Yukon 8.8 spider gears

Tchajagos · Post by **Tchajagos** » Thu Oct 22, 2015 7:59 am

I have a few sets of spider gears. Yukon 31 spline for the 8.8 with limited slip. These are a bit beefier than stock. Let's face it, your stock spider gears are probably worn out and have chipped teeth. Upgrade to these heavier duty parts. Summit has these listed for $211. I'm looking to get $150 for each set. These are brand new still in the box. I can install them for an additional $150.

You can see the stock design is thinner and these ones are chipped and worn out with only 150k miles.

Tchajagos · Post by **Tchajagos** » Thu Oct 22, 2015 8:01 am

Tchajagos · Post by **Tchajagos** » Sat Oct 24, 2015 4:03 am

These don't take too much time to install and you don't have to re adjust anything. The longest part is waiting for the silicon to set up before filling your axle with gear oil.

95bronco12 · Post by **95bronco12** » Sat Oct 24, 2015 11:29 am

Have any clutch packs with them? Interested give me a text.

Tchajagos · Post by **Tchajagos** » Sun Oct 25, 2015 9:20 pm

Only have 1 left.

Tchajagos · Post by **Tchajagos** » Thu Oct 29, 2015 8:56 pm

Tchajagos · Post by **Tchajagos** » Fri Nov 06, 2015 4:55 am

Bump. Still have one left.