Page 1 of 10
96 Bronco - Project "Cheryl"
Posted: Sun Oct 27, 2013 5:46 pm
by VintageIronFab
Hello All,
Here is my new 96 Bronco XLT-- equipped with a 5.8, auto, 175k, stock everything and added some 35" used tires from a friend as the ones it came with were total junk. Runs really nice, with the typical broken plastic pieces here and there. My background with the Bronco is really in the 66-77 variety and if you want anything very cool you have to fab it yourself or know that nothing ever fits well. I've already said how great it is to be able to get literally anything for it still locally via the dealer or salvage yard (where there are zillions of these around). Yikes has a build on here that is pretty inspiring and I actually have a decent amount of the higher end parts sitting on the shelf to use if I want. This eventually is going to be pretty fun
Nice to meet you all,
Matt
Re: 96 Bronco - Project "Cheryl"
Posted: Sun Oct 27, 2013 5:56 pm
by Nick
Great starting point, Matt!
Re: 96 Bronco - Project "Cheryl"
Posted: Sun Oct 27, 2013 6:26 pm
by Wrightracing.net
Clean looking Bronco, Great foundation for a sweet ride.

Re: 96 Bronco - Project "Cheryl"
Posted: Sun Oct 27, 2013 6:53 pm
by crisis88
Very nice. Loving the color.
Re: 96 Bronco - Project "Cheryl"
Posted: Sun Oct 27, 2013 7:22 pm
by robertcrav
Welcome! Love the two tone!
Re: 96 Bronco - Project "Cheryl"
Posted: Sun Oct 27, 2013 9:39 pm
by Rmc
Welcome and I like all the others love the paint job lol hope you enjoy the site.
Re: 96 Bronco - Project "Cheryl"
Posted: Sun Oct 27, 2013 11:36 pm
by VintageIronFab
following the Yikes build is just no good for me

I love the speeds these trucks can run and all the luxuries like a/c, sealed interior and a decent stereo are something that my beloved 66-77 Bronco
Re: 96 Bronco - Project "Cheryl"
Posted: Mon Oct 28, 2013 12:41 am
by Rmc
Piece by piece it comes in time.
Re: 96 Bronco - Project "Cheryl"
Posted: Mon Oct 28, 2013 8:43 am
by Bobby Velazquez
Welcome !!
First Project-
Posted: Fri Nov 01, 2013 3:14 pm
by VintageIronFab
This is my first ever FSB repair-- whoohoo -- fixed the radius arm bushings and put on a pair of brake pads. Got part of the front outside and bottom of the frame wire wheeled clean, sandblasted the radius arm brackets and gave the hub/rotor a wire wheeling and some paint. Drives a whole lot better-- I even put on some full race open ended lug nuts

I'M COMING FOR YOU YIKES-- YEA I'M COMING FOR YOU MAN!!!!! J/k-- everyone needs inspiration!
Re: 96 Bronco - Project "Cheryl"
Posted: Fri Nov 01, 2013 3:15 pm
by VintageIronFab
...........
Sandblasted Beams
Posted: Wed Jan 08, 2014 8:53 pm
by VintageIronFab
Sandblasted beams ready for molesting
List of parts ready to go on:
-new uncracked windshield
-Bosch wipers -- these really are nice!
-washer/ overflow tank
-reman steering box
- saginaw p/s pump conversion
-3G alternator
-Optima yellow top w/ 2 ga cables
-new chrome grill to replace the peeling one
That's all for now !!
Re: 96 Bronco - Project "Cheryl"
Posted: Wed Jan 08, 2014 8:57 pm
by ChaseTruck754
Looking good!
Cleaned up nicely.
Re: Sandblasted Beams
Posted: Wed Jan 08, 2014 9:26 pm
by tcm glx
VintageIronFab wrote:Sandblasted beams ready for molesting
List of parts ready to go on:
-new uncracked windshield
-Bosch wipers -- these really are nice!
-washer/ overflow tank
-reman steering box
- saginaw p/s pump conversion
-3G alternator
-Optima yellow top w/ 2 ga cables
-new chrome grill to replace the peeling one
That's all for now !!
Getting stuff done!!
Re: 96 Bronco - Project "Cheryl"
Posted: Wed Jan 08, 2014 10:09 pm
by VintageIronFab
Sandblaasted front end goodness

Scored the 97 F250 grill take off from CL for a meager $30 and its an OE part --whoohoo!!!
Re: 96 Bronco - Project "Cheryl"
Posted: Wed Jan 08, 2014 10:14 pm
by ChaseTruck754
is that grill somehow different from the 92-96 bronco/f-150 ones?
either way - it l;looks clean
Re: 96 Bronco - Project "Cheryl"
Posted: Wed Jan 08, 2014 10:18 pm
by hobbyturnedobsession
Nope no difference.
Re: 96 Bronco - Project "Cheryl"
Posted: Wed Jan 08, 2014 10:18 pm
by hobbyturnedobsession
Looks good man!
Re: 96 Bronco - Project "Cheryl"
Posted: Thu Jan 09, 2014 12:45 am
by VintageIronFab
Thanks! Tony.. I just realized why you and a few others do the clean behind the grill/ lights treatment-- because literally in 3 minutes the grill is out!
Re: 96 Bronco - Project "Cheryl"
Posted: Thu Jan 09, 2014 5:57 pm
by VintageIronFab
Stupid how a brand new motorcraft gas cap with the lanyard for $14.16 delivered makes me happy
