Kritter's 96 Bronco

shockseals.com · Post by **shockseals.com** » Wed Jan 21, 2015 12:12 pm

80 series land cruiser. Its a centrifugal filter housing with a silt canister on the bottom that is removable to dump silt out. I have the adapter plate drawn up if you want the dxf file.

philofab · Post by **philofab** » Wed Jan 21, 2015 12:17 pm

shockseals.com wrote:80 series land cruiser. Its a centrifugal filter housing with a silt canister on the bottom that is removable to dump silt out. I have the adapter plate drawn up if you want the dxf file.

I appreciate it but I don't run a MAF so the adapter plate would not work for me.

ChaseTruck754 · Post by **ChaseTruck754** » Wed Jan 21, 2015 1:08 pm

That air cleaner is pretty cool.

What are rough dimensions of the box, & how big is the air tube where it attaches? Looking at pics I'd guess about 3"???

I'm getting to the point where I want to figure something out for my crew & if I can grab one of these vs. fab something I might.

shockseals.com · Post by **shockseals.com** » Wed Jan 21, 2015 1:48 pm

ChaseTruck754 wrote:That air cleaner is pretty cool.

What are rough dimensions of the box, & how big is the air tube where it attaches? Looking at pics I'd guess about 3"???

I'm getting to the point where I want to figure something out for my crew & if I can grab one of these vs. fab something I might.

The tube to adapt to is pretty damn close to the stock bronco diameter...within an 1/8". I don't have the thing here to measure OA dimensions of the box. The land cruiser filter per wix is good to 560cfm vs the stock bronco filter wix claims at 320cfm which is good to know.

ChaseTruck754 · Post by **ChaseTruck754** » Wed Jan 21, 2015 3:36 pm

Thanks for the info. I've looked a bit online to try & find sizes etc. but haven't found much yet.

It would be going in front of an inline 6 turbo diesel. That can is just similar to what I was contemplating making.

I guess I'll look up what the cfm is for the cummins stock filters & see if this thing is anywhere close.

cs_drums · Post by **cs_drums** » Wed Jan 21, 2015 7:20 pm

I think you just made ump loose some money. I'm gonna go this route fo sho

motoxscott · Post by **motoxscott** » Wed Jan 21, 2015 10:32 pm

Looking good .... one of these days I'll get out there and join you haha

- Scott

Post by **SteveG** » Wed Jan 21, 2015 10:43 pm

Just when I thought I couldn't like this truck any more....

shockseals.com · Post by **shockseals.com** » Fri Apr 17, 2015 8:52 am

Nothing too exciting but I got the KC cyclones mounted using the OEM power with a switch and washer bottle/pump mounted between air cleaner and fuse panel. The hood light off the factory power is nice since it will time out if left on too long. Now I just need to run the water lines for the squirters and its ready to rip...other than a timing cover coolant leak.

tcm glx · Post by **tcm glx** » Fri Apr 17, 2015 8:57 am

Those are bright!! Lookin good

tcm glx · Post by **tcm glx** » Fri Apr 17, 2015 9:13 am

How'd you mount them? Self tapping screws?

shockseals.com · Post by **shockseals.com** » Fri Apr 17, 2015 9:24 am

Dorman 5/16 screw in plastic rivets. They rotate a bit but they are tight to the glass and I tugged on them pretty good and they wouldn't come out. 8 days in Baja will be the decider if they are strong enough!

dtbback · Post by **dtbback** » Wed Jun 17, 2015 9:04 pm

We're you ever able to pull rough dimensions on the land cruiser air box?

shockseals.com · Post by **shockseals.com** » Thu Oct 01, 2015 9:05 pm

Got it all painted and lowered it a little. Just need to do the steering column bearing rebuild and get Tony's projector hid lights installed. Baja bound soon.

tcm glx · Post by **tcm glx** » Thu Oct 01, 2015 9:07 pm

Those fenders!!! Looking good Kris

shockseals.com · Post by **shockseals.com** » Fri Oct 02, 2015 8:14 am

that's lame it loaded the pic sideways from my iphone...

moderators can you fix that?

Post by **SteveG** » Sat Oct 03, 2015 4:00 am

That's odd. It's right side up for me.

Seabass · Post by **Seabass** » Sat Oct 03, 2015 3:41 pm

Sideways for me on my phone and computer.

cs_drums · Post by **cs_drums** » Sat Oct 03, 2015 4:30 pm

It's right side up in my phone. Looks good total sleeper

shockseals.com · Post by **shockseals.com** » Mon Oct 19, 2015 9:23 pm

I got a pair of Tony's retrofit lights and a fresh set of BFG shoes...almost ready for Baja this weekend.

Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Re: Kritter's 96 Bronco

Kritter's 96 Bronco

Re: Kritter's 96 Bronco