Bronco 6” over beams, radius arms, swing steer, 4.88 diff $1300

ItzEnsign · Post by **ItzEnsign** » Sat Sep 28, 2019 11:16 am

My beams off the bronco. There 6” over per side. My track width with 35s were 89” and with 37s we’re 91”. Comes with radius arms, diff with 4.88 gears, .250 wall threaded tie rods, axles. Only needs radius arm mounts, knuckles off your current beams and drill the holes out on the steering ear to 5/8s. And needs the stub that goes from the diff to passenger side beam axle (use off your current set up) then just tabs for the swinger. That’s it! $1300, I feel that is very fair. Let me know 951-240-1314 located in canyon lake, want them gone.

Sent from my iPhone using Tapatalk

cs_drums · Post by **cs_drums** » Sun Sep 29, 2019 11:14 am

I think we worked out a deal a while back on the diff. I lost the message chain and forgot. Hit me up if you still want to do the deal.

760-419-0943

Sent from my moto x4 using Tapatalk

ItzEnsign · Post by **ItzEnsign** » Wed Oct 30, 2019 4:06 pm

Bump everything’s off the truck. Want them gone! Tig welded radius arms

Sent from my iPhone using Tapatalk