I got my bronco during the end of my junior year of high school and it got me all the way through college. I got it with the expectation that it would be a learning process as I would be doing all the work myself. It is my daily driver and I have really never had any major issues with it. Originally I was into having a trail worthy vehicle so I put a 6 inch Superlift with extended radius arms and a sky shackle flip on it. It remained unchanged until this last summer (2010) when I really decided that having a GoFast bronco is what I really want(ed) so I decided to treat myself to some Deavers. That is pretty much the story so far, eventually the plan will be coilovers, C&T beams, and all that jazz. I'll let the pictures say the rest:
Specs:
1994 Bronco XLT 5.8
6 inch Superlift front
Deaver J40s rear
extended brake lines front and rear
35X12.50X15 BFG M/Ts
15X10 Steel ProComp wheels
3.55 stock gears
herculined/sound deadening
napa ball joints
timken wheel bearings and seals
The day I brought it home, it had been in a collision hence the wood front bumper...
![Image](http://www.supermotors.net/getfile/228437/fullsize/dsc000921.jpg)
Very first project was Herculining the interior...
![Image](http://www.supermotors.net/getfile/235808/fullsize/bb-005.jpg)
Didn't stay stock for long, 6 inch Superlift...
![Image](http://www.supermotors.net/getfile/296022/fullsize/dsc003091.jpg)
![Image](http://www.supermotors.net/getfile/312431/fullsize/brad-flexin-by-amtrak-001.jpg)
Shackle flip, terrible ride because I was young(er) and dumb(er) and never set the shackle or pinion angle properly...
![Image](http://www.supermotors.net/getfile/296024/fullsize/dsc003121.jpg)
Wheeled with it like that for awhile....
![Image](http://www.supermotors.net/getfile/510495/fullsize/_dsc0033.jpg)
Got tired of not having carpet and of the noise, so I threw some peel'n'seal and carpet back in...
![Image](http://www.supermotors.net/getfile/817822/fullsize/0707091645a.jpg)
![Image](http://www.supermotors.net/getfile/817827/fullsize/0707091208.jpg)
![Image](http://www.supermotors.net/getfile/817816/fullsize/0715091416.jpg)
![Image](http://www.supermotors.net/getfile/817814/fullsize/0715091420.jpg)
about 5-6 years later the only changes have been the deavers and stock shackles, a properly set pinion angle, and the correct bumper...
![Image](http://www.supermotors.net/getfile/808432/fullsize/p6220042.jpg)
looks like most of the pictures of this install are still on my camera, but unfortunately I lost the cord to get them on my computer, so here is a picture from my phone...
![Image](http://i1213.photobucket.com/albums/cc461/BradEMerchant/Mobile%20Uploads/2011-04-19_16-52-31_627.jpg)
And as it currently sits (I had the hood popped opened)...
![Image](http://i1213.photobucket.com/albums/cc461/BradEMerchant/Mobile%20Uploads/2011-04-19_16-52-11_281.jpg)
Well thanks for taking the time to check out my build thread, it's really more of a place for me to keep a time line of everything I've done so far than a real build thread haha.
Long live the 92-96 front end!!!