Title says it all, Fabricated shackles for 2.50" wide springs, maybe a little longer than 6" CtC, w/ steel spacers for 3.00" frame hangers, look to me like mfg'd parts - not home built. Caused springs to rub my stock body. Located 93004 I'll give them a month and then recycle them. PM works, but user name at yahoo dot com works better.
Fabricated shackles ~6" X 2.50 w/ spacers
- ntsqd
- Posts: 336
- Joined: Fri Dec 11, 2009 8:49 pm
- Bronco Info: '70 Early Bronco SuperCab Shortbed Pick-up "Bronc-up" aka "Frank(entruck)", '96 OJB "Blanc-Oh!"
- Location: upper SoCA
Fabricated shackles ~6" X 2.50 w/ spacers
Cross-threaded is tighter than Lock-Tite.
- AussieRod
- Posts: 2804
- Joined: Sun Sep 05, 2010 1:43 am
- Bronco Info: 81 Bronco XLT, 250 alloy head crossflow 6, NP435/NP208, 4:10 gears, 31-10.5R15 M/Ts.
- Location: Downunder
Re: Fabricated shackles ~6" X 2.50 w/ spacers
Selling or are you looking for replacements? 2.5" spring to a 3" hanger, correct?
- ntsqd
- Posts: 336
- Joined: Fri Dec 11, 2009 8:49 pm
- Bronco Info: '70 Early Bronco SuperCab Shortbed Pick-up "Bronc-up" aka "Frank(entruck)", '96 OJB "Blanc-Oh!"
- Location: upper SoCA
Re: Fabricated shackles ~6" X 2.50 w/ spacers
Free to a good home.
Correct, 2.50 spring to 3.00 hanger or delete the spacers & go 2.50 spring to 2.50 hanger (do those exist?).
Bought & installed some Autofab shackles already.
Correct, 2.50 spring to 3.00 hanger or delete the spacers & go 2.50 spring to 2.50 hanger (do those exist?).
Bought & installed some Autofab shackles already.
Cross-threaded is tighter than Lock-Tite.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: Fabricated shackles ~6" X 2.50 w/ spacers
Yes those exist = 2wd F series, range, etc.ntsqd wrote:...or delete the spacers & go 2.50 spring to 2.50 hanger (do those exist?).
Rod - if you are wanting these I can work out getting them shipped to me then off to you.
Owner of only dead and forgotten projects
- ntsqd
- Posts: 336
- Joined: Fri Dec 11, 2009 8:49 pm
- Bronco Info: '70 Early Bronco SuperCab Shortbed Pick-up "Bronc-up" aka "Frank(entruck)", '96 OJB "Blanc-Oh!"
- Location: upper SoCA
Re: Fabricated shackles ~6" X 2.50 w/ spacers
These are spoken for.
Cross-threaded is tighter than Lock-Tite.