grillmaster,

Did you put in those fuel doors as they were only available from the factory in 1977 from what I understand? By the way that Bronco is a beauty. Thanks for posting the pic.

Chris
User avatar
ChaseTruck754
Spy/Ninja
Posts: 9194
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks
Location: Huntington Beach, CA

Re: Early Broncos

Post by ChaseTruck754 »

I'm all for an EB section. I wouldn't mind having one, but it's a bit down the line on the want or project list unless one I can't pas up falls in my lap.

There is a fully cage, slightly stretched, 4 seater version around here with a 4-link, etc. that I would LOVE to own!
Owner of only dead and forgotten projects
Grillmaster
Posts: 11
Joined: Mon Jan 03, 2011 9:43 am
Bronco Info: '68 Bronco - 3.5" SL, 351C 4V, 4 speed toploader

Re: Early Broncos

Post by Grillmaster »

Thanks!

The fuel doors and fenders were done by the previous owner. They are like the 77 doors but one opens backwards. I am about to finish my lift off door hinges tonight.

Next on the list is:
Full cage, Discs in front, rear detroit and front ARB lockers, rocker protection and hydroboost brakes.
User avatar
PBR
Founder
Posts: 996
Joined: Mon Dec 07, 2009 11:21 pm

Re: Early Broncos

Post by PBR »

SteveG wrote:The only reason GFB is mostly comprised of TTB trucks is because they're readily available and they're cheap. If Early Broncos were more plentiful, they would be giving the TTB threads a run for their money! Early Broncos started it all and we would love for GFB to become the go-to site for EB go-fast tech. GFB will never replace some of the larger Bronco sites for general tech and info, but that's not what we're about. There are plenty of sites that can tell you how to change your window regulator. GFB wants to tell you how to eat whoops! And, yeah, we'll help you with the regulator, too.

Campaign speech over!

Ollie, What are you thinking? An EB tech section? Rides?
what about a sub-section inside ride dedicated to eb's? no need to have more than one place to go for eb info, just keep it all there.
Ollie Penchansky
Penchansky Brothers Racing.
User avatar
Nick
Founder
Posts: 3973
Joined: Sat Dec 05, 2009 12:36 pm
Bronco Info: 1995 bird poop target
Location: La Habra Ca.

Re: Early Broncos

Post by Nick »

PBR wrote:
SteveG wrote:The only reason GFB is mostly comprised of TTB trucks is because they're readily available and they're cheap. If Early Broncos were more plentiful, they would be giving the TTB threads a run for their money! Early Broncos started it all and we would love for GFB to become the go-to site for EB go-fast tech. GFB will never replace some of the larger Bronco sites for general tech and info, but that's not what we're about. There are plenty of sites that can tell you how to change your window regulator. GFB wants to tell you how to eat whoops! And, yeah, we'll help you with the regulator, too.

Campaign speech over!

Ollie, What are you thinking? An EB tech section? Rides?
what about a sub-section inside ride dedicated to eb's? no need to have more than one place to go for eb info, just keep it all there.
I agree.
"If at first you don't succeed, it may be cheaper to buy it."
User avatar
SteveG
Admin
Posts: 6177
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
Location: Arroyo Grande, CA

Re: Early Broncos

Post by SteveG »

PBR wrote:what about a sub-section inside ride dedicated to eb's? no need to have more than one place to go for eb info, just keep it all there.
That's what I was thinking. I didn't want to create a section that disassociated EB's and and their owners from the rest of GFB.
Sho nuff,
SteveG
User avatar
SteveG
Admin
Posts: 6177
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
Location: Arroyo Grande, CA

Re: Early Broncos

Post by SteveG »

Done. It's built. Will they come?
Sho nuff,
SteveG
toddz69
Posts: 551
Joined: Thu Dec 10, 2009 7:52 am

Re: Early Broncos

Post by toddz69 »

SteveG wrote:Done. It's built. Will they come?
Thanks Steve!

Todd Z.
Post Reply