Dana 44 solid axle -$750
-
TTBLover94
- Posts: 45
- Joined: Sat Oct 12, 2013 8:30 pm
- Bronco Info: 1994 F150 4x4. 5.8L with MAF, equal length headers, gt40 heads. 8" lift, 33s & 4.10 gears
Dana 44 solid axle -$750
I have a Dana 44 solid axle out of a 79 Bronco. The guy I bought it from had it under a 94 F150 and installed the auto locking hubs on it. I had the axle checked out, new bearings and seals were installed. Center section has been sand blasted and ready for paint. I have the coil buckets, the radius arms (original owner was in the process of modifying them, needs some grinding and re-welding to finish, looks like 2" square sch. 40 with a 1/4" wall), 1.25 heim bung on the rear no joint though. I have the calipers, brake lines, a set of F350 shock towers. The coil bucket and retainers for the axle. Bronco graveyard brake backing plates. Might have some other odds and ends for it but thats what I can remember. $750 for it all. Bronco graveyard has the pre fabbed parts to finish this on their site.
You do not have the required permissions to view the files attached to this post.
-
TTBLover94
- Posts: 45
- Joined: Sat Oct 12, 2013 8:30 pm
- Bronco Info: 1994 F150 4x4. 5.8L with MAF, equal length headers, gt40 heads. 8" lift, 33s & 4.10 gears
-
TTBLover94
- Posts: 45
- Joined: Sat Oct 12, 2013 8:30 pm
- Bronco Info: 1994 F150 4x4. 5.8L with MAF, equal length headers, gt40 heads. 8" lift, 33s & 4.10 gears
-
TTBLover94
- Posts: 45
- Joined: Sat Oct 12, 2013 8:30 pm
- Bronco Info: 1994 F150 4x4. 5.8L with MAF, equal length headers, gt40 heads. 8" lift, 33s & 4.10 gears
Re: Dana 44 solid axle -$750
$500 for it all.
-
VintageIronFab
- Posts: 2337
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: Dana 44 solid axle -$750
What ratio and differential is in this?
-
TTBLover94
- Posts: 45
- Joined: Sat Oct 12, 2013 8:30 pm
- Bronco Info: 1994 F150 4x4. 5.8L with MAF, equal length headers, gt40 heads. 8" lift, 33s & 4.10 gears
Re: Dana 44 solid axle -$750
3.50 gears. Stock differential.
-
TTBLover94
- Posts: 45
- Joined: Sat Oct 12, 2013 8:30 pm
- Bronco Info: 1994 F150 4x4. 5.8L with MAF, equal length headers, gt40 heads. 8" lift, 33s & 4.10 gears
Re: Dana 44 solid axle -$750
Non limited slip axle
-
TTBLover94
- Posts: 45
- Joined: Sat Oct 12, 2013 8:30 pm
- Bronco Info: 1994 F150 4x4. 5.8L with MAF, equal length headers, gt40 heads. 8" lift, 33s & 4.10 gears
Re: Dana 44 solid axle -$750
Still up for grabs. Throw me some offers.