2011 Leduc Swapmeet-Febuary 27
- TrevorPiggott
- Posts: 134
- Joined: Thu Dec 10, 2009 2:16 pm
- Bronco Info: 99 F250 and a 1994 I started building but spends too much time sitting untouched...
- Location: Folsom,CA
2011 Leduc Swapmeet-Febuary 27
With only a month to go I thought I would ask the question, who's going? As of right now I'm planning to go down with my brother and dad. Been looking forward to it for over a year (last years plans fell through). Can't wait!
Also,if you plan to sell something, maybe list what your bringing?
Right now I plan on bringing a pair of red Beard seats.
Hope to see and meet some fellow GFB members!
Also,if you plan to sell something, maybe list what your bringing?
Right now I plan on bringing a pair of red Beard seats.
Hope to see and meet some fellow GFB members!
Be nice to me, I'm learning....and slow in the head...
- philofab
- Basura Blanca
- Posts: 5643
- Joined: Tue Dec 08, 2009 9:37 am
- Bronco Info: A pile of crap.
- Location: Bullhead, AZ
- Contact:
Re: 2011 Leduc Swapmeet
I'll be there with a ton of TTB parts, some Toyo tires, blue/black PRP bench, wheels, t-cases, sirens, and much more.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
- Andy Jones
- Posts: 2209
- Joined: Tue Dec 08, 2009 2:47 pm
- Bronco Info: In the Works!
- Location: Canyon Lake,ca
- Contact:
Re: 2011 Leduc Swapmeet
im going! looking for some 12" 2.5 or 3.0 coilovers and a race radio. need one real bad 

dont PM me.. I don't get them on Taptalk
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: 2011 Leduc Swapmeet
I should hopefully be there again. What I will bring depends on what I sell or don't sell before the event
Owner of only dead and forgotten projects
- hobbyturnedobsession
- Posts: 4622
- Joined: Tue Apr 27, 2010 8:34 am
- Bronco Info: 96 c/o w/ 5.0
- Location: High Desert CA
Re: 2011 Leduc Swapmeet
Stupid question but when / where will it be held this year? I've never been?
I'm just here for the views. It helps me feel wanted.
- TrevorPiggott
- Posts: 134
- Joined: Thu Dec 10, 2009 2:16 pm
- Bronco Info: 99 F250 and a 1994 I started building but spends too much time sitting untouched...
- Location: Folsom,CA
Re: 2011 Leduc Swapmeet
"curt leduc off road swap meet is set for febuary 27 at casino morongo, cabazon ca"
RDC thread
http://www.race-dezert.com/forum/showth ... -swap-meet
RDC thread
http://www.race-dezert.com/forum/showth ... -swap-meet
Be nice to me, I'm learning....and slow in the head...
- hobbyturnedobsession
- Posts: 4622
- Joined: Tue Apr 27, 2010 8:34 am
- Bronco Info: 96 c/o w/ 5.0
- Location: High Desert CA
Re: 2011 Leduc Swapmeet-Febuary 27
Thank you sir!
I'm just here for the views. It helps me feel wanted.
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: 2011 Leduc Swapmeet-Febuary 27
I've decided to go ahead and grab a space so I can clean some stuff out of the garage. Philo, Steve, Tony and whoever else, let's meet up again so we can get joining spots. Hopefully no rain this year.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: 2011 Leduc Swapmeet-Febuary 27
I will be coming over the hill from Hemet sometime Saturday night so I won't be there as early as I think you guys will, but I WILL make it! I'm open to splitting a space with someone or something. I don't have much at all to sell but I wouldn't mind brining a couple small things to get rid of.
Side note on that - you gonna make it down SteveG???? I've got a hood and a bunch of wiring sitting here for you.
And since I know I'll forget to ask later/closer to the event - if you see this Brian/Partybarge - you care to bring me whatever I have left at your place? Center console and fuel press. regulator I think is it but I'm not positive anymore...
Side note on that - you gonna make it down SteveG???? I've got a hood and a bunch of wiring sitting here for you.
And since I know I'll forget to ask later/closer to the event - if you see this Brian/Partybarge - you care to bring me whatever I have left at your place? Center console and fuel press. regulator I think is it but I'm not positive anymore...
Owner of only dead and forgotten projects
- philofab
- Basura Blanca
- Posts: 5643
- Joined: Tue Dec 08, 2009 9:37 am
- Bronco Info: A pile of crap.
- Location: Bullhead, AZ
- Contact:
Re: 2011 Leduc Swapmeet-Febuary 27
SteveH: You can use some of my two spots if you want? I'll have room after the first couple of hours.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
- SteveG
- Admin
- Posts: 6142
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: 2011 Leduc Swapmeet-Febuary 27
Maybe, but I don't know. I'll work on getting that stuff out of your way.ChaseTruck754 wrote:Side note on that - you gonna make it down SteveG???? I've got a hood and a bunch of wiring sitting here for you.
Sho nuff,
SteveG
SteveG
-
- Posts: 47
- Joined: Fri Jan 08, 2010 10:07 pm
- Bronco Info: '95 Bronco XLT custom 2.5" lift 32x11.5 BFG AT soon 4 inch and 33's via cut/turn beams
- Location: Rancho Cucamonga, California
- Contact:
Re: 2011 Leduc Swapmeet-Febuary 27
Anyone selling axle gears??? Need 4.56's front and rear and a rear locker!!!!
- tcm glx
- Peanut Butter
- Posts: 7308
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: 2011 Leduc Swapmeet-Febuary 27
yikes wrote:I've decided to go ahead and grab a space so I can clean some stuff out of the garage. Philo, Steve, Tony and whoever else, let's meet up again so we can get joining spots. Hopefully no rain this year.
Lets do it B! Was a blast last year. How about we BBQ again..... like we did two years ago.
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: 2011 Leduc Swapmeet-Febuary 27
Thinking about bringing the trailer too! Can bring my dad's generator so we can have lights and heat! It's noisy, but who cares.tcm glx wrote:yikes wrote:I've decided to go ahead and grab a space so I can clean some stuff out of the garage. Philo, Steve, Tony and whoever else, let's meet up again so we can get joining spots. Hopefully no rain this year.
Lets do it B! Was a blast last year. How about we BBQ again..... like we did two years ago.
- philofab
- Basura Blanca
- Posts: 5643
- Joined: Tue Dec 08, 2009 9:37 am
- Bronco Info: A pile of crap.
- Location: Bullhead, AZ
- Contact:
Re: 2011 Leduc Swapmeet-Febuary 27
I will be bring the propane heaters again.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: 2011 Leduc Swapmeet-Febuary 27
careful of those - they melt jackets!
Owner of only dead and forgotten projects
- tcm glx
- Peanut Butter
- Posts: 7308
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: 2011 Leduc Swapmeet-Febuary 27
I need to share a spot with someone... anyone game.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: 2011 Leduc Swapmeet-Febuary 27
thought you were sharing with Chris?
Owner of only dead and forgotten projects
- philofab
- Basura Blanca
- Posts: 5643
- Joined: Tue Dec 08, 2009 9:37 am
- Bronco Info: A pile of crap.
- Location: Bullhead, AZ
- Contact:
Re: 2011 Leduc Swapmeet-Febuary 27
I'm subletting spots. I have Steve, Kieth from Fast Fabrication, and maybe you? I only charge $45 for half a spot and my "protection" fee. Lol.tcm glx wrote:I need to share a spot with someone... anyone game.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/