MISC PARTS

[De$ertBronco]

All of the following parts were either new or lightly used for my 95 fullsize bronco 5.8 cali w/maf: Threat 4.5"+ beams and radius arms with all the bells and whistles, stock 5 bolt knuckles and brakes, rebuilt third member open diff with 4.88 gears, brand new currie axles with new spicer u joints (they were ordered incorrectly and are about 1/2" too long and need to be machined down), kelfab single swing steering setup w/ redhead steering box, giant engine cage, fiberwerx 4.5" fenders, core support w/ headlights/trans cooler and such, stock engine harness and pcm, stock heater box, a/c condenser, brand new edelbrock performer intake, brand new bassani headers & modified y pipe, K&N intake setup... probably more stuff lying around too. Come make offers, bulk buys will be beneficial for both parties! located in carlsbad, ca. Email me for photos and more info if you are serious.

[dtbback]

Text sent on the KelFab swinger and Edelbrock.

[De$ertBronco]

all replies are stuck in my outbox for some reason. Email me at dezert.bronco@gmail.com.... I forgot to mention i have a new bbk twin 56mm throttle body on that edelbrock intake.

[De$ertBronco]

stock engine harness for the 95 is sold along with the K&n intake. LOTS of emails to go through and i am super busy at work. I figured i would take a second and just post prices finally.

I have a brand new mcqueen black gel coat parabeam 2 pin hood for sale $400
trying to sell my lightly used front end complete with swing steering, third member, brakes, axles, gear box for $2500
edelbrock intake with bbk twin 56mm throttle body, ford IAC, bbk fuel rails, bbk regulator, lightning 42lb injectors, lightning 90mm MAF for $1200 willing to seperate but prefer complete, everything new
TwEECer module (has a unique base tune, would need new base tune which is only $75 from them) $200
brand new bassani ceramic coated shorty headers and stainless steel y-pipe (off-road version without cats, also removed thermactor tubes) $500
used but good condition fiberwerx 4.5"+ fenders $250
core support (no headlights mounting panel, but will include headlights, condenser, trans cooler) $80
2 complete heater boxs (1 has been clearanced for bigger tires) $50
engine harness for 92 bronco 5.8 $80
pcm for 92 bronco 5.8 $50
pcm for 95 bronco 5.8 maf $80
misc bullshit lying around $OBO

[96UAV]

Email sent

[LvSteve]

Emailed you

[De$ertBronco]

Here is what is left:

(1) brand new Toyo 37x13.50r17 Open Country M/T $250

brand new McQueen black gel coat parabeam 2 pin hood for sale $400

lightly used Threat Motorsports 4.5"+ beams with billet ends, bash plate and truss, swing steering, third member w/ 4.88 gears, brakes, currie axles, red head gear box for $2500 obo

Giant Motorsports coilover engine cage w/ tig welded dimple die crossmember $400 obo

brand new Bassani ceramic coated shorty headers and stainless steel y-pipe for 351w (no cats, thermactor tubes removed) $500

used good condition Fiberwerx 4.5"+ fenders $200 obo

core support (no headlights mounting panel, but will include headlights, condenser, trans cooler) $80 obo

complete heater box $50 obo

engine harness and ECU for 92 bronco 5.8 $120 obo

instrument cluster for 95 bronco 5.8 $50 obo

transfer case shift control module (FITB-7E453-AA) $50 obo

[De$ertBronco]

bw1356 electric transfer case $100

[De$ertBronco]

transfer case is gone

[biggiek]

Where in so cal are you? I'm interested in the cage.

[biggiek]

Coilover mount cage.

[Zodi]

I'm interested in the 4.5 front end please text me at 8589254442

[De$ertBronco]

Here is what is left:

(1) brand new Toyo 37x13.50r17 Open Country M/T $250

brand new McQueen black gel coat parabeam 2 pin hood for sale $400

core support (no headlights mounting panel, but will include headlights, condenser, trans cooler) $80 obo

complete heater box $50 obo

engine harness and ECU for 92 bronco 5.8 $120 obo

instrument cluster for 95 bronco 5.8 $50 obo

transfer case shift control module (FITB-7E453-AA) $50 obo

[Zodi]

Thank you Josh! I appreciate your help buddy

[keenanduran1]

PM Sent

[carlover]

Any pics of the hood?

[De$ertBronco]

Sorry I haven't checked my ad for responses in a while. I have some odds and ends here and there that I may post up, but pretty much the only thing left from this ad is the mcqueen hood. I have gone back and forth on whether to sell it since it's so bad ass, but we have decided to do a tilt-up one piece. This is the only picture I have of it right now... just dirty up in the rafters.

Attach3.jpg

[squiggy_bum]

Would like to buy cage, can come tonight or tomorrow or Sunday

[De$ertBronco]

Would like to buy cage, can come tonight or tomorrow or Sunday

everything is sold except the hood.

[biggiek]

That hood is sweet! Does it mount to factory hinges?