1982 F150 stepside 4x4

Tchajagos · Post by **Tchajagos** » Wed Jun 03, 2015 9:29 pm

Super rad truck! 1982 f150 reg cab stepside short bed. 4x4!!! Auto with manual xfer case. I think it's a 5.0 V8. Not really sure, might be 5.8. The body is rust free and straight. One dent on the whole truck which is on the roof and can be popped out. I might just do that. The paint is some kind of dark green or teal. Clear coat pealing off though. The bed is perfect. No dents or cracks at all. The interior is a bit dirty. Dash is cracked and a rip in the seat on driverside (typical wear) the door panels are not cracked but can use a cleaning. All windows are good with no cracks. Doors all work. Has tilt steering wheel and factory ac. Has. 85k in the tach. Engine turns freely

The axles are D44 TTB up front with the very hard to find bolt in passenger axle that everyone wants. 6 bolt snouts. The rear is a ford 9" 31 spline full size width.

The bad:
-missing a few parts.
-driverside head
-radiator+hoses
-distributor
-power steering pump
-alternator
-water pump
-battery

Pros-

-Hard to find the stepside beds in this perfect of condition.
-v8
-auto
-4x4!!!!
-factory ac
-looks rad
-will drop panties.

Looking to get $2000 for this sweet ride. Sold as is for parts with bill of sale. I can get a title but it will be a few weeks and I will need a deposit. If I can't sell in a few weeks I am gonna part it out and bring in more than that. If you want to buy the truck I would be happy to install any parts that you bring me to get it running. I would even be willing to grab the parts from the pick a part for the cost of the parts.

otter · Post by **otter** » Wed Jun 03, 2015 10:53 pm

My dream truck! If I wasn't moving to Hawaii, this would be in my garage already. If its still for sale in 3 yrs, I'll take it.

Tchajagos · Post by **Tchajagos** » Thu Jun 04, 2015 12:29 am

It's a really cool truck. I ran the door codes to make sure what it has. It has the 5.0 V8 and a C6 auto trans. The rear 9" is limited slip with 3.50 gears.

robertcrav · Post by **robertcrav** » Thu Jun 04, 2015 4:43 am

LOVE stepsides!!

Tchajagos · Post by **Tchajagos** » Thu Jun 04, 2015 9:27 am

they are pretty cool.

Tchajagos · Post by **Tchajagos** » Fri Jun 05, 2015 12:58 pm

If anyone is interested in parts off this truck I will more than likely be parting it out next week if no one wants it whole.

Front D44 knuckles/spindles/calipers/rotors/hubs - $200 for the pair

Rear 9" 3.50 gears limited slip - $500

C6 4x4 auto trans w/ converter -$300

Manual transfer case - $200

Step side bed - $500

Cab/doors/interior - $200

Front clip - $200

Short wheelbase 4x4 frame - $200

dtbback · Post by **dtbback** » Fri Jun 05, 2015 3:04 pm

Someone needs to pick this thing up whole and built her right

robertcrav · Post by **robertcrav** » Fri Jun 05, 2015 3:10 pm

how much would someone charge to put my drivetrain and suspension under this thing???

Tchajagos · Post by **Tchajagos** » Fri Jun 05, 2015 3:18 pm

Tchajagos · Post by **Tchajagos** » Fri Jun 05, 2015 3:19 pm

I would feel so bad having to part out this all original truck.

dtbback · Post by **dtbback** » Fri Jun 05, 2015 8:05 pm

If I wasn't building my bronco I would scoop this thing up! I have a ton of parts I can use on it too lol!! Don't Part It out!!!

birdco85 · Post by **birdco85** » Sun Jun 07, 2015 4:17 pm

Does the $200 for the front d44 include the third? I'll take it. Or how much for it?

Tchajagos · Post by **Tchajagos** » Mon Jun 08, 2015 4:10 am

3rd is spoken for already. $200 is for the knuckles out.

hollandermotorsports · Mon Jun 08, 2015 7:25 am

859538_592124217482040_118142942_o (1).jpg

I will just leave this here. This is my old step side sleeper that I should have never sold. Whats the best price would do? Not that I need another project but now my wheels are spinning.

toddz69 · Post by **toddz69** » Mon Jun 08, 2015 9:26 am

Brandon: I think the guy in Tucson that bought the truck is interested in selling it.

Todd Z.

hollandermotorsports · Mon Jun 08, 2015 3:19 pm

toddz69 wrote:Brandon: I think the guy in Tucson that bought the truck is interested in selling it.

Todd Z.

Really? Hmm now why did you have to feed the hamster. lol. I do not have any of his contact but if you here about it going up for sale please let me know or give him my number.

Thank you!

Brandon Hollander
760-803-9469

Tchajagos · Post by **Tchajagos** » Tue Jun 09, 2015 1:07 am

Brandon that truck looks really good. Is it true that these trucks use the same rear fenders as the duallies? I am actually amazed at how straight the bed is on this one.

hollandermotorsports · Tue Jun 09, 2015 11:41 am

Tchajagos wrote:Brandon that truck looks really good. Is it true that these trucks use the same rear fenders as the duallies? I am actually amazed at how straight the bed is on this one.

My old flareside was a 1 piece bed side. But yours yes same as dually.

Wrightracing.net · Post by **Wrightracing.net** » Wed Jun 10, 2015 7:08 am

Sometimes I think we all on here are worse than crack dealers feeding others addictions. Ha...

D1cker1 · Post by **D1cker1** » Thu Jun 11, 2015 11:39 pm

robertcrav wrote:how much would someone charge to put my drivetrain and suspension under this thing???

Do it