Deaver J40 springs and SWP bronco shackles

[TurboJoe]

I may be parting by Baja bug... what are you looking for? I may have what your looking for?

Thanks,
Joe

[hobbyturnedobsession]

A lot hahah. It really depends on what you have? I really need a 002 trans, 10" stroke shocks (springs preferred) rear axles hubs etc. Tell me what your willing to part with and if its more on yours or my end we can work it out.

[TurboJoe]

I do have a 002. When I bought it I was told it was a good usable stock trans. I would want to pull the bell housing to check the ring gear to make sure you wont get junk. If I part out the bug I won't be needing the 002. I also have a 6 over beam with tweeds arms and 10" towers set up with leafs and dual adjusters cycles 14"( close to $1200 in it ). Mild steel plate 3x3 arms And wide 5 disc brakes all around. I feel the trans would be a straight across trade.

Let me know what you think or what you need,
Joe

[hobbyturnedobsession]

I can get a good 002 trans for 350. I can do the 002 bus trans and a hundred fifty.

[TurboJoe]

At this time I cant put cash on top. If there is other parts I may have something though that would work for both of us?

Joe

[hobbyturnedobsession]

What style arms are they? Are the stock or extended? Depending on the outcome I may just trade for other parts and we can talk about the trans separate.

[TurboJoe]

The arms are 2 1/4" longer and 1" wider with 300m link pins.

[hobbyturnedobsession]

How about the beam and arms/ link pins?

[hobbyturnedobsession]

How about the beam arms n link pins?

[TurboJoe]

You would get beam with bushings, Arms And link pins. Anything you can put on top Bronco stuff or otherwise?

Thanks,
Joe

[hobbyturnedobsession]

It depends on condition of the parts. I have some other parts available

[TurboJoe]

Parts are/were new. Baja didnt get finished when I bought the bronco.

Joe

[TurboJoe]

Oh and leafs come with too...

Joe

[hobbyturnedobsession]

What else are you looking for?

[TurboJoe]

What do you have? Im looking for Bronco parts or fabrication supplies.

[hobbyturnedobsession]

I've got a a rear bench seat with a chase rack and used harnesses, rear bumper with spare tire carrier and more. My bronco is torn apart.

[TurboJoe]

Ok Im sure we will figure something out... Ill get the Baja on the lift this Friday and pull your parts. Maybe meet over the weekend?

Joe

[hobbyturnedobsession]

Sorry gentlemen but sale pending.

[TurboJoe]

With me right?

[hobbyturnedobsession]

Sorry man a guy handed me cash money.