GoFastBroncos.com

1994 Bronco XLT Prerunner
Really hate to sell, as this Bronco is incredibly fun, but I need the money to finish the race truck and settle down a little bit with all the projects. I am currently daily driving this Bronco. It handles very well for a Bronco, and I wouldn’t hesitate to drive it across the states. I will continue to build and enjoy the Bronco till it turns into cash in my hand. No hidden hack fab work on this Bronco. Clean title. I will smog the bronco (CA smog legal still).

Nearly all of the pictures are of the Bronco while I was building it. Hood, bumper, etc. for example came after many of the photos. Photo's also show the bronco sitting on my race truck's wheels, not the 35" BFG's that the bronco now sits on.

Drivetrain:
-351W Runs very strong. Recent oil change and tune up. 3” turn down
Dump after cats. No muffler. Both cats untampered. Sounds healthy and mean. 135k miles. Engine is torque strapped to frame.
-E4OD Transmission shifts great
-8.8 Rear with welded tubes and all new brake components and oil
-4.56 gears front and rear. Rearend has tight posi. Front Diff open.
-Extended D44 shafts and Warn hubs
-(5) 90% 35x12.5x15 BFG AT’s on new American Racing Outlaw II’s
-Electric Transfer case engages nicely
-No leaks, everything maintained

Body:
-Autofab hood, fenders, and bedsides. Bedsides professionally mounted,
using dzeus fasteners for easy removal. Hood is double layered and
incorporates factory hinges and is held down by Aero-catch Latches.
-Front DOM bumper with skids and 3 7” HIDs. Rear “custom” bumper.
-No dents or major flaws

Interior:
-2” .120 DOM tightly tucked cage front to rear. All tubes hug panels.
Secondary roof sheet metal clearance for further tucking the 1 ¾ diagonals for more head room (I’m 6’7”). 1 ¾ Tucked underneath factory dash along windshield.
- (3) matching PRP daily-driver (low-side) seats. Front seats on sliders.
- (3) matching Crow padded harnesses
- Rear seat removable for mobile hotel room. A factory bench can still bolt in as well.
- Deck, amp, sub
- Dual Yellow top Optima batteries (both new) with Blue-Sea Selector
- Power windows, locks

Front suspension:
-Plated frame, plated TTB pivots
-Cut, turned, extended, plated and trussed Dana 44 TTB with FK Uniball pivots and extended shafts. Freshly powder Coated
-Warn hubs, 4.56 gears, functional 4wd
-Custom radius arms and pivots. Dimpled and plated. Freshly Powdercoated.
-2.5x14” King Coilovers 300/400 Coils
-2.0x4” Hydro bumps
-2” .120 DOM engine cage with core support bracing and accessory
Mounting
-~18” Travel

Rear suspension:
-Deaver leaf packs
-2.5x14” SAW (shorter body length) piggybacks. Flutter stack / rate plate on
compression and 8 stack rebound
-Custom shock crossmember hugging bottom of floor
-5/8 U bolts and RuffStuff spring plates
-15”-16” travel

Like any vehicle… there is TLC to be done.
I’m currently working on these things, and can adjust price if sold before these things are done. $9,500 is assuming these are done.
-Gas gauge doesn’t work. It’s pegged (shorting to ground).
-Rear window works but not with the switches (wiring issue between dash and tailgate)
-3rd PRP seat not yet mounted
-Heater and AC equipment all there. However condenser needs replacing (has a hole from a rock), and needs simple ducts ran from heater box to vents. Had to eliminate factory ducts to tuck the cage under the dash
-Glovebox latch piece broke off the dash piece

$9,500. No trades, unless it’s a car/truck I’m interested in, plus $6k+ on top. No straight across trades, I must have atleast $6k cash in hand.
I have an incredible amount of labor and money into this Bronco, no low-ballers, and don’t waste my time.
I’m located in Folsom, near Sacramento.

Looks like a nice ride for a good price. Good luck with the sale!

Link to the build thread? I cant find it.

here you go:
http://www.gofastbroncos.com/forum/view ... &start=100

Great price. This thing should go fast.

Sold
Super bummed, but have to remind myself it had to happen. Too many projects
Will be finishing up a few things on it, and the new owner will be flying up at the end of the month.

Congrats on the sale! I really enjoyed following your build thread. Good luck for the future.

Arrrrrrrrg
U know how much cash I have on my gerage floor
Waiting to be bolted on the bronco or DOM that's rusting away
Nice Bronco by the way
Any how if you like giving stuff away stop by and finish my cage
I'll buy the beer

This is for sale on Inland Empire craigslist. Anyone know why the new owner thinks it has appreciated $5,500 in three months?

I was thinking the same thing when I saw the new ad linked earlier. Guy probably thinks he got a steal & is trying to turn a quick buck or 2.

Nothing wrong with making a buck or two. I'd be willing to bet most of you guys work for someone who agrees

Seabass wrote:Nothing wrong with making a buck or two. I'd be willing to bet most of you guys work for someone who agrees

Yup & that's why that guy & me are always at odds. He's saying we're not making enough to give me more of a cut & I say all the crap he's buying makes it looks like he's lying!


And yes I can understand making a buck. This is just a "small world" in this sport/hobby/whatever & that's a pretty quick turn around. I think I'll offer him $6k

Biggest issue is that the guy who bought it agreed to pay 8k for it if ryan brought it from nor cal down to him and once he got here low balled him to 6500$.... stupid mistake on ryans part but also a shitty move on from the new owner

Based on that I'll offer him $10k & show up with $3k

Hmmmm. I just went to email him & the post has been flagged for removal

Who bought it? That "deal maker" guy?

Never mind,I think that's him I just saw the post I know it's the same guy. I'm thinking it's the owner of tough light, he flips a lot of prerunners. Javier I think his name is. He bought a dude I knows ranger a few months ago, identical deal. Drove down from NorCal, low balled from asking price, dude drove home via another mutual friend. Heard hesanice guy but it sounds like he flips constantly.

I'm all for finding a deal fixing it up and making a couple bucks but the fact this guy is scamming people to travel to get low balled is shady.
Where is he located?

Menifee someplace not sure exactly.

I just hit up my NorCal buddy asking about the details his deal. Stand by, I'll get to the bottom of the one week 5500$ flip and see if it's the same seller.
What I don't want to have happen is blame someone who is not involved or at fault.