Radius Arm Frame Mounts

drewbee88 · Post by **drewbee88** » Tue Feb 16, 2016 11:34 am

i have a extra set of radius arm mounts. I had a brain fart today and built two lefts, so I made two rights. I only need one set. 75$ plus shipping im pretty sure i can fit them in a medium flat rate box

-Andrew

philofab · Post by **philofab** » Tue Feb 16, 2016 12:34 pm

Spread and heim bolt size?

Tchajagos · Post by **Tchajagos** » Tue Feb 16, 2016 12:57 pm

Pictures are broken

Garlic Bronco · Post by **Garlic Bronco** » Tue Feb 16, 2016 1:14 pm

Tchajagos wrote:Pictures are broken

they work for me, maybe filtered?

i re uploaded them to another host in case

ChaseTruck754 · Post by **ChaseTruck754** » Tue Feb 16, 2016 3:03 pm

all pictures working fine for me.

drewbee88 · Post by **drewbee88** » Tue Feb 16, 2016 4:14 pm

standard 2.625 spread, 3/4 bolt size. from the frame to center of bolt is 4".

Tchajagos · Post by **Tchajagos** » Tue Feb 16, 2016 4:40 pm

Interested. Message sent I think.

drewbee88 · Post by **drewbee88** » Tue Feb 16, 2016 4:45 pm

here they are in cad. the parts are keyed together with full overlapping corner joints vs the typical open corner joint.

ChaseTruck754 · Post by **ChaseTruck754** » Tue Feb 16, 2016 5:52 pm

Are the bolt holes for the frame side matched to existing rivets or holes in the frame, or to be drilled?

drewbee88 · Post by **drewbee88** » Tue Feb 16, 2016 6:13 pm

ChaseTruck754 wrote:Are the bolt holes for the frame side matched to existing rivets or holes in the frame, or to be drilled?

they do not correspond to any existing bolt holes. My radius arms are longer than usual so they are moved back farther on frame. if there is a need i could make a set that index's off existing bolt holes. i am welding them directly to the frame. i left the frame side solid so if you wanted to bolt them on you can drill them to match any existing holes on bottom of frame.

drewbee88 · Post by **drewbee88** » Tue Feb 16, 2016 9:43 pm