4" wider beams
Posted: Sat Jul 03, 2010 8:12 pm
I have been working on these beams off an on for a few days I still have to cut and turn them. I am going to have new axles made
GoFastBroncos.com
https://www.gofastbroncos.com/forum/
4" wider beams
https://www.gofastbroncos.com/forum/viewtopic.php?f=15&t=897
Page 1 of 1
Re: 4" wider beams
Posted: Sun Jul 04, 2010 1:11 pm
Nice! Are you going to stick with the stock pivot bushings or go with uniballs?
Re: 4" wider beams
Posted: Sun Jul 04, 2010 2:12 pm
Stock bushings for now.
Re: 4" wider beams
Posted: Wed Jul 21, 2010 10:55 pm
Re: 4" wider beams
Posted: Wed Jul 21, 2010 11:20 pm
Have you tested axle alignment with the extensions?
Re: 4" wider beams
Posted: Wed Jul 21, 2010 11:25 pm
No but I know I am going to have to clock the third member. My axles are getting splined right now so as soon as I get them I will do it
Here is a picture of my jig for the cut and turn
Here is a picture of my jig for the cut and turn