Hello I forgot to add this in my last sale add. But I have a pair of used fox 2.5 shocks the caps on the reservoir sucked in and leaked some oil out so they will need to be topped off or rebuilt. I don't know the valving, the shafts, and mono balls are in good shape they have normal wear on bodies a...

Hello I've got a set of used stock width cut and turned beams with bushing type radius arms/brackets. They have shock tabs welded on the fronts, the passenger beam was plated however the driver side still needs to be done and both pivot busing need to be replaced. Radius arms were also plated one is...

Yeah the upper is moved in, not exactly sure how much I'll check it out when I get home.

Got the driver side up and same numbers. This is with a 0 degree cam, no shocks and no vehicle weight on it.

Here's an update with the beams. I got it all torn down yeterday and the passenger side new beam put up with a tire on it. At ride height, and measuring straight down the frame rail to the beam it's at 6.5" with 4 degrees negative camber. If I go to 7.5" frame to beam it's at 0 degrees camber. I hav...

I've been slammed at work and to tires to mess with it. Maybe this weekend I can get in on the bench and assemble aspare set of knuckles I have and see what it looks like. I have some stock width cut and turned beams from camburg so ill try to get a comparison. Either way I'll let you know. I hope t...

So I measured the gap between ball joints and they're the same. The lower has not been cut or moved. The top was moved inward opposite of what a standard cut and turned beam would have done. I talk with the seller and he said thas just how that particular shop sets there beams up. I'm get some hubs ...

I'll have to ask, I was told it was designed for a bronco set up but I guess we can't rule out a dana 50 setup.

Hey everyone have any of you guys seen this before? It's a set of 4.5 beams built by Baja Race Shop, I've only seen where the lower ball joint is moved never the top. Any pros or cons on moving the upper ball joint? http://i1061.photobucket.com/albums/t466/kennyv27/Mobile%20Uploads/20170221_201714.j...

The AR969 is a 15"x8" btw. Ive had them for a month or so now with no issues. Thanks for the advice.

I don't have a close up of the wheels on the Bronco but I did end up with the American Racing Ansen ar969 with 35" projects. So far about the next best thing to the ar23 imo. http://i1061.photobucket.com/albums/t466/kennyv27/Mobile%20Uploads/20170101_161858-1.jpg My AR23S and 35s went to my dads bui...

Oops just saw a similar post down below that didn't pop up in my search. I'll check that out, sorry for the double post.

Hey guys, I'm looking to regear the front of my 93 bronco. A little run down about situation. 3 years ago I swapped to a 9" rear end with 4.11s and factory posi. So I regeared the front to match and installed a Detroit Trutrac it was great setup on road, offroad I wish I had a slightly lower gear. A...

I was running 35 b ko2s on 10" with good success. But like I said I score a set of projects and need wheels for them but there aren't many 15s to choose from. Either way I already ordered the Ansen so we'll see what happens.

Right on I think I'll stick with original decision of the Ansen then. Thank you.

Thanks FUFIMI, that's a little reassuring. 15" wheels are far few now a days. What offset is recommended also?

Need some advice on wheels. I have a set of 35 12.50 r15 projects and need some wheels I'm trying to keep the classic bronco look and not go to flashy. I really like the American Racing ansen wheels but there only 8" wide. Is it a must that I go 10" wide? Any advice and wheel recommendations are gre...

Im a diesel tech at penske truck leasing and we have them laying around everywhere. They come off the freightliner ac condensers. Maybe ask a local shop if they have any laying around. I'd hook you up if I was in az.

Thanks I'll look into that.

I've considered that method but I already had this setup so it's at a minimal cost to swap a muffler rather than buy a new exhaust.