94 Raptor killer
-
PaleRider
- Posts: 193
- Joined: Sun Aug 10, 2014 1:40 am
- Bronco Info: 1994 Bronco with aftermarket lift, BroncoAir bumpers
94 Raptor killer
Amazing pics. Good news no injuries. Did the rear top survive? Thank you for the feedback from your crash.
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
The cab forward took a brunt of the impact. The cab survived the window popped out with out breaking haha. The rear pass fiberglass remained intact as well.
Unfortunately there was an injury. As I said before ensure your passengers are harnessed in properly. We were lap belted my rear passenger had tried to readjust his belt and was not completely harnessed when we rolled and hit his head on a cage tube. Fortunately only stitches and he is the nicest dude ever so we are still great friends. It was a tough lesson to learn the hard way that as fun as the hobby is it is a huge amount of responsibility anytime you behind the wheel.
Unfortunately there was an injury. As I said before ensure your passengers are harnessed in properly. We were lap belted my rear passenger had tried to readjust his belt and was not completely harnessed when we rolled and hit his head on a cage tube. Fortunately only stitches and he is the nicest dude ever so we are still great friends. It was a tough lesson to learn the hard way that as fun as the hobby is it is a huge amount of responsibility anytime you behind the wheel.
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
Currently in the works, Paxton Super charger fed via UMP. Still gathering the last few parts.


- Tanner287
- Posts: 711
- Joined: Sun Oct 28, 2012 2:36 pm
- Bronco Info: 95 351 4.5" beams full cage front to rear 9" q80 deavers
- Location: Acton ca
Re: 94 Raptor killer
Wow that is insane! Makes me happy I have mine caged. Awesome to see you got it going again.
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
Happy Halloween!!

- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
- Andy Jones
- Posts: 2209
- Joined: Tue Dec 08, 2009 2:47 pm
- Bronco Info: In the Works!
- Location: Canyon Lake,ca
- Contact:
94 Raptor killer
Awesome!
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
Finally got the light mounted and wired woohoo!

- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: 94 Raptor killer
Hell yeah Brian!! When's the born again run hapnin?!
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
Saturday mornin! Taking it out to my buddies place in the boonies out past superstition.
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
Last time I went out there was the time I learned you can't flat tow with the driveshaft connected
-
Rmc
- El Jefe
- Posts: 6028
- Joined: Tue Oct 09, 2012 10:22 pm
- Bronco Info: 94 bronco xlt prerunner
- Location: IE SoCal
- Contact:
Re: 94 Raptor killer
Hell ya! Congrats man! So is it all tuned after the supercharger install too? It looks great btw
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
The Paxton Supercharger kit doesn't call for any tuning. It utilizes a fuel management unit(FMU) to increase fuel with boost. Simple system but it works. Though the Paxton kit doesn't call for it I will be adding a 255lph pump so there will always be plenty of fuel as well as an Msd boost retard box that will allow me to retard the timing if I run intoany issues with
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
Detonation. I'm sure I could get a few more ponies by getting it tuned but I'm aka out keeping it simple. I'm sure the engineers at Paxton did there home work before releasing it to the public
-
Rmc
- El Jefe
- Posts: 6028
- Joined: Tue Oct 09, 2012 10:22 pm
- Bronco Info: 94 bronco xlt prerunner
- Location: IE SoCal
- Contact:
Re: 94 Raptor killer
I'm curious to see how it works. If it's a big improvement I will probably follow suit.
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
I'm gonna dyno before and after. No tune just pulls. $150 for 2 pulls a a dyno by my house. I'm not worried about tuning but it'll give me a chance to check A/F and easier to here and det with out the bypasses clacking in my ear haha
Keep your eyes peeled these kits are not easy to come by. All the kits, kennybell, vortech, Paxton are discontinued. Kennybell would be ideal but if you find any of them snatch it up quick.
Keep your eyes peeled these kits are not easy to come by. All the kits, kennybell, vortech, Paxton are discontinued. Kennybell would be ideal but if you find any of them snatch it up quick.
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
8 hours till maiden voyage of Raptor Killer 2.0 

-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
Had a good trip out at my buddy's place in Gold Rock Ranch. Real rough compared to Ocotillo and not very many distinct trails so I didn't get to really open it up. I found a couple pretty fun little kickers to get some air though. Got a puncture in one tire and I broke a u-joint and didn't realize till I took the drive shaft off to flat tow home. Overall a great trip! 

https://vimeo.com/145820682


https://vimeo.com/14582068294 Raptor killer
Awesome! Congrats bud!
-
cs_drums
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
94 Raptor killer
Thanks for your help with the rebuild too!
