My 93 Beater..
Posted: Tue Mar 05, 2013 9:34 pm
So ill start a build thread for anything i'll do to the Bronco.
Sway A Way Race Runner Coil Overs front. With Air Soft bump stops. Custom Shock hoops With Engine cross bar. Flared fenders. Extended Radius arms with Hiems. Rear is Custom Shock hoop with 4 fox shocks. Limit straps all the way around. 351 With auto trans. Thats the basics. I was building offroad stuff before i was doing the drag racing thing. So i figured it was time to get back into for awhile.
So here it is.......
Start of the rear bumper build. 1 3/4 tubing cause its what i had layin around.
More... Not done. Not as fancy as others but i like it..
Need a couple more strength braces...
Tilted the hoop down so the tail gate would open with no interferance.
Not much today but i did make the license plate light brackets. Figured I'd use the stock bumper ones. Need to round corners still. Then weld to bumper.
Sway A Way Race Runner Coil Overs front. With Air Soft bump stops. Custom Shock hoops With Engine cross bar. Flared fenders. Extended Radius arms with Hiems. Rear is Custom Shock hoop with 4 fox shocks. Limit straps all the way around. 351 With auto trans. Thats the basics. I was building offroad stuff before i was doing the drag racing thing. So i figured it was time to get back into for awhile.
So here it is.......
Start of the rear bumper build. 1 3/4 tubing cause its what i had layin around.
More... Not done. Not as fancy as others but i like it..
Need a couple more strength braces...Tilted the hoop down so the tail gate would open with no interferance.
Not much today but i did make the license plate light brackets. Figured I'd use the stock bumper ones. Need to round corners still. Then weld to bumper.
I didnt get to finish it this weekend with all the other stuff i was doing. Did a bunch of welding for some friends. But i didn get the coilovers off so i can get em rebuilt and charged. 