Page 1 of 5
Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 7:41 am
by RyanDS650X
Current numbers after Edelbrock Performer intake, Performer cylinder heads, headers, a set of Crane Cams 1.7 ratio rocker arms.
166 hp at 3,750 rpm
256 lb-ft at 3,200 rpm
Since that last dyno pull the E303 cam,bassani y pipe and full 3" exhaust has been added,Intake is stock with an AEM dryflow filter.
Im hoping for 230+hp 300+tq after today. My appointment on the dynojet is at 2pm ill post up the results tonight.
Whoevers guess is closest wins 2 petfified cheetos i found in the passenger side map pocket!
GO!
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 7:48 am
by tcm glx
179 hp
291 torque
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 8:09 am
by yikes
207 hp
311 torque
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 8:18 am
by ChaseTruck754
187 hp
298 torque
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 8:59 am
by Agui-E7TE
175HP
275 Torque
On Nitrous.. (50 shot)
210HP
320 Torque
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 10:42 am
by Silverslk
Bad idea Ryan... Dyno pulls are always heart breakers.... You never get what you're hoping for. I've dyno'd my gti, Benz, gsxr750, zx9 and waiting to dyno zx10 after the valve adjust/service. I think you're hope is high for just a cam and exhaust addition. Hope I'm wrong.
I'm guessing between Steve and Tony...... Maybe
183hp
275tq
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 10:45 am
by guard
195 hp
285 lb-ft
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 11:09 am
by RyanDS650X
Oh i know its wishfull thinking. Ill be happy for it to finally be tuned...
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 11:26 am
by yikes
My thought is the cam can really bring the previous enhancements some life. Valves have to be open to flow. Still pulling for the bigger numbers Ryan.
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 11:33 am
by ESHALLBETTER
Put on stock tires, it'll add horsepower.
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 11:37 am
by D1cker1
192hp
269 ft lbs tQ
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 11:43 am
by Silverslk
ESHALLBETTER wrote:Put on stock tires, it'll add horsepower.
Hell yeah
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 11:45 am
by Silverslk
yikes wrote:My thought is the cam can really bring the previous enhancements some life. Valves have to be open to flow. Still pulling for the bigger numbers Ryan.
I figured as much Brian. I was thinking same but tried to account for loss of torque with 3" exhaust and added hp. My thoughts are the 303 will add more hp than torque with his current setup.
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 12:01 pm
by Smart Alex
201 hp
310 tq
Best of luck!
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 1:21 pm
by BDKW1
Silverslk wrote:I was thinking same but tried to account for loss of torque with 3" exhaust and added hp.
Single 3" exhuast does not flow enough to reduce torque.
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 1:40 pm
by RyanDS650X
Here we go!
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 2:01 pm
by yikes
Drum roll please!!!
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 2:04 pm
by tvoymang
My GT40 302 put down 220hp 232ft/lbs torque with a holly 750 4 barrel carb....
I personally think once you put some 24# injectors in it and tune it you will easily see 220-230hp or maybe more.... I think its gonna starve gor fuel with the stock injectors
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 2:31 pm
by RyanDS650X
First pull pre tune and no clear winners from previous guesses...
Re: Guess my hp/tq its Dyno day!
Posted: Sat Feb 01, 2014 2:42 pm
by RyanDS650X
AFR was tits all the way to redline with stock injectors.