Prerunner Bronco Pic Post-& other cool stuff too...

Post Reply
User avatar
BDKW1
Posts: 1518
Joined: Mon Jun 14, 2010 1:19 pm
Bronco Info: It's the new and inproved Party Barge!
Location: Not Socal

Re: Pic post

Post by BDKW1 »

Donaldson heavy equipment filters and UMP plenum. These are what the UMP's were designed after. These are a little larger than the normal UMP. They are good for about 350CFM each. Doesn't sound like much? Go look up the flow numbers on a UMP, you'll be in for a suppries.......

Also note the trans cooler on top of the radiator.

Image

It makes use of the large mechanical engine fan for cooling. Simple and effective. The engine oil goes through a heat exchanger in the radiator. This means there is nothing blocking airflow to the radiator except the AC condenser. Stacking coolers one in front of the other is never good for effiecincy........
Top
User avatar
ChaseTruck754
Spy/Ninja
Posts: 9194
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks
Location: Huntington Beach, CA

Re: Pic post

Post by ChaseTruck754 »

What is that setup on Brian? Those "nascar style" oil coolers are "cool"!
Owner of only dead and forgotten projects
Top
Dust
Posts: 781
Joined: Fri Mar 12, 2010 1:41 pm
Bronco Info: Go Slow Ford's From 1957 to 1994
Location: Central Oregon

Re: Pic post

Post by Dust »

Donaldson! Ok that makes sense!
The Ump hat I had sticker sort of gave it away.
Been looking for a filter that would flow in the 900CFM @ 2" or less DeltaP, and actually Filter air, unlike the Cool filters.

Thanks!
Top
gr8brnc
Posts: 23
Joined: Tue Feb 16, 2010 11:03 am
Bronco Info: 96 Bronco, 535hp, lots of glass, coil overs coming soon

Re: Pic post

Post by gr8brnc »

tcm glx wrote:Image
Are the crew cab Raptors available already?
Top
User avatar
BDKW1
Posts: 1518
Joined: Mon Jun 14, 2010 1:19 pm
Bronco Info: It's the new and inproved Party Barge!
Location: Not Socal

Re: Pic post

Post by BDKW1 »

ChaseTruck754 wrote:What is that setup on Brian? Those "nascar style" oil coolers are "cool"!
Todds Bronco.http://jdfabrication.com/index.php?opti ... &Itemid=68

It's the one I'm trying to get him to do a Duramax swap on. Then it will be off to the NORRA races LOL......
Top
User avatar
BDKW1
Posts: 1518
Joined: Mon Jun 14, 2010 1:19 pm
Bronco Info: It's the new and inproved Party Barge!
Location: Not Socal

Re: Pic post

Post by BDKW1 »

Dust wrote:Donaldson! Ok that makes sense!
The Ump hat I had sticker sort of gave it away.
Been looking for a filter that would flow in the 900CFM @ 2" or less DeltaP, and actually Filter air, unlike the Cool filters.

Thanks!
Those are 350CFM @ 3" if I remember correctly. 900CFM @ 2" is going to be hard to package. They have a larger model that will flow around 450CFM @ 3" with the saftey filter removed but fitting it in might be a chore. I'm not running the saftey filters on these, they cut down flow too much and aren't really needed on something that gets serviced regulalry.
Top
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:
Contact philofab

Re: Pic post

Post by philofab »

BDKW1 wrote:It's the one I'm trying to get him to do a Duramax swap on. Then it will be off to the NORRA races LOL......

Wouldn't a 4BT Cummins be more suited to that?
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
Top
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:
Contact philofab

Re: Pic post

Post by philofab »

BDKW1 wrote:Those are 350CFM @ 3" if I remember correctly. 900CFM @ 2" is going to be hard to package. They have a larger model that will flow around 450CFM @ 3" with the saftey filter removed but fitting it in might be a chore. I'm not running the saftey filters on these, they cut down flow too much and aren't really needed on something that gets serviced regulalry.

Which style are these and who is good to buy through? I was going to buy a UMP can for the my Bronco and Crew but I like the looks of these better.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
Top
User avatar
BDKW1
Posts: 1518
Joined: Mon Jun 14, 2010 1:19 pm
Bronco Info: It's the new and inproved Party Barge!
Location: Not Socal

Re: Pic post

Post by BDKW1 »

philofab wrote:
BDKW1 wrote:It's the one I'm trying to get him to do a Duramax swap on. Then it will be off to the NORRA races LOL......

Wouldn't a 4BT Cummins be more suited to that?
Boat anchor with terrible powerband when you get the HP up. The D-max with an Allison is a very close fit and the T-case drops on the D-side. I measured one up really well and it looks like it will fit very well.
Top
User avatar
David Kennedy
Posts: 39
Joined: Thu Dec 10, 2009 1:28 pm
Location: Los Angeles
Contact:
Contact David Kennedy

Re: Pic post

Post by David Kennedy »

BDKW1 wrote:
philofab wrote:
BDKW1 wrote:It's the one I'm trying to get him to do a Duramax swap on. Then it will be off to the NORRA races LOL......

Wouldn't a 4BT Cummins be more suited to that?
Boat anchor with terrible powerband when you get the HP up. The D-max with an Allison is a very close fit and the T-case drops on the D-side. I measured one up really well and it looks like it will fit very well.

Please keep me posted on that project.
Top
User avatar
tcm glx
Peanut Butter
Posts: 7308
Joined: Tue Dec 08, 2009 11:19 am
Bronco Info: 93 Ford Bronco 5.8
Location: Riverside Ca
Contact:
Contact tcm glx

Re: Pic post

Post by tcm glx »

97-03 F1
Image

Image

Image

Image
Top
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:
Contact philofab

Re: Pic post

Post by philofab »

How did that get under there?
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
Top
User avatar
Rednek Renegade
Posts: 123
Joined: Sun Dec 13, 2009 2:53 pm
Bronco Info: 1985 Bronco Xlt 5.8L 4V H.O. C6, NP2o8
Location: Rancho Cucamonga, So.Cal
Contact:
Contact Rednek Renegade

Re: Pic post

Post by Rednek Renegade »

Thats sick!!!
Project el cheap-o
Top
User avatar
BRONCONUT
Posts: 87
Joined: Sun Jan 10, 2010 12:25 am
Bronco Info: '95 Eddie Bauer
Location: Hartford KY
Contact:
Contact BRONCONUT

Re: Pic post

Post by BRONCONUT »

This is where I would like to see my bronco in the next few years. GKR has the best rig ever IMHO.
Attachments
wmdscn3712.jpg
wmdscn3712.jpg (56.32 KiB) Viewed 1848 times
Top
User avatar
tcm glx
Peanut Butter
Posts: 7308
Joined: Tue Dec 08, 2009 11:19 am
Bronco Info: 93 Ford Bronco 5.8
Location: Riverside Ca
Contact:
Contact tcm glx

Re: Pic post

Post by tcm glx »

Ok, so I really want a Raptor, but a Stewart Raceworks Raptor would be over the top!!

Image

Image

http://www.youtube.com/watch?v=e94KR97acTQ
Top
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:
Contact philofab

Re: Pic post

Post by philofab »

I don't I could pass that Raptor so easily.

Those are built from regular F150s right?
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
Top
User avatar
tcm glx
Peanut Butter
Posts: 7308
Joined: Tue Dec 08, 2009 11:19 am
Bronco Info: 93 Ford Bronco 5.8
Location: Riverside Ca
Contact:
Contact tcm glx

Re: Pic post

Post by tcm glx »

philofab wrote:I don't I could pass that Raptor so easily.

Those are built from regular F150s right?
Yeah, not much raptor there at all, as a matter a fact, they have pictures of the cab somewhere on RDC.....
Top
User avatar
BRONCONUT
Posts: 87
Joined: Sun Jan 10, 2010 12:25 am
Bronco Info: '95 Eddie Bauer
Location: Hartford KY
Contact:
Contact BRONCONUT

Re: Pic post

Post by BRONCONUT »

I get wood everytime I see one of those, if I were to buy a newer vehicle a raptor would be it.
Top
User avatar
Andy Jones
Posts: 2209
Joined: Tue Dec 08, 2009 2:47 pm
Bronco Info: In the Works!
Location: Canyon Lake,ca
Contact:
Contact Andy Jones

Re: Pic post

Post by Andy Jones »

Had to put this here! my Niece and her friend posing in front of the lost boys racing 9 car!! they love the races!!
Attachments
67190_179266582099821_100000494424600_578948_329843_n.jpg
67190_179266582099821_100000494424600_578948_329843_n.jpg (100.62 KiB) Viewed 1634 times
dont PM me.. I don't get them on Taptalk
Top
Dust
Posts: 781
Joined: Fri Mar 12, 2010 1:41 pm
Bronco Info: Go Slow Ford's From 1957 to 1994
Location: Central Oregon

Re: Pic post

Post by Dust »

Andy Jones wrote:Had to put this here! my Niece and her friend posing in front of the lost boys racing 9 car!! they love the races!!
Best Pix yet!
The next generation.
Top
Post Reply

Return to “Whatever”