It's been a couple of years since I've done one. I had to shorten the front driveshaft 1.5". I cut 1.5 inches out on the chopsaw, hose clamped the two halves into a piece of angle iron to keep it inline, and welded the halves back together. The driveshaft shop checked the balance and I headed down t...

Thanks, I'll check again when I go home.

If anyone has can post any decent pictures of what I'm missing ie: O2 frame/chassis plugs, wire loom, and location, that would help ...thanks again

1996 Bronco 5.8 OBII. Question: I'm replacing the 2 O2 upstream sensors off the Y-pipe and the 1 downstream. Backstory: I got this bronco as a project from a customer. It was tipped over with a 1996 chassis and a 1994 cab still with the 1996 computer. He did not finish the cab swap. So I got it and ...

Cages are available and pictures are on our website. We have 2 cages left of the first 10. They save a lot of time!!!! Solo's 95 Bronco has the cage and their 96 Bronco has the cage also installed. The cage can be tacked and burned in on a weekend with 2 people. It fits like a puzzle....Call Solo Mo...

FOR SALE: 351W/5.8L Fiveology MASS Air conversion with their labeled wire loom, New/Recalibrated OEM Computer still in the plastic, MASS Air sensor and housing, stock air cleaner box, and factory loom repined or repin your loom. The package came with 8x 24lb injectors also...... I still have instruc...

FOR SALE: 5x NEW 35" Grabbers mounted on newly Powdercoated Black Ford Alcoa 15x7 wheels $275 each...... 1x 35" Grabber mounted on newly Powdercoated Black Ford Alcoa 15x7 wheels $225.............Went to 37s on my 96 Bronco...................CALL or TEXT AFTER 8AM & BEFORE 9:30PM on my cell 626.524....

Ok, I guess I forgot to put the price for the Entry-Level Kit Special...$1499

SOLO MOTORSPORTS INC. BRONCO CUT N' TURNED ENTRY-LEVEL 4" Lift SPECIAL: Cut N' Turned Beam Work, 4" Coils, 1 pr Front Bilstein 5100 Shocks, Drop Pitman Arm, 3-Piece Extended Stainless Brake Line Kit, 1 pr Alignment Cams, 1 pr of 1 1/4" Heimed Extended Radius Arms w/Pivot Brackets..........Everyone h...

Solo Motorsports is looking for a stock 8.8 rear end complete out of Bronco. Call or email info@solomotorsports.com or PLEASE CALL MY SHOP ONLY AND NOT MY CELL for those who have it or email me.........626.966.7656 Thank you, Bobby

We are looking for an engine wiring harness for a 5.8L 1990 or thereabouts Bronco that's complete with no cut anything. Also, looking for an engine wiring harness for a 5.8L and ECU computer for 1996 Bronco only with OBDII with no cut anything. Please call the shop at 626.966.7656 or please email in...

It's now up on our website solomotorsports.com

WIY 1.75" Full Interior Prerunner Cage with 1.75" Roof Webbing, and 1.25" Corner Gussets available in a few weeks. Mock up went to CAD designer Monday, 8.11.14. This is the CAD rendering of the design. Notching the side of the dash along the factory A-pillar is required. Price Point will be $3500 af...

FREE!!! NEED GONE ASAP!!!!!!.... I have a Bronco cab, doors, & shell (Body only and no tailgate or front fenders & hood) this has been gutted. No frame. Bring whatever you have and I can load it with our forklift. 626.966.7656 Thanks

HELP!! I am trying to insure my Bronco for "limit of liability". AAA doesn't do it since it's not a classic. Hagerty's cut off is 1985 -- my Bronco is a 90. Any help on who to call to get this thing insured would be appreciated. Thanks, Paul

Solo Motorsports has almost completed a protype WIY 1 3/4" DOM Bronco interior cage from our donor Bronco. It will be a "prerunner cage" that's prebent and prenotched similar to our WIY Ranger race interior cage. The Bronco cage will feature 1 3/4" DOM, lower pontoons for the cage to sit on instead ...

FAST-AID FUND RAISER BBQ & OFF-ROAD SHOW When: Saturday, September 18th at Solo Motorsports Inc.11am-2pm Where: 639 N. Barranca Ave. Covina, Ca 91723 In response to our sport’s tragedy, Solo Motorsports is hosting a BBQ (hamburgers, hot dogs, chips, and a soda) and off-road race car & prerunner show...

SCORE inspection is open to interpretation. Savage sent a guy to Solo in Covina to tag 2 Class 6 Rangers (Mind you these were both $65k & $90k race trucks each). they had us add -- what I thought was useless -- 3" gusset on C-piller inside cab. Yet he didn't notice that we weren't finished with cage...

What year Ranger 4wd were they off of? Thanks Bobby Solo

Oh, you're that Nick with the F150 shoop hoop that I cursed and swore to make it fit your Bronco. Now I have face to match a truck. And yes, Bobby hates the internet but it is part of our modern world and Solo Motorsports needs to be part it. Talk to you soon. Paul @ Solo Motorsports