White 1994 F-150 Sleeper Build

birdco85 · Post by **birdco85** » Fri Aug 28, 2015 10:24 pm

cs_drums wrote:No they have a kit now too

Fo realz?

RyanDS650X · Post by **RyanDS650X** » Sat Aug 29, 2015 8:41 am

If Facebook is right and Cho built this than it would appear to have a 64kit.

nubreed71 · Post by **nubreed71** » Sat Aug 29, 2015 8:49 am

Might be a good idea to start a thread on the Richer 64 kit...

Andy Jones · Post by **Andy Jones** » Sat Aug 29, 2015 9:13 am

nubreed71 wrote:Might be a good idea to start a thread on the Richer 64 kit...

I 2nd this..
I had to piece mine together, using parts from Giant, KelFab , and Deaver..

Andy Jones · Post by **Andy Jones** » Sat Aug 29, 2015 9:14 am

If Richers front hanger mount is built better then Giants, I'd like to upgrade ..

birdco85 · Post by **birdco85** » Sat Aug 29, 2015 11:00 am

I saw that pic this morning. Nice upgrade for us non caged guys

C H O · Post by **C H O** » Sat Aug 29, 2015 12:23 pm

Sorry to jam up your thread with all of this 64' talk Taylor, we'll cut you a good deal when you are ready to pull the trigger on spring under!

For any one that is interested in our spring under kit please pm me. it is the same pack as the giant kit which means our brackets will work as a upgrade for anybody looking for a heavier duty part. We will also potentially be prototyping a 3" spring under pack for the guys that load their broncos like pack mules. The spring under kit is a night and day difference over the spring over. We are able to safely notch the frame 3 inches for more up travel while maintaining a low ride height. The added arch and preload allows the wheels to fall into whoops more efficiently and prevents packing.

nubreed71 · Post by **nubreed71** » Sat Aug 29, 2015 9:39 pm

Haha, don't sweat it Cho! Looks killer...love the extra up travel too. I have a feeling that when we do the axle swap, I'll probably just do this at the same time. As long as you can keep the shocks under the bed

nubreed71 · Post by **nubreed71** » Tue Sep 15, 2015 5:25 am

Decided it was time to take the rear window off my shell and repaint the frame, replace all the rubber weather stripping, and slap new struts and locks on it. It wasn't bad before, but it sure is nice now...make the shell look like a new shell again.

cypher · Post by **cypher** » Tue Sep 15, 2015 7:21 am

Looking dialed as usual. Nice job

nubreed71 · Post by **nubreed71** » Wed Sep 23, 2015 7:49 pm

Picked some stuff up from zinc coating today.

Rmc · Post by **Rmc** » Wed Sep 23, 2015 9:04 pm

Oh getting all kibbe tech now eh? Lol looks good man! Nice touch on the zinc.

nubreed71 · Post by **nubreed71** » Wed Sep 23, 2015 9:56 pm

Hahahaha, I had to stop myself when I was considering doing my steering extenders and/or my pinion guard.

cs_drums · Post by **cs_drums** » Thu Sep 24, 2015 3:56 pm

My buddy did black zinc. Pretty bad ass and you can still see cracks as opposed to powdercoat.

tcm glx · Post by **tcm glx** » Thu Sep 24, 2015 4:11 pm

Prettiest street truck ever!!

nubreed71 · Post by **nubreed71** » Thu Sep 24, 2015 5:07 pm

You jealous bro?

DMbronco · Post by **DMbronco** » Thu Sep 24, 2015 5:10 pm

yeah- i cant keep my clean!

tcm glx · Post by **tcm glx** » Thu Sep 24, 2015 5:10 pm

You mean brahhhh.

cs_drums · Post by **cs_drums** » Thu Sep 24, 2015 5:42 pm

The illusion of clean....

nubreed71 · Post by **nubreed71** » Thu Oct 01, 2015 1:23 pm

Dropped the truck off at Richer yesterday and decided to play a little game of dress up. I like the NV's, but think I still prefer the Alcoa look alikes.