Bronco Suspension and wheels and tires

hollandermotorsports · Thu Jul 30, 2015 1:30 pm

As many know I stripped these parts off of the Bronco I am parting out. Long story short I'm building a stock width TTB truck now so that's why I got the parts. But I ended up buying a complete other kit as well. So here is my list of extra parts. Make me an offer and we can go from there. Solo cut and turned beams with uniball inner pivots, solo coil over and bypass hoops, 12" x 2.5" coil overs, solo hiemed radius arms with brackets, stock ford Bronco 9", VSS kit, 4 fairly new 35" GT grabbers on Methods and 1 brand new set up. I plan to sell the beams loaded knuckle to knuckle with 4.88 gears in them so you can slam and go. Make offer on parts you need. 760-803-9469

robertcrav · Post by **robertcrav** » Thu Jul 30, 2015 1:33 pm

how much for the wheels/tires?

Really only interested in the wheels...but understand if you don't want to seperate

hooter95 · Post by **hooter95** » Thu Jul 30, 2015 2:51 pm

How much for solo engine cage?

cs_drums · Post by **cs_drums** » Thu Jul 30, 2015 4:12 pm

If you end up splitting up front end parts I'll take the 4.88 3rd

hollandermotorsports · Thu Jul 30, 2015 4:31 pm

cs_drums wrote:If you end up splitting up front end parts I'll take the 4.88 3rd

If diff comes out I will keep for my Bronco same gears sorry.

hollandermotorsports · Thu Jul 30, 2015 4:31 pm

hooter95 wrote:How much for solo engine cage?

$500

hollandermotorsports · Thu Jul 30, 2015 4:35 pm

robertcrav wrote:how much for the wheels/tires?

Really only interested in the wheels...but understand if you don't want to seperate

I would really like $1300 for the complete set or just keep for the new truck.

Randyg12 · Post by **Randyg12** » Fri Jul 31, 2015 8:54 am

What size are the wheels? Interested in the whole tire package.

hollandermotorsports · Fri Jul 31, 2015 10:47 am

Randyg12 wrote:What size are the wheels? Interested in the whole tire package.

15"

eoffroader · Post by **eoffroader** » Sun Aug 02, 2015 9:37 am

How much for the radius arms?

hollandermotorsports · Mon Aug 03, 2015 8:03 am

eoffroader wrote:How much for the radius arms?

I'm not really looking to separate from the beams.

hollandermotorsports · Mon Aug 03, 2015 8:10 am

Update I am planning on keeping the shocks, wheels, 9", and front diff. So I will do $2k for hoops, beams, radius arms with brackets and hardware.

VintageIronFab · Post by **VintageIronFab** » Mon Aug 03, 2015 11:35 am

Any chance it's got nice gray 92-96 door panels?

hollandermotorsports · Mon Aug 03, 2015 12:31 pm

VintageIronFab wrote:Any chance it's got nice gray 92-96 door panels?

No sorry

eoffroader · Post by **eoffroader** » Mon Aug 03, 2015 3:36 pm

Ok thanks anyways that is a good deal for sure though