Nothing special class3 pics

ChaseTruck754 · Post by **ChaseTruck754** » Mon Jan 04, 2016 12:41 pm

Very nice! And much closer than I am.

I wish I got in the garage that night, but we had a bunch of family over so it didn't happen. Holidays kinda killed my shop time even more than usual. I am just now re-doing something I have very recently done today, which is really annoying. But hey, at least the 4 days straight of rain we are supposed to get hasn't hit yet so I am able to be messing with this.

ESHALLBETTER · Post by **ESHALLBETTER** » Fri May 20, 2016 10:15 am

Starting to make spaghetti!

I bought a label printer that prints on heatshrink and it's super rad.

Sent from my iPhone uhxkknmhjjljqkngkbmdmmnhojkhoxhccfXjsing Tapatalkomn

BDKW1 · Post by **BDKW1** » Fri May 20, 2016 10:46 am

ESHALLBETTER wrote:I bought a label printer that prints on heatshrink and it's super rad.

Link?

ESHALLBETTER · Post by **ESHALLBETTER** » Fri May 20, 2016 10:49 am

http://www.amazon.com/gp/aw/d/B002M1HKL ... ref=plSrch

Sent from my iPhone uhxkknmhjjljqkngkbmdmmnhojkhoxhccfXjsing Tapatalkomn

ESHALLBETTER · Post by **ESHALLBETTER** » Fri May 20, 2016 10:49 am

Sent from my iPhone uhxkknmhjjljqkngkbmdmmnhojkhoxhccfXjsing Tapatalkomn

300 · Post by **300** » Fri May 20, 2016 11:47 am

Haha, I have been using a heat shrink printer for work for about 15 years! The one I have is now obsolete and I bought up all the tubing stock I could find, which is probably useless because I probably can't get the ink ribbons anymore. This Dymo system is about 10% of the price I paid back then. I like it.

ESHALLBETTER · Post by **ESHALLBETTER** » Fri May 20, 2016 2:24 pm

AND ITS ABOUT DAMNED TIME!!!

https://vimeo.com/167489614

Awesome day today. This has been a long time coming and makes me super excited to keep working on it!

Sent from my iPhone uhxkknmhjjljqkngkbmdmmnhojkhoxhccfXjsing Tapatalkomn

funinthesun95 · Post by **funinthesun95** » Fri May 20, 2016 4:26 pm

Post by **SteveG** » Fri May 20, 2016 7:43 pm

I'm digging that printer! Nice job.

BDKW1 · Post by **BDKW1** » Fri May 20, 2016 10:55 pm

Very nice!

ESHALLBETTER · Post by **ESHALLBETTER** » Sat Jun 11, 2016 5:55 am

Got a few hours yesterday to head out to the shop. Got the brakes on the rear axle and got all the chassis side brake plumbing done. My SS lines for all the moving parts were supposed to be here Friday but never showed so I hope to finish it up next week.

Sent from my iPhone uhxkknmhjjljqkngkbmdmmnhojkhoxhccfXjsing Tapatalkomn

BDKW1 · Post by **BDKW1** » Sat Jun 11, 2016 12:32 pm

High spots in the lines are good places for bubbles to hide. High spots should be at each end. If you have a T for a brakelight pressure switch, the switch should be facing down so that it doesn't trap air.

Just some observations from past headaches.......

ESHALLBETTER · Post by **ESHALLBETTER** » Sat Jun 11, 2016 2:18 pm

Never done brake line clean slate before. Thanks for the heads up.

Sent from my iPhone uhxkknmhjjljqkngkbmdmmnhojkhoxhccfXjsing Tapatalkomn

ESHALLBETTER · Post by **ESHALLBETTER** » Fri Apr 28, 2017 3:17 pm

Did a little wiring today. It's a good way to pass time! Visual progress is slow, but I'm trying to be really thorough in mapping things out, checking continuity, and documenting...

ESHALLBETTER · Post by **ESHALLBETTER** » Fri Apr 28, 2017 3:18 pm

Whoops, doubled up on the last pic with no edit....

ChaseTruck754 · Post by **ChaseTruck754** » Fri Apr 28, 2017 3:52 pm

That is looking nice! Wanna come do mine? I'm dreading wiring.

I don't hate it when I get into it & it's a very good way to be OCD but it just takes FOREVER to do it cleanly & document all!

Post by **SteveG** » Tue May 02, 2017 10:19 pm

ESHALLBETTER wrote:

Sent from my iPhone uhxkknmhjjljqkngkbmdmmnhojkhoxhccfXjsing Tapatalkomn

So I want to order one of these for work. What tubing do I buy???

Post by **SteveG** » Tue May 02, 2017 10:21 pm

ESHALLBETTER wrote:Did a little wiring today. It's a good way to pass time! Visual progress is slow, but I'm trying to be really thorough in mapping things out, checking continuity, and documenting...

That intercom is way too old-school. PM me so we can upgrade you into something modern with some cool features... use and abuse your friendships!

ESHALLBETTER · Post by **ESHALLBETTER** » Wed May 03, 2017 6:43 pm

Hi Steve,

Amazon is the best place to get it. About 10-15 bucks less than what I paid at Grainger (needed it same day....)

https://www.amazon.com/DYMO-Industrial- ... dymo+18053

PM'ed on the intercom

PaulW · Post by **PaulW** » Thu May 04, 2017 8:28 am

Eric, I am very impressed with your wiring. This is the first time I have discovered the Dymo. My projects are so time limited my marking is way crude. While you an I would disagree on many wiring tools and connections. Your result is way better than mine. Be proud on your very professional result.
Paul