Saginaw Pumps W/ Brackets
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
Bump, 1 460 and 6 5.0/5.8 setups fresh from sandblast this morning.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
-
- Posts: 141
- Joined: Sun Sep 24, 2017 12:07 am
- Bronco Info: 1996 Ford Bronco, trail ready/sand loving.
- Location: San Jose, CA
Re: Saginaw Pumps W/ Brackets
Killer looking pump brackets and lines. Might have to update my pump lines. These are direct fit? No adapters?
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
So, first off you will lose your factory cooler, other than that they’re plug and play for the most part. The hose end on the slip on side I usually have to ream out a little bit to slide it on easier as it’s just a tad smaller, but with AN fittings that’s the only way to make it workStan the Man wrote:Killer looking pump brackets and lines. Might have to update my pump lines. These are direct fit? No adapters?
Sent from my iPhone using Tapatalk
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
bump, currently have
1 460 setup
3 5.0/5.8
1 460 setup
3 5.0/5.8
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- Andy Jones
- Posts: 2209
- Joined: Tue Dec 08, 2009 2:47 pm
- Bronco Info: In the Works!
- Location: Canyon Lake,ca
- Contact:
Re: Saginaw Pumps W/ Brackets
Wanted to show off my setup that Travis just recently built up for me. I’m super pumped on the product and service! Thanks again dude!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
dont PM me.. I don't get them on Taptalk
-
- Posts: 13
- Joined: Wed Aug 24, 2016 11:23 am
- Bronco Info: 89 BrF150 on 33x17's no lift. Stroked and built 302, with Mustang electronics
Re: Saginaw Pumps W/ Brackets
What about filter and cooler? Thermal bypass; it gets cold -where I live?
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
i dont do any of that stuff but you can adapt one inside on the low PSI side with the factory econoline hoses. I'll glad sell you a pump assembly and you can figure out hoses if you want, there just isnt enough demand for what youre asking for it to be worth my time to R&Dfreechrisb@gmail.com wrote: ↑Wed Sep 09, 2020 3:31 pmWhat about filter and cooler? Thermal bypass; it gets cold -where I live?
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
Oh, and if you use my hoses with AN fittings, you lose the oem "cooler" but if you run econoline hoses it retains it, hope this helps.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
-
- Posts: 13
- Joined: Wed Aug 24, 2016 11:23 am
- Bronco Info: 89 BrF150 on 33x17's no lift. Stroked and built 302, with Mustang electronics
Re: Saginaw Pumps W/ Brackets
Yes, thank U for U'r response. I actually have van bracket, new RedHead gearbox, and a new/reman Ford saginaw pump -with a remote reservoir fitting on top of it? Where U'r cap would go? This has me kinda wondering; guess go out and get a sealed canister type - mount it on the firewall or something. Only running 33s and no ram; though just want to do it once and it b right. Magna-Pure filter, thermal by-pass and cooler....seems like alot going on here. Thanks for any and all recommendations and help.
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
i actually just had my first encounter with those weird pumps, you can also just swap it out for one that takes a cap. i think the remote resi ones came off of RVs but havent been able to confirmfreechrisb@gmail.com wrote: ↑Fri Sep 11, 2020 1:56 amYes, thank U for U'r response. I actually have van bracket, new RedHead gearbox, and a new/reman Ford saginaw pump -with a remote reservoir fitting on top of it? Where U'r cap would go? This has me kinda wondering; guess go out and get a sealed canister type - mount it on the firewall or something. Only running 33s and no ram; though just want to do it once and it b right. Magna-Pure filter, thermal by-pass and cooler....seems like alot going on here. Thanks for any and all recommendations and help.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
bump, currently have 5 5.0/5.8 setups ready to go, 2 460 setups
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
bump, two 460 and 4 5.0/5.8 setups
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
bump, just picked up 7 more from sandblast and assembled ready to go
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- THEJESUS
- Posts: 173
- Joined: Wed May 18, 2016 4:30 pm
- Bronco Info: 1992 BRONCO XLT
- Location: Lake Elsinore
Re: Saginaw Pumps W/ Brackets
Sent text
If everything seems under control, you're just not going fast enough!
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
bump, currently have 3 5.0/5.8 setups in stock, anyone who buys before 10 PM PST 1/14/21 ill throw in a free shirt or if you just want to buy a shirt, hit the link in my signature haha
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- Wrightracing.net
- Posts: 2225
- Joined: Thu Oct 28, 2010 9:58 pm
- Bronco Info: 1972 Bronco with an 86 chassis, full cage and Long travel coil-over suspension.
- Location: San Diego
- Contact:
Re: Saginaw Pumps W/ Brackets
Do these pumps work well with a Hydraboost brake setup and a ram assist inline?
David Wright
David Wright
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
Hey Dave,Wrightracing.net wrote: ↑Fri Jan 29, 2021 8:45 amDo these pumps work well with a Hydraboost brake setup and a ram assist inline?
David Wright
guys run them with both, no personal experience with it, im happy to sell you all the components minus the pump, because youll need a different one than i sell (Extra port) thats PN BBB INDUSTRIES 7322151, let me know!
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- Wrightracing.net
- Posts: 2225
- Joined: Thu Oct 28, 2010 9:58 pm
- Bronco Info: 1972 Bronco with an 86 chassis, full cage and Long travel coil-over suspension.
- Location: San Diego
- Contact:
Re: Saginaw Pumps W/ Brackets
Ok, thanksS00TLYFE wrote:Hey Dave,Wrightracing.net wrote: ↑Fri Jan 29, 2021 8:45 amDo these pumps work well with a Hydraboost brake setup and a ram assist inline?
David Wright
guys run them with both, no personal experience with it, im happy to sell you all the components minus the pump, because youll need a different one than i sell (Extra port) thats PN BBB INDUSTRIES 7322151, let me know!
David Wright
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
bump, currently have 3 of these ready to go for 5.0/5.8
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1070
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: Saginaw Pumps W/ Brackets
bump, have 3 setups ready to go, brackets are sandblasted, pulleys are sandblasted and powdercoated, reman pumps installed. $300 plus shipping or picked up in Buena Park or South Bay Los Angeles
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)