Guess my hp/tq its Dyno day!
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Guess my hp/tq its Dyno day!
Current numbers after Edelbrock Performer intake, Performer cylinder heads, headers, a set of Crane Cams 1.7 ratio rocker arms.
166 hp at 3,750 rpm
256 lb-ft at 3,200 rpm
Since that last dyno pull the E303 cam,bassani y pipe and full 3" exhaust has been added,Intake is stock with an AEM dryflow filter.
Im hoping for 230+hp 300+tq after today. My appointment on the dynojet is at 2pm ill post up the results tonight.
Whoevers guess is closest wins 2 petfified cheetos i found in the passenger side map pocket!
GO!
166 hp at 3,750 rpm
256 lb-ft at 3,200 rpm
Since that last dyno pull the E303 cam,bassani y pipe and full 3" exhaust has been added,Intake is stock with an AEM dryflow filter.
Im hoping for 230+hp 300+tq after today. My appointment on the dynojet is at 2pm ill post up the results tonight.
Whoevers guess is closest wins 2 petfified cheetos i found in the passenger side map pocket!
GO!
- tcm glx
- Peanut Butter
- Posts: 7308
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: Guess my hp/tq its Dyno day!
179 hp
291 torque
291 torque
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: Guess my hp/tq its Dyno day!
207 hp
311 torque
311 torque
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: Guess my hp/tq its Dyno day!
187 hp
298 torque
298 torque
- Agui-E7TE
- Posts: 1483
- Joined: Sat Jul 30, 2011 2:50 am
- Bronco Info: 89 Bronco w/ 6 in. skyjacker kit w/ dual Bilstein 5150 shocks up front and Deaver F53's in the rear
Re: Guess my hp/tq its Dyno day!
175HP
275 Torque
On Nitrous.. (50 shot)
210HP
320 Torque
275 Torque
On Nitrous.. (50 shot)
210HP
320 Torque
- Silverslk
- Posts: 1932
- Joined: Tue Dec 08, 2009 12:13 pm
- Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
- Location: Garden Grove, CA
- Contact:
Re: Guess my hp/tq its Dyno day!
Bad idea Ryan... Dyno pulls are always heart breakers.... You never get what you're hoping for. I've dyno'd my gti, Benz, gsxr750, zx9 and waiting to dyno zx10 after the valve adjust/service. I think you're hope is high for just a cam and exhaust addition. Hope I'm wrong.
I'm guessing between Steve and Tony...... Maybe
183hp
275tq
I'm guessing between Steve and Tony...... Maybe
183hp
275tq
- guard
- Posts: 424
- Joined: Tue Oct 18, 2011 7:51 pm
- Bronco Info: 1996 Ford Bronco 5.8
- Location: Loma Linda, CA
- Contact:
Re: Guess my hp/tq its Dyno day!
195 hp
285 lb-ft
285 lb-ft
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: Guess my hp/tq its Dyno day!
Oh i know its wishfull thinking. Ill be happy for it to finally be tuned...
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: Guess my hp/tq its Dyno day!
My thought is the cam can really bring the previous enhancements some life. Valves have to be open to flow. Still pulling for the bigger numbers Ryan.
- ESHALLBETTER
- Posts: 1580
- Joined: Fri Dec 11, 2009 8:49 am
- Bronco Info: 85 class 3, 70's somthing trail bronco.
- Location: Minneapolis, MN
Re: Guess my hp/tq its Dyno day!
Put on stock tires, it'll add horsepower.
-
- Posts: 1255
- Joined: Mon Nov 29, 2010 10:44 pm
- Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
- Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي
Re: Guess my hp/tq its Dyno day!
192hp
269 ft lbs tQ
269 ft lbs tQ
- Silverslk
- Posts: 1932
- Joined: Tue Dec 08, 2009 12:13 pm
- Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
- Location: Garden Grove, CA
- Contact:
Re: Guess my hp/tq its Dyno day!
Hell yeahESHALLBETTER wrote:Put on stock tires, it'll add horsepower.
- Silverslk
- Posts: 1932
- Joined: Tue Dec 08, 2009 12:13 pm
- Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
- Location: Garden Grove, CA
- Contact:
Re: Guess my hp/tq its Dyno day!
I figured as much Brian. I was thinking same but tried to account for loss of torque with 3" exhaust and added hp. My thoughts are the 303 will add more hp than torque with his current setup.yikes wrote:My thought is the cam can really bring the previous enhancements some life. Valves have to be open to flow. Still pulling for the bigger numbers Ryan.
-
- Posts: 292
- Joined: Wed Aug 11, 2010 7:25 pm
- Bronco Info: 1991 351. lightweight special
Re: Guess my hp/tq its Dyno day!
201 hp
310 tq
Best of luck!
310 tq
Best of luck!
- BDKW1
- Posts: 1517
- Joined: Mon Jun 14, 2010 1:19 pm
- Bronco Info: It's the new and inproved Party Barge!
- Location: Not Socal
Re: Guess my hp/tq its Dyno day!
Single 3" exhuast does not flow enough to reduce torque.Silverslk wrote:I was thinking same but tried to account for loss of torque with 3" exhaust and added hp.
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: Guess my hp/tq its Dyno day!
Here we go!
- Attachments
-
- uploadfromtaptalk1391287223432.jpg (47.41 KiB) Viewed 2156 times
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: Guess my hp/tq its Dyno day!
Drum roll please!!!
Re: Guess my hp/tq its Dyno day!
My GT40 302 put down 220hp 232ft/lbs torque with a holly 750 4 barrel carb....
I personally think once you put some 24# injectors in it and tune it you will easily see 220-230hp or maybe more.... I think its gonna starve gor fuel with the stock injectors
I personally think once you put some 24# injectors in it and tune it you will easily see 220-230hp or maybe more.... I think its gonna starve gor fuel with the stock injectors
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: Guess my hp/tq its Dyno day!
First pull pre tune and no clear winners from previous guesses...
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: Guess my hp/tq its Dyno day!
AFR was tits all the way to redline with stock injectors.