Brian's '96
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: Brian's '96
Here's another.
-
- Posts: 647
- Joined: Tue Jan 26, 2010 4:44 pm
- Bronco Info: 1979 Class 3 Race Bronco. Built in 2000.
Re: Brian's '96
That might not be a large enough steering cooler. We finally had to go with a medium sized trans cooler.
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Brian's '96
I would also be game to buy
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: Brian's '96
Got to put on a few dirt miles this weekend. Had a great time. Need more! The go fast was cut short by a miss that started on the way out there. It got worse as the day went on. Haven't got it figured out just yet. Coincidentally, the #3 primary tube blew out and had a terrible leak. I thought that was the problem, but no change after clearing codes and welding it up. The only code it's displaying is P1101, which is MAF sensor. May need to replace it, but not certain.
Thanks to tcmglx for this shot in a fun whoop section...
Thanks to tcmglx for this shot in a fun whoop section...
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: Brian's '96
Dual spares time!
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: Brian's '96
Yikes,
Not sure if you ever picked up the Lowrance HDS7m but can you tell me why you wanted that model? I have a chance to pick one up but I know nothing about gps systems.
Not sure if you ever picked up the Lowrance HDS7m but can you tell me why you wanted that model? I have a chance to pick one up but I know nothing about gps systems.
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: Brian's '96
I ended up with an HDS8. Couldn't pass up the deal. Seven was a price point thing. Screen size is way more than an inch different between the 7 and 8.dtbback wrote:Yikes,
Not sure if you ever picked up the Lowrance HDS7m but can you tell me why you wanted that model? I have a chance to pick one up but I know nothing about gps systems.
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: Brian's '96
After a couple years of beatings the CV let loose in the rear shaft. Really pleased with the overall reliability I've been getting out of it though. Once I got it strapped up another inch, no more u-joint failures. Woohooo! That being said, just replaced the driveshaft with a unit from CJ Tatton. Great shaft for the money. $260 shipped!! Second time I've used him and will be my go to from here on out. Ordered up a new cv ball and will rebuild the old shaft for another spare.
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Brian's '96
Are you using the stock size CV?
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: Brian's '96
Yeah. Just a 1330.funinthesun95 wrote:Are you using the stock size CV?
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
- tcm glx
- Peanut Butter
- Posts: 7308
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: Brian's '96
Bad azzzzzz. So much fun!
- BDKW1
- Posts: 1517
- Joined: Mon Jun 14, 2010 1:19 pm
- Bronco Info: It's the new and inproved Party Barge!
- Location: Not Socal
Re: Brian's '96
Good thing your in a Bronco, your choice of lines sucks LOL.......
- Phoenix0783
- Posts: 658
- Joined: Thu Dec 10, 2009 12:50 pm
- Bronco Info: No more Bronco :(
- Location: Bend, OR
- Contact:
Re: Brian's '96
I think you can get a couple more degrees with 1350s. At least that's what I recall when I last looked into it.yikes wrote:Yeah. Just a 1330.funinthesun95 wrote:Are you using the stock size CV?
My car is a hybrid; it burns gas and rubber.
-
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
Brian's '96
Some of the best bronco pics I've seen! Love it!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- tcm glx
- Peanut Butter
- Posts: 7308
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: Brian's '96
Post the video B!