E4OD information needed.

Needles929 · Post by **Needles929** » Wed Aug 21, 2019 8:59 am

Hey guys,

Can someone fill me in on the differences between a 95' and 96' E4OD? I have a 96' core that I am going to have rebuilt to put in my 95'. I'm getting crossed information on this locally. Also, for those with experience, what upgrades are a must?

Becks_Bronco · Post by **Becks_Bronco** » Wed Aug 21, 2019 10:12 am

Punisher valve body for sure!

mustacheride · Post by **mustacheride** » Wed Aug 21, 2019 11:54 am

I rebuilt a 96' out of a F150 and put it in my 91'. I had to change the shift solenoid, but 95 to 96 should be the same.

I believe in 96' they made a lot of internal upgrades, but nothing that would effect the swap.

Becks_Bronco · Post by **Becks_Bronco** » Wed Aug 21, 2019 3:20 pm

http://shop.ukrtrans.biz/wp-content/upl ... UPDATE.pdf

Found this, might be more than you need to know. I takes a while to upload, so i saved it to a PDF on my desktop. If it won't load from that link, i can email it to you.

Needles929 · Post by **Needles929** » Wed Aug 21, 2019 3:26 pm

Becks_Bronco wrote:http://shop.ukrtrans.biz/wp-content/upl ... UPDATE.pdf

Found this, might be more than you need to know. I takes a while to upload, so i saved it to a PDF on my desktop. If it won't load from that link, i can email it to you.

Awesome!! It loaded right up for me. Time for some reading! lol

mobil1syn · Post by **mobil1syn** » Thu Aug 22, 2019 3:27 pm

steel pantenaries. high possibility yours are aluminium

Becks_Bronco · Post by **Becks_Bronco** » Fri Aug 23, 2019 9:53 am

mobil1syn wrote:steel pantenaries. high possibility yours are aluminium

I was reading that you can use a lot of parts from the super duty's 4R100.

Becks_Bronco · Post by **Becks_Bronco** » Fri Aug 23, 2019 9:55 am

Lots of good upgrade recommendations in this article too;

http://www.fourwheeler.com/how-to/trans ... -road-use/

I'm going to print and save this for if/when mine needs a rebuild.

Needles929 · Post by **Needles929** » Fri Aug 23, 2019 3:19 pm

Becks_Bronco wrote:Lots of good upgrade recommendations in this article too;

http://www.fourwheeler.com/how-to/trans ... -road-use/

I'm going to print and save this for if/when mine needs a rebuild.

That was a great article!! Definitely discussing this with my tranny guy.

RyanDS650X · Post by **RyanDS650X** » Sat Aug 24, 2019 8:32 am

Needles929 wrote:
Becks_Bronco wrote:Lots of good upgrade recommendations in this article too;

http://www.fourwheeler.com/how-to/trans ... -road-use/

I'm going to print and save this for if/when mine needs a rebuild.
That was a great article!! Definitely discussing this with my tranny guy.

That is what's in mine with an additional friction clutch in the OD pack

Sent from my SM-G960U using Tapatalk

E4OD information needed.

E4OD information needed.

Re: E4OD information needed.

Re: E4OD information needed.

Re: E4OD information needed.

Re: E4OD information needed.

Re: E4OD information needed.

Re: E4OD information needed.

Re: E4OD information needed.

Re: E4OD information needed.

Re: E4OD information needed.