Jb's four door build

Rmc · Post by **Rmc** » Sat Apr 26, 2014 7:17 pm

Did you build the Y pipe? Where did you get the flanges if so. I'm needing to replace mine, it's rusted n cracked at the y flange.

Jbfab · Post by **Jbfab** » Sun Apr 27, 2014 3:25 pm

I bought all the parts from a member on fsb. I belive they were from napa.

Rmc · Post by **Rmc** » Sun Apr 27, 2014 4:39 pm

Looks good man, nice and gradual on the y flange. Thanks man, ill check napa.

Jbfab · Post by **Jbfab** » Sun Apr 27, 2014 7:41 pm

Rmc wrote:Looks good man, nice and gradual on the y flange. Thanks man, ill check napa.

Here is the one i took off, had it made many moons ago at a local midakie. In the pic your looking strait down the pipe from the drivers side. Heavy lack of flow.

Rmc · Post by **Rmc** » Sun Apr 27, 2014 7:48 pm

I'm debaiting buying all the stainless bends from summit and fabbing my own from headers back.

Jbfab · Post by **Jbfab** » Mon Apr 28, 2014 7:14 am

I pulled it off with two collectors, two J bends and the flowmaster y pipe. Mine is mild but painted it with vht silver. Its stainless from the muffler back since it will be exposed in the wheel well.

Jbfab · Post by **Jbfab** » Mon May 26, 2014 9:22 am

Rmc · Post by **Rmc** » Mon May 26, 2014 10:06 am

That's one sexy hood ya got there!

Jbfab · Post by **Jbfab** » Sat Jul 05, 2014 5:07 pm

Finished my exaust and started on setting the two main hoops.

Jbfab · Post by **Jbfab** » Sun Jul 13, 2014 9:05 am

Moving along slowly on the cage. Just tacking in case i want to make changes. Might change the rear down bars, idk.

Jbfab · Post by **Jbfab** » Sun Jun 21, 2015 5:47 pm

Finaly getting some color.

robertcrav · Post by **robertcrav** » Mon Jun 22, 2015 7:33 am

Sweet

cypher · Post by **cypher** » Mon Jun 22, 2015 9:22 am

copper? Looks nice!

JonMac31 · Post by **JonMac31** » Fri Jun 26, 2015 11:38 am

Where did you get the hood? That's badass!

ChaseTruck754 · Post by **ChaseTruck754** » Fri Jun 26, 2015 12:39 pm

That's the Mike MCQueen hood. There is a thread on here about his glass.

JonMac31 · Post by **JonMac31** » Fri Jun 26, 2015 1:43 pm

Thanks ChaseTruck754! I will have to search for it!

ChaseTruck754 · Post by **ChaseTruck754** » Fri Jun 26, 2015 1:45 pm

Here's the link. Didn't have the spare minute to search for that earlier.

http://www.gofastbroncos.com/forum/view ... =14&t=5896

Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build

Re: Jb's four door build