Cleaning out the barn

User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Cleaning out the barn

Post by zachwabbit »

Got a bunch of parts I don't need, should get rid of them before I'm tempted to pick up something else to slap them on hah. Will add more things to the list as I find them

-one pair of used 4" coils, make offer
-one pair used Bilstein 5100s for front 4" lift, make offer
-set of red poly pivot bushings new in package, $28
-pair of used front braided steel brake lines, free if you buy something else
-good chrome factory rear bumper with step pads, $80 with LED license plate bulbs
-pair of brand new never used Ruff Stuff heims, $135
-one factory Alcoa with a camber worn 33x12.5 BFG AT/KO, no center cap, straight with no bends or cracks, $80
Potato.
damon1272
Posts: 700
Joined: Tue Dec 15, 2009 8:35 pm

Re: Cleaning out the barn

Post by damon1272 »

what size is the heir?
User avatar
tanneraz21
Posts: 22
Joined: Tue Jul 21, 2015 5:55 pm
Bronco Info: 1987 Bronco XLT 5.0
Location: Arizona

Re: Cleaning out the barn

Post by tanneraz21 »

PMd about the bilsteins
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

damon1272 wrote:what size is the heir?

If I remember right they're 1.25". I'll double check for you later
Potato.
damon1272
Posts: 700
Joined: Tue Dec 15, 2009 8:35 pm

Re: Cleaning out the barn

Post by damon1272 »

K. If so I could stop by your work if that's ok.
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

damon1272 wrote:K. If so I could stop by your work if that's ok.
Yupp they're 1.25". Bumper is gone, also have brand new pair of alignment cams, and a full set of Napa blue booted ball joints.
Potato.
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

Feel free to text me about parts, 619-772-2832
Potato.
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

Heims are gone
Potato.
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

Found my receipt so prol just gonna return the ball joints unless someone wants to pay what I got em for. Have a pair of used leveling coils and used Bilsteins to go with them, think they're old 4600s, pretty worn. Coils are good but shocks would just be best as temporary's, took em out of my F150 cuz they were super squish lol
Potato.
User avatar
87SLbronco
Posts: 38
Joined: Sat Jul 21, 2012 1:04 pm
Bronco Info: 1987 Bronco Custom, 5.0 swap, 4spd, pretty much stock for now.
Location: Kalamazoo, MI
Contact:

Re: Cleaning out the barn

Post by 87SLbronco »

how much for the leveling kit? Any idea on what make? Also willing to ship?
"Stroke it, blow it, and spray it. It will be a short ride, but it sure would be a blast."
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

87SLbronco wrote:how much for the leveling kit? Any idea on what make? Also willing to ship?
Don't know what make the springs are. I'll sell the coils with old correct height Bilsteins for $80. But honestly man after shipping it might not be worth it for you since these shocks are going to need to be replaced soon anyway
Potato.
User avatar
87SLbronco
Posts: 38
Joined: Sat Jul 21, 2012 1:04 pm
Bronco Info: 1987 Bronco Custom, 5.0 swap, 4spd, pretty much stock for now.
Location: Kalamazoo, MI
Contact:

Re: Cleaning out the barn

Post by 87SLbronco »

Fair enough, appreciate the quick response.
"Stroke it, blow it, and spray it. It will be a short ride, but it sure would be a blast."
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

No worries. The cheapest decent quality setup to level it would be used or new coils, I think they're like $130 new if I remember right. And Bronco Graveyard shocks. The JBG shocks are supposedly made by BDS(so the rumor goes), and aren't anything special, but they're the cheapest shocks you can get that aren't complete trash. I think I paid like $30 if not less each. Upgrading soon, but they're better than blown out but brand stuff
Potato.
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

Need this stuff gone asap. Changed my phone number too
Potato.
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

Also pair of brand new alignment cams $55. Leveling coils with used Bilsteins $100. 2 '70s F250 Camper Special wide factory steelies, make offer. Four matching steelies with Ford hub caps and worn tires off 2012-17 Focus, $80. My new cell number is 619-995-2445
Potato.
User avatar
zachwabbit
Posts: 784
Joined: Thu Oct 01, 2015 9:48 pm
Bronco Info: '93 F150 4x4, ‘23 Bronco 2dr
Location: San Diego, CA

Re: Cleaning out the barn

Post by zachwabbit »

Alignment cams, ball joints, leveling kit, 4" coils, pivot bushings, and brake lines are gone
Potato.
Post Reply