Stainless Braided Brake Lines?

[Andy Jones]

im getting ready to purchase some JBG stainless lines for my 95 Bronco.http://broncograveyard.com/images/catal ... KLINES.JPG
they say the one in the picture i provided are for my application. i just cant seem to figure out what the little threaded piece on the female end of the second line in the pic that connects to the factory line is for? my stock lines have nothing that resembles anything like that.. both my lines seem to connect to the frame?

[philofab]

im getting ready to purchase some JBG stainless lines for my 95 Bronco.http://broncograveyard.com/images/catal ... KLINES.JPG
they say the one in the picture i provided are for my application. i just cant seem to figure out what the little threaded piece on the female end of the second line in the pic that connects to the factory line is for? my stock lines have nothing that resembles anything like that..

Lines are different from ABS and non ABS trucks.

One set has a "T" built in for the line to run to the other side. The other does not.

[Andy Jones]

so does the ABS have the t or not? here's a pic of my lines.
driver side:
passenger side:

[philofab]

Looks like your truck has ABS to me. Those lines above are for NON abs.

[Dezertbronco]

Just a FYI alot of issues with JBG right now, Kartek had them in stock last week for ,$90

[Andy Jones]

Sweet Thanks Philo! and thanks for the heads up Dezertbronco.

Guess im giving Baja Mike a call in the Morning!

[philofab]

I ordered the ones above for my Bronco and they did not work. They will however work for the Crew so I kept them.

[Dezertbronco]

Baja is the man...

[hobbyturnedobsession]

They have them in at Kartek now? They didn't a few months ago. Awesome! Looks like I'll give him a call too then.

[Clean Racing INC.]

im getting ready to purchase some JBG stainless lines for my 95 Bronco.http://broncograveyard.com/images/catal ... KLINES.JPG
they say the one in the picture i provided are for my application. i just cant seem to figure out what the little threaded piece on the female end of the second line in the pic that connects to the factory line is for? my stock lines have nothing that resembles anything like that.. both my lines seem to connect to the frame?

Why Not call Crown Performance direct down in San Diego and have them made for your rig. Skip the middle men that could screw it up..
http://www.crownperformance.com/

[shockseals.com]

im getting ready to purchase some JBG stainless lines for my 95 Bronco.http://broncograveyard.com/images/catal ... KLINES.JPG
they say the one in the picture i provided are for my application. i just cant seem to figure out what the little threaded piece on the female end of the second line in the pic that connects to the factory line is for? my stock lines have nothing that resembles anything like that.. both my lines seem to connect to the frame?

Why Not call Crown Performance direct down in San Diego and have them made for your rig. Skip the middle men that could screw it up..
http://www.crownperformance.com/

Crown, Bonaco, G&J...about $25 ea for a custom bronco brake line 2 feet long.

[ChaseTruck754]

Mesa Hose in Costa Mesa. 2 minutes from my shop so they do all my stuff. I like doing the rebuild-able ones so if you chafe a line or something like that you can fix it in the boonies.

[Andy Jones]

They have them in at Kartek now? They didn't a few months ago. Awesome! Looks like I'll give him a call too then.

Baja said they have two sets left! i grabbed one!

[hobbyturnedobsession]

Thanks Andy!

[Andy Jones]

No worries!! Grab'em while there HOT!!!