Thanks B - looking now.
*edit*
Looked & no luck. It appears people don't make a 7/16" button head allen - especially a fine thread one. They make them in 10mm dia, but the length always stops at 60mm - I need 145mm or so.
Looks like I might be running a standard hex head here.
Hard to find hardware - got a good source?
-
ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: Hard to find hardware - got a good source?
Owner of only dead and forgotten projects
-
BDKW1
- Posts: 1519
- Joined: Mon Jun 14, 2010 1:19 pm
- Bronco Info: It's the new and inproved Party Barge!
- Location: Not Socal
Re: Hard to find hardware - got a good source?
You have a TIG welder right? Just stick some together. It's not like it needs to be super strong, Alfa bumpers are just for looks anyways........
-
ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: Hard to find hardware - got a good source?
Hahahaha - nice... But actually a semi valid point, and something I may end up doing!
I've gone back & forth on running bumpers as the car is just so sexy without them. With today's day & age & complete lack of driving skill by 90% of the people out there I want to run them to protect the precious body
I've gone back & forth on running bumpers as the car is just so sexy without them. With today's day & age & complete lack of driving skill by 90% of the people out there I want to run them to protect the precious body
Owner of only dead and forgotten projects