Gear ratios
-
ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: What gears?
Does that chart take into account that he has a c6 trans?
-
SteveG
- Admin
- Posts: 6142
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: What gears?
Merging with an existing gear ratio thread.
-
Rmc
- El Jefe
- Posts: 6026
- Joined: Tue Oct 09, 2012 10:22 pm
- Bronco Info: 94 bronco xlt prerunner
- Location: IE SoCal
- Contact:
Re: Gear ratios
Not shure what gears his trans has, he could call Mogie, culhane or tranny mike. they would know off the top of their heads. Figured the chart might help though.
-
drewbee88
- Posts: 502
- Joined: Tue Nov 27, 2012 1:18 pm
- Bronco Info: Rhonda the Bronco is her name, shredding dirt is her game.
- Location: Modesto, CA
Re: Gear ratios
This is what I have used in the past, great for figuring out what you will run on highway, great tool http://www.grimmjeeper.com/gears.html
-
Phoenix0783
- Posts: 658
- Joined: Thu Dec 10, 2009 12:50 pm
- Bronco Info: No more Bronco :(
- Location: Bend, OR
- Contact:
Re: Gear ratios
4.88s might be be a bit low for a non-overdrive transmission.
-
Totti
- Posts: 8
- Joined: Thu Jan 17, 2013 6:17 pm
- Bronco Info: 89 Bronco one piece front end and rear panels, coilovers..Its still a work in process
Re: Gear ratios
Low?..or Hi??Phoenix0783 wrote:4.88s might be be a bit low for a non-overdrive transmission.
-
robertcrav
- Let me google that for you
- Posts: 4313
- Joined: Thu Jan 13, 2011 8:06 am
- Bronco Info: Lana - Stock width c/t coil-overs/bypasses -- Sylvia - Stock width 4" Rancho kit on Billies
- Location: South O.C.
- Contact:
Re: Gear ratios
Both... Numerical high gears are low ...Totti wrote:Low?..or Hi??Phoenix0783 wrote:4.88s might be be a bit low for a non-overdrive transmission.
With 35s, 4.88s, bw1356 and a C6, the engine would be turning 3465 rpm at 70 mph
With 35s, 4.88s, bw1356 and a E4OD, the engine would be turning 2328 rpm at 70 mph
-
Totti
- Posts: 8
- Joined: Thu Jan 17, 2013 6:17 pm
- Bronco Info: 89 Bronco one piece front end and rear panels, coilovers..Its still a work in process
Re: Gear ratios
Thanks..well Ill see in a couple of week how it does first in the road and then in the San Felipe desert..robertcrav wrote:Both... Numerical high gears are low ...Totti wrote:Low?..or Hi??Phoenix0783 wrote:4.88s might be be a bit low for a non-overdrive transmission.
With 35s, 4.88s, bw1356 and a C6, the engine would be turning 3465 rpm at 70 mph
With 35s, 4.88s, bw1356 and a E4OD, the engine would be turning 2328 rpm at 70 mph