Deaver 5.5" coil springs
- 96UAV
- Posts: 192
- Joined: Sat Jun 23, 2012 10:55 am
- Bronco Info: 96 XLT --Under Construction--
- Location: Phoenix, AZ
Deaver 5.5" coil springs
Used these once to mock up and put about 25 miles on them. A few nicks in the powder coat from install and removal.
Going to run Solo c/o soon so no need for these laying around anymore.
Asking 150. Bronco Graveyard sells em new for 179 + shipping.
Would prefer local pickup in Phoenix area.
Going to run Solo c/o soon so no need for these laying around anymore.
Asking 150. Bronco Graveyard sells em new for 179 + shipping.
Would prefer local pickup in Phoenix area.
- hooter95
- Posts: 9
- Joined: Sun Oct 19, 2014 1:01 pm
- Bronco Info: 95, 5.0 and M5OD, Solo Motorsports cut and turned beams with heimed radius arms, Deaver j40 springs
Re: Deaver 5.5" coil springs
Would friday or saturday work for buying off ya?
Text me: 928 202 six four 35
Text me: 928 202 six four 35
Re: Deaver 5.5" coil springs
Possible to meet this weekend?96UAV wrote:Used these once to mock up and put about 25 miles on them. A few nicks in the powder coat from install and removal.
Going to run Solo c/o soon so no need for these laying around anymore.
Asking 150. Bronco Graveyard sells em new for 179 + shipping.
Would prefer local pickup in Phoenix area.
Re: Deaver 5.5" coil springs
Im in gilbert.
- 96UAV
- Posts: 192
- Joined: Sat Jun 23, 2012 10:55 am
- Bronco Info: 96 XLT --Under Construction--
- Location: Phoenix, AZ
Re: Deaver 5.5" coil springs
Gilbert is quite a ways from me but Im open to meeting. Im near 67th ave and Happy Valley. I work till 7ish on saturday. Open Sunday. Let me know what works.
Re: Deaver 5.5" coil springs
Cool I will post tomorrow and see what we can do about sunday. Waiting to hear back if this will work with what I have.
- 96UAV
- Posts: 192
- Joined: Sat Jun 23, 2012 10:55 am
- Bronco Info: 96 XLT --Under Construction--
- Location: Phoenix, AZ
Re: Deaver 5.5" coil springs
Sounds good.biggiek wrote:Cool I will post tomorrow and see what we can do about sunday. Waiting to hear back if this will work with what I have.
-
- Posts: 117
- Joined: Sun Jun 01, 2014 7:01 pm
- Bronco Info: 1988 F150 4x4 Short wheel base
Re: Deaver 5.5" coil springs
Any chance these are still hanging around?
- 96UAV
- Posts: 192
- Joined: Sat Jun 23, 2012 10:55 am
- Bronco Info: 96 XLT --Under Construction--
- Location: Phoenix, AZ
Re: Deaver 5.5" coil springs
Indeed they are.Mr. VanDii wrote:Any chance these are still hanging around?
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
Deaver 5.5" coil springs
Just a heads up, you can use these with solo cut/turn. They do settle a bit and sit just a tad higher than 4" which is fine with alignment cams.
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: Deaver 5.5" coil springs
You can pull the factory spring perches off the beam and get the 4" height with the 5.5" progressive spring too, thats what i run. I love these springs.
'96 XLT 5.8l lil edelbrock, lil Autofab, LOTTA fun.
"I wouldnt even call adding beer as part of a prep...its like putting tires on the vehicle, you just do it."
-shockseals.com
"I wouldnt even call adding beer as part of a prep...its like putting tires on the vehicle, you just do it."
-shockseals.com
Re: Deaver 5.5" coil springs
These would be nice on my reecnt C&T...
- 96UAV
- Posts: 192
- Joined: Sat Jun 23, 2012 10:55 am
- Bronco Info: 96 XLT --Under Construction--
- Location: Phoenix, AZ
Re: Deaver 5.5" coil springs
Im running 2.5 King coil overs. Somebody needs these!!