Random updates... what are you working on?

Wrightracing.net · Post by **Wrightracing.net** » Sat Oct 11, 2014 12:49 am

Rmc wrote:...

What size of uni ball? I have a 7/8" ones on my beams. Glen from Complete Fabrication pointed me in that direction on the size to leave a little more meat on the beam for strength to TIG weld the cups in place.

Rmc · Post by **Rmc** » Sat Oct 11, 2014 6:48 am

Travisfab · Post by **Travisfab** » Sun Oct 12, 2014 2:47 pm

Just about done with my BMW project. Just needs a few final finishing touches

Wrightracing.net · Post by **Wrightracing.net** » Sun Oct 12, 2014 3:21 pm

So when do the 39's go on?

BDKW1 · Post by **BDKW1** » Tue Oct 14, 2014 11:42 am

Rmc wrote:Here's a new machine I'm putting together today. It's got 3 24 station turrets and x,y,&z on all 3 turrets. It's 16 axis total with a robotic arm parts catcher and part conveyor.

Live tooling?

Man, I could crash the shit out of that thing.................

Rmc · Post by **Rmc** » Tue Oct 14, 2014 12:50 pm

I believe you Brian, and that is what keeps guys like me in a job. When they crash it takes hours sometimes days to get them back to correct geometry.

robertcrav · Post by **robertcrav** » Fri Oct 24, 2014 2:21 am

Well...pad disintegrated on the way home yesterday, took the passenger rotor with it ... so late night brakes to get to work...

I will have to resize images in the morning. Pretty much went smooth except for the drivers side axle snap ring. I couldn't get the inner hub in deep enough or the axle pulled out enough to get the snap ring on. The outer hub lock ring went in easy.

I replaced the hubs/rotors, wheel bearings, seals, and pads

Post by **SteveG** » Fri Oct 24, 2014 10:03 am

Bummer! Did the pad come apart or was it just worn out?

robertcrav · Post by **robertcrav** » Fri Oct 24, 2014 10:38 am

SteveG wrote:Bummer! Did the pad come apart or was it just worn out?

It was worn pretty low and then came apart...

still have to dig into why I can't get the axle retaining clip on... I don't see the groove

Took the hub assembly off 4 times last night, checked the bearings, inner bearing seal to see if something was hanging up... but still nadda. I was able to get the hub c-clip in, bolted on the hub and drove to work...gotta make the $$

hobbyturnedobsession · Fri Oct 24, 2014 12:09 pm

Reach around and push the stub axle. Sometimes it'll slide back and you won't be able to get the clip on.

philofab · Post by **philofab** » Fri Oct 24, 2014 1:11 pm

: ImageUploadedByTapatalk1414181410.944698.jpg (192.14 KiB) Viewed 1208 times

Mounting lights on the Dodge for the 1000. Still have to put the fog lights in, plastidip the bumper, and remove the broken valance.

Post by **SteveG** » Fri Oct 24, 2014 1:27 pm

Sweet!

What's your experience with the plastidip?

Rmc · Post by **Rmc** » Fri Oct 24, 2014 1:31 pm

Looks great!

philofab · Post by **philofab** » Fri Oct 24, 2014 2:15 pm

SteveG wrote:What's your experience with the plastidip?

I did the wheels on my Infiniti and some other stuff with it. Works well, easy to remove, easy to re spray. Cheap. The only down fall is it doesn't handle tree branches very well, but the cost of repair is soo cheap it offsets it. I will eventually have the front bumper powdercoated if I don't build a valance style replacement. I need to take a hole saw to the bumper and make some cooling holes. The light bar completely fills the factory cooling holes.

philofab · Post by **philofab** » Sat Oct 25, 2014 5:48 pm

: ImageUploadedByTapatalk1414284467.219159.jpg (259.47 KiB) Viewed 1126 times

Plastidip yo!

Wrightracing.net · Post by **Wrightracing.net** » Sat Oct 25, 2014 8:25 pm

I like that. Philofab, is that just a riddle can application or with a spray gun?
When I paint my Bronco I plan to do the hood black, the shell black and the lower 6" of the side body- doors black with the rest of it white.

philofab · Post by **philofab** » Sun Oct 26, 2014 6:06 am

Just a rattle can. Takes longer from all the thin coats.

funinthesun95 · Post by **funinthesun95** » Mon Oct 27, 2014 9:59 am

Back yard needed some Love for the 2 year old..... had some used Hardwood flooring I pulled up from a house I had.....It made a great play house. ....I am so Green friendly ahah

She has parking for at least 8 friends.

Swing set up next...... and paint back retaining walls

Then Back to the Bronco

ChaseTruck754 · Post by **ChaseTruck754** » Mon Oct 27, 2014 1:32 pm

Lookin good Willie! I'm sure she loves it!

Funny how house stuff seems to take so long so I can never get back to the truck.

I'm on wine rack duty over here

Bondobob · Post by **Bondobob** » Mon Oct 27, 2014 5:28 pm

: ImageUploadedByTapatalk1414456044.776951.jpg (282.92 KiB) Viewed 1057 times

Steve G and I did a GORUCK Challenge Friday night... Wow what an experience of Spec Ops team building for 12 hours and almost 20 miles

: ImageUploadedByTapatalk1414456026.918212.jpg (266.39 KiB) Viewed 1057 times

: ImageUploadedByTapatalk1414455677.193348.jpg (161.78 KiB) Viewed 1057 times

Think we both were in touch with our Spirit Animals.......

Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?

Re: Random updates... what are you working on?