92 XLT BUILD

THEJESUS · Post by **THEJESUS** » Fri Dec 16, 2016 12:49 pm

Gotcha! I thought that's what you were talking about I just wanted to make sure. Ugh this is why you don't buy cars from Mexico haha jk I don't regret it just a pain at times.

How far from Murrieta are you?

Sent from my iPhone using Tapatalk

Tchajagos · Post by **Tchajagos** » Fri Dec 16, 2016 2:40 pm

These are the stock ones. One set has the built in sway bar bracket and the other is a 2 piece design with the swaybar bracket separate from the coil retainer. I have both designs and either will work. Let me know.

THEJESUS · Post by **THEJESUS** » Fri Dec 16, 2016 3:07 pm

Awesome! If possible I would like the ones with out bracket since I'm not running the sway bar anymore anyway.
Are you far from Murrieta?

Sent from my iPhone using Tapatalk

Tchajagos · Post by **Tchajagos** » Fri Dec 16, 2016 11:08 pm

Sent you a message through tapatalk

THEJESUS · Post by **THEJESUS** » Wed Dec 21, 2016 6:45 pm

finally got to wear my new GFB shirt and gunna take the bronco out for a drive it's been awhile!

Sent from my iPhone using Tapatalk

LvSteve · Post by **LvSteve** » Wed Dec 21, 2016 8:59 pm

Are the tee shit available again ?

THEJESUS · Post by **THEJESUS** » Thu Dec 22, 2016 7:33 am

Tcinu2 I believe it's Ollie that deals with it and he had about 2 or three left.
Might want to PM him and see what he has available.

Sent from my iPhone using Tapatalk

THEJESUS · Post by **THEJESUS** » Mon Dec 26, 2016 6:16 pm

Well here is difference between the stock spring retainer and the Mickey Mouse one they did in Mexico haha. On top of that here is the sketchy extended bolt they added on to it to make it all work... hahaha

Sent from my iPhone using Tapatalk

THEJESUS · Post by **THEJESUS** » Tue Dec 27, 2016 10:35 pm

Thanks to Travis for getting me the new bolts and spring retainers! Finally all done now time for an alignment

Sent from my iPhone using Tapatalk

Tchajagos · Post by **Tchajagos** » Tue Dec 27, 2016 11:06 pm

Glad to help

does it look like the camber is better now?

THEJESUS · Post by **THEJESUS** » Wed Dec 28, 2016 7:48 am

Travis it does have less camber but it's still there. I'm hoping once I get the alignment they will be able to actually get it dialed in this time.

Sent from my iPhone using Tapatalk

THEJESUS · Post by **THEJESUS** » Mon Jan 02, 2017 5:35 pm

Everything is sitting nice now! After all the work it was worth it even had to save my buddy in his FJ. Was a pretty muddy situation and got stuck in a rut but no worries the bronco was there to save him

Sent from my iPhone using Tapatalk

Tchajagos · Post by **Tchajagos** » Mon Jan 02, 2017 6:12 pm

Sweet. Glad we could help out.

THEJESUS · Post by **THEJESUS** » Fri Dec 01, 2017 2:16 pm

Its been awhile since i've actually done anything to the bronco. I finally had some time these past couple of weeks to get some work done

I made a box for bed area of the bronco..
also my dome lights werent working so I decided to get a rock light and wire it to a switch to have some interior lighting. It was a great idea because it is super bright!

Needles929 · Post by **Needles929** » Fri Dec 01, 2017 3:28 pm

I really like that cargo box. Nice job

THEJESUS · Post by **THEJESUS** » Fri Dec 01, 2017 4:04 pm

Thanks! next is getting gas charged shocks to lift it up and setting up a little LED light for night. it works great with the seats folded down the box can support my weight no problem so I can lay an air mattress down and camp in the bronco

Needles929 · Post by **Needles929** » Fri Dec 01, 2017 4:12 pm

THEJESUS wrote:Thanks! next is getting gas charged shocks to lift it up and setting up a little LED light for night. it works great with the seats folded down the box can support my weight no problem so I can lay an air mattress down and camp in the bronco

Post some more pics up when finished!! Please

THEJESUS · Post by **THEJESUS** » Sat Dec 23, 2017 1:19 pm

Finally got to take the bronco out to go camping. my fiance and I headed out to joshua tree we used the inside of our bean bag which lays out to a twin size bed for our mattress... making he box the same height as the seats folded down was perfect! we slept perfect! Here are a few pics of how our setup was

THEJESUS · Post by **THEJESUS** » Tue May 28, 2024 11:02 am

After many years of dreaming of doing this I finally had the opportunity to get the Bronco all done.

I was able to send it over to Desolate Motorsports to have them knock it all out. Well worth the money, I wish I had the time to do it all myself but I just don't have that kind of time on my hands.

What I had done.

Stage 3 stock width C&T beams
shock tower with billet
sway bars
cross member brace
sport cage
rear shocks with deavers
8.8 Truss
tank over
billet radius arms
a few other misc things were done.

Things I did
suede head liner (jrs custom upholstery)
KC cyclone interior light and under hood light, I did myself
Baja Design front light bar

THEJESUS · Post by **THEJESUS** » Tue May 28, 2024 11:04 am

92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

Re: 92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

92 XLT BUILD

Re: 92 XLT BUILD

Re: 92 XLT BUILD

Re: 92 XLT BUILD

Re: 92 XLT BUILD

Re: 92 XLT BUILD

Re: 92 XLT BUILD

Re: 92 XLT BUILD