Andy J's 1995 xlt

Andy Jones · Post by **Andy Jones** » Tue Nov 17, 2015 9:08 am

birdco85 wrote:So you had to modify your pitman arm?

Yes

birdco85 · Post by **birdco85** » Tue Nov 17, 2015 9:10 am

Thanks, any pictures of what you had to do? Mine is ready to be picked up so you posting pictures of your install was at the perfect time.

Andy Jones · Post by **Andy Jones** » Tue Nov 17, 2015 9:11 am

birdco85 wrote:Thanks, any pictures of what you had to do? Mine is ready to be picked up so you posting pictures of your install was at the perfect time.

birdco85 · Post by **birdco85** » Tue Nov 17, 2015 1:10 pm

Awesome, thanks for the pics. I want expecting having to modify it, I thought he included one done. I guess this will be where I learn if my welds are good or not.

funinthesun95 · Post by **funinthesun95** » Mon Nov 23, 2015 1:44 pm

Andy Jones wrote:

I am digging the all straight tie rods.

no clearance issues at full bump Huh? I get it dual so that changes things.

Andy Jones · Post by **Andy Jones** » Mon Nov 23, 2015 1:57 pm

funinthesun95 wrote:
Andy Jones wrote:

I am digging the all straight tie rods.

no clearance issues at full bump Huh? I get it dual so that changes things.

Driver Side and Passenger side need about a 3° bend to get full bump. Very minimal, you'll barely be able to see it .

funinthesun95 · Post by **funinthesun95** » Mon Nov 23, 2015 1:59 pm

Cool.... thanks for the reply Andy

Andy Jones · Post by **Andy Jones** » Wed Jan 06, 2016 4:59 pm

Huge updates coming for my build in the next week ! I'll finally be able to see this rig with wheels and tire's on it .! Then it's off to her new home, to be finished .

Andy Jones · Post by **Andy Jones** » Mon Jan 11, 2016 3:18 pm

Jamar 40 spline 5x5.5 TT Hubs.. Super stoked on these bad boys !

dtbback · Post by **dtbback** » Mon Jan 11, 2016 3:24 pm

DAMN!!! Those are some beefy hubs!!!

tcm glx · Post by **tcm glx** » Mon Jan 11, 2016 3:31 pm

40 spline. Wow awesome!

Andy Jones · Post by **Andy Jones** » Wed Jan 13, 2016 7:14 pm

Test fitting the Jamar hubs .!

Andy Jones · Post by **Andy Jones** » Wed Jan 13, 2016 7:17 pm

Really pumped on these hubs! The quality of the machining is top notch. Oh.. And Camburg snouts work with these.. They told me that they didn't for reason ...

dtbback · Post by **dtbback** » Wed Jan 13, 2016 8:13 pm

Hubba hubba hubba

tcm glx · Post by **tcm glx** » Thu Jan 14, 2016 6:39 pm

So damnnnnnn nice!!

Andy Jones · Post by **Andy Jones** » Fri Jan 15, 2016 2:42 pm

Thanks guys !

motoxscott · Post by **motoxscott** » Sat Jan 23, 2016 5:02 pm

Andy Jones wrote:Oh.. And Camburg snouts work with these.. They told me that they didn't for reason ...

Not sure what you're implying if anything, but no one at Camburg would know if a 2.5 Jamar rear hub would work with our spindle unless you brought us the hub to fit, gave us Jamars spindle dimensions or told us the bearing and seal dimensions.

We get customers from time to time bringing us other peoples hubs, spindles, etc to see if they will work with our parts. We help them as much as we can. Sometimes they work, sometimes they don't. Good to know the Jamar stuff fits.

- Scott

motoxscott · Post by **motoxscott** » Sat Jan 23, 2016 5:10 pm

Looking good by the way lol ... one of these days mine will be hitting the dirt.

VintageIronFab · Post by **VintageIronFab** » Sat Jan 23, 2016 7:42 pm

Andy are those hangers from a 98-ish F150? I was at salvage yard the other day and that is about exactly what they look like- much farther down than a 80-96 hanger-- they might be custom....

Andy Jones · Post by **Andy Jones** » Sat Jan 23, 2016 8:04 pm

motoxscott wrote:
Andy Jones wrote:Oh.. And Camburg snouts work with these.. They told me that they didn't for reason ...
Not sure what you're implying if anything, but no one at Camburg would know if a 2.5 Jamar rear hub would work with our spindle unless you brought us the hub to fit, gave us Jamars spindle dimensions or told us the bearing and seal dimensions.

We get customers from time to time bringing us other peoples hubs, spindles, etc to see if they will work with our parts. We help them as much as we can. Sometimes they work, sometimes they don't. Good to know the Jamar stuff fits.

- Scott

I believe Carlos was the one that said the two were not compatible, when I had called . Not a big deal.. I'm super stoked that I was able to use my Camburg snouts with the Jamar Prerunner hub. And thanks Scott ! Can't wait to see yours finished . I do need to make another call over to you guys . I need to order the spindle nut, locking ring only.. Is that something sold separately?

Andy J's 1995 xlt

Andy J's 1995 xlt

Andy J's 1995 xlt

Andy J's 1995 xlt

Andy J's 1995 xlt

Re: Andy J's 1995 xlt

Andy J's 1995 xlt

Re: Andy J's 1995 xlt

Andy J's 1995 xlt

Andy J's 1995 xlt

Re: Andy J's 1995 xlt

Re: Andy J's 1995 xlt

Andy J's 1995 xlt

Andy J's 1995 xlt

Re: Andy J's 1995 xlt

Re: Andy J's 1995 xlt

Andy J's 1995 xlt

Re: Andy J's 1995 xlt

Re: Andy J's 1995 xlt

Re: Andy J's 1995 xlt

Andy J's 1995 xlt