No Ball Valve or Jerry Riggin. This is the Thread I followed. Cost less than 50 Bucks for everything and works like a charm. I know the write up Below it says to use a Jeep Valve but the Ford P/N is YG-350. Its 32 bucks at Ford. I heard of the Autozone ones leaking right off the batt and I don't hav...

Have you done the heater core bypass mod yet? I'm in Imperial Valley and its been 115 consistently and my A/C would blow at 75° to 80° max outta the vents. Added a YG-350 Heater Valve that bypasses the heater core then ran the Vacuum line off a "T" going to Blend air door actuator . As soon as I was...

Coil overs and bumps are off getting some love. Wheels and tires came in and this is how she sits for the time being.


Sent from my iPhone using Tapatalk

Got my bumps in and started to mess around. Don’t know if I’m liking this spot to much and I’m second guessing myself on material choice. Right now the plan is to box the mounting completely in with 1/8th all around. I have some 3/16 plate just don’t know if it will be enough. Have a feeling the wei...

Damn that sucks! Hopefully it will just blow over.


Sent from my iPhone using Tapatalk

Here is our process at work we use to weld cast. While the cast gears we weld are 4’ to 6’ round a spindle should be no problem. Haha also due to the size of the spindle I don’t see why you couldn’t cut the cool down times to 15 mins. Depending on the outside temp, our oven gets to 600 to 900*. Plac...

Work has been crazy, so I have been working on it when I can. Spent a couple days getting it from peices to something that looks semi done lol. https://uploads.tapatalk-cdn.com/20180613/508fb7887a14e8843762b49c92035278.jpg Beams are done and suspension cycled. Everything is in its final spot. https:...

Been Following on insta! Came out Badass! I’m at that point in my build right now where I need steering.


Sent from my iPhone using Tapatalk

More progress. Learned the truck pan isn’t even close. Ordered a Holley Camaro pan and it’s perfect and motor is now in. 6EA1AE81-CEFA-4FB7-82FE-D9BC11606D71.jpeg 66D22B0E-0A6E-43F7-88C4-AED48640A124.jpeg 0601A448-A624-403C-8E3B-AA174B14C94D.jpeg 650A6E6F-DA36-4226-88C9-9A700AF40243.jpeg 313171BC-5...

Always wanted to do glass how rough is it to accomplish? It’s not on all the way, I just hung it there. Honestly, the stocks came off fast. It’s putting everything back together is what is going to be fun. I will most likely running the inner fender to keep everything kept in place good. Sent from ...

Tucked https://uploads.tapatalk-cdn.com/20180517/ad00211b27b3b73bddb12b1f7e629f84.jpg https://uploads.tapatalk-cdn.com/20180517/88d05f5ec1ecf2151d6d64fe9f4a3fdb.jpg Ride height should be about 2 inches lower from this point. Kind hard to get a picture in this spot at the shop. https://uploads.tapata...

Been plugging along little by little. https://uploads.tapatalk-cdn.com/20180517/deb3c6a856d560aefa192dfb2dae66ff.jpg Hung a fender to see what it would look like. Needed some motivation that day lol. https://uploads.tapatalk-cdn.com/20180517/ab294981228bbcf395eb08156013a3aa.jpg Started tearing apart...

Little progress today!



Sent from my iPhone using Tapatalk

Score!


Sent from my iPhone using Tapatalk

IV95BRONCO wrote:one of them 2 options for the rear will work awesome with that front end ur throwing at it

Short course links I’m guessing?


Sent from my iPhone using Tapatalk

http://i63.tinypic.com/2wdaadt.jpg Started to Extend and weld up my beams. Haven't picked up the Tig Torch in a while and it shows. http://i67.tinypic.com/2ilghhj.jpg Plated and adding the truss http://i66.tinypic.com/15p2651.jpg Finally got my uniballs and drilled the cups out. http://i66.tinypic....

Well finally decided I was at that point to start a build thread. After looking for months on the right Bronco that wasn't junked out, I bought a 1994 Bronco from a guy up in Oxnard for a deal I couldn't pass up. Only thing wrong was the A/C didn't work but that was an easy fix!. Original plan was t...

Interested in Coilovers and Bumps!

NIce clean bronco! What are you plans? Well, lol.I have a lot of plans! Money always being the deciding factor. As of right now I just finished up my jig to Cut & Turn then added the option of extending my beams to whatever width. I'm contemplating extending the beams 4" per side. I have a donar se...

Good Morning Guys, Figured its time I come out from the shadows and see what's going on. Went ahead and got myself a nice Christmas gift this past year and it's time to start building the bronco I always wanted. I've always wanted a bronco since I was a kid! Searched for months and finally found a d...