GoFastBroncos.com

I want to remove my dash as a whole unit. I want to put it in another Bronco any tricks or tips, links? Thanks pm

Be very patient and do not allow yourself to have a pair of dykes handy otherwise frustration will show its ugly head. Also be very gentle and dont force anything. 20 year old plastic dont respond well to prybars either.

I got it out! I have no doors,hood fenders,etc. on right now so that may have helped a lot. Pretty much took off dash pad and gage cluster face. 8 bolts, two on each lower corner and a couple around top speaker area.I had to cut one thing, the gear indicator and it was messed up anyways.I got the thing out as a unit much like they do when they install them at the factory. I'll get some pictures up later.

I did this on my 86 and i just destroyed it! But I wanted to upgrade to the 1993+ dash anyway! Still it was a lot of work so congrats on getting out in one piece.

yo gang, here a coupla swaps;

Installation, Custom KWS in an 87
Source: by Chris P (Maximum) at http://www.abysmal.com/bronco/dash/dashboard.html

Installation pic from a 93 Bronco in an 81
Source: by PwrStnd at http://www.superford.org/registry/vehic ... 46#content

Installation pics from an 04 F-150 Supercrew in a 78
Source: by Quint C (Quints Bronco Project, (04 F-150 Supercrew drivetrain)
http://home.comcast.net/~qcrispin/bronco/

Dakota Digital Dash Installation in a 73-79
Source: by Trent (Picador, a Four Door 79, InfoFord) at http://www.ncspecialties.com/autobody/d ... /index.htm
Aluminum, Custom Fabrication Info & pics in a 78
Source: by HD78bronco (Brian B) at http://www.cb4x4.com/forums/showthread.php?t=374

Aluminum, Custom, Fabrication & Installation in a 78
Source: by Mike S, (Broncster, BRONKSTER) at http://www.supermotors.net/vehicles/registry/7387/63566
Aluminum, Custom, pics in a 90
Source: by Cam C (BlancoBronco, Project BLANCO) at http://www.supermotors.net/vehicles/registry/5331/57698

a product;
Aluminum, Custom, pic in a 95
Source: by stewartsraceworks.com via web.archive.org
http://web.archive.org/web/200512020319 ... ronco2.jpg
&
Fiberglass & Carbon Fiber Dash/Instrument Panel pics (a product)
Source: by mcneilracinginc.com
http://www.mcneilracinginc.com/off-road ... /index.htm#

This is what Steve83 did to his
83; The rear seat & dash are the original '83 parts, but the instrument cluster has been heavily modified with '88 fuel & volt gauges and a '94 PSOM.
http://www.supermotors.net/registry/2742/69150