Bronco and OBS LED Dome Light Housings
Posted: Fri Apr 26, 2024 8:57 am
One thing I've never liked about the many broncos and OBS fords I've owned is the useless dome light. Pretty excited about this project. My buddy Eric and I developed these direct replacement 2 piece billet cnc milled dome lights for these trucks. They are finished in black anodize and use a KC Cyclone that is easy to mate to the OEM electronics and retain the functionality of the dash switch (turning the headlight knob all the way counter clockwise) and the factory door switch.
We made 50 of these and may make more depending on how they sell. The intent here was make something that would keep stock dimensions but be small enough to clear the Solo Motorsports cage. For those who aren't aware there are several versions of OEM dome lights in these vehicles over the years but they all mount and wire the same. Below is a picture and a link to a couple IG videos I did of the products. I hope you guys enjoy.
To Recap:
These fit 1987-1996 Broncos and OBS trucks (1997 F-250/350 Trucks)
These kits include the following:
- 2-piece CNC billet anodize housing
- Mounting Hardware
- Electrical connectors
You provide: KC Cyclone of your choice
These are designed to be 100% bolt in to the factory location, clear a @solomotorsports roll cage, and install in under an hour with basic hand tools, and provide tons more lighting over the OEM unit without being overwhelming.
$250 plus shipping, they can be ordered through my website, also willing to meet up with local dudes and do PayPal/cash/Venmo/Zelle
We made 50 of these and may make more depending on how they sell. The intent here was make something that would keep stock dimensions but be small enough to clear the Solo Motorsports cage. For those who aren't aware there are several versions of OEM dome lights in these vehicles over the years but they all mount and wire the same. Below is a picture and a link to a couple IG videos I did of the products. I hope you guys enjoy.
To Recap:
These fit 1987-1996 Broncos and OBS trucks (1997 F-250/350 Trucks)
These kits include the following:
- 2-piece CNC billet anodize housing
- Mounting Hardware
- Electrical connectors
You provide: KC Cyclone of your choice
These are designed to be 100% bolt in to the factory location, clear a @solomotorsports roll cage, and install in under an hour with basic hand tools, and provide tons more lighting over the OEM unit without being overwhelming.
$250 plus shipping, they can be ordered through my website, also willing to meet up with local dudes and do PayPal/cash/Venmo/Zelle