Hello All,
Are the Procomp coils decent quality? There are a 2.5" set here locally that I am thinking about buying. More importantly if you do a set of C&T beams-- stock width-- you would add a couple degrees of camber right? How many degrees do the upper BJ sleeves account for?
Thanks,
Matt
Procomp COils
-
VintageIronFab
- Posts: 2337
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
-
Dezertbronco
- Posts: 652
- Joined: Fri Jan 22, 2010 12:29 am
- Bronco Info: 1990 Bronco EB
- Location: Highland, CA.
Re: Procomp COils
Yes pro comp coils are fine, if you are going to cut and turn then I would use a 4" spring so you will get some useable travel out of it.
-
TurboJoe
- Posts: 61
- Joined: Fri Dec 14, 2012 3:28 pm
- Bronco Info: 1968 with 302 Highpinion 44 and 31 spline 9" on 38's and 1996 xlt 351 prerunner in the making
- Location: Glendora CA
Re: Procomp COils
I have 4" Procomps on my 96. Ride is great and the spring rate works well on big hits. They settled about an inch but I am still nose high. Giant Motorsports recommended using them as well.
joe
joe
-
VintageIronFab
- Posts: 2337
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: Procomp COils
Joe-- hey thanks for the review-- thats kind of exactly what I was hoping/wanting to know. The Giant info is good to know as well!
Thanks again!
Thanks again!