Random updates... what are you working on?

User avatar
SteveG
Admin
Posts: 6116
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
Location: Arroyo Grande, CA

Re: Random updates... what are you working on?

Post by SteveG »

Beautiful!

1Hondalover wrote:
1Hondalover wrote:Does work count? I asked some of our guys if they'd rather work August in Santa Clarita or Catalina on the beach. Guess what their answer was?

Sucks they get to live there all week and I only get to visit on Mondays......

We're building new power and lighting for a new pier that was destroyed in the last storm they had. Tomorrow will be the end of the first week. This was the start of the new construction at the end of July.
Almost done.
8-29-15 Whites Landing pier at night snip.jpg
cs_drums
Posts: 2912
Joined: Wed Dec 22, 2010 10:39 am
Bronco Info: 94 5.8 Bronco w/dreams of being finished

Random updates... what are you working on?

Post by cs_drums »

Made a "street legal" headset out of a broken pair I had....ImageImage
User avatar
yikes
Founder
Posts: 4138
Joined: Sun Dec 06, 2009 7:51 am
Bronco Info: 1996 with tires and stuff
Location: Yucaipa, CA

Re: Random updates... what are you working on?

Post by yikes »

Haha! Nice!
User avatar
ESHALLBETTER
Posts: 1588
Joined: Fri Dec 11, 2009 8:49 am
Bronco Info: 85 class 3, 70's somthing trail bronco.
Location: Minneapolis, MN

Random updates... what are you working on?

Post by ESHALLBETTER »

Image

Getting the "new to me" bike dialed in and trying to get a few more rides out of the season.

And building a deck!

Image
User avatar
BDKW1
Posts: 1518
Joined: Mon Jun 14, 2010 1:19 pm
Bronco Info: It's the new and inproved Party Barge!
Location: Not Socal

Re: Random updates... what are you working on?

Post by BDKW1 »

Homeownership still sucking hardcore.

4 rooms completed, new hardwood floors, holes patched/painted, trimmed and all new outlets/switch's. Have also replaced 2 windows. Did some wiring on the shop, just need to dig 100' of ditch and lay the supply cable. Next up, 650SQFT of tile...........
User avatar
ChaseTruck754
Spy/Ninja
Posts: 9194
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks
Location: Huntington Beach, CA

Re: Random updates... what are you working on?

Post by ChaseTruck754 »

Sounds like a few of us are in the same boat... Haven't touched the tuck in what I believe is 5+ months now. Yay....

Been on a huge shed so as to hopefully get the wife's car in the garage, shelving & general organizational stuff for the house, redoing home office, etc. I think I can see a faint dot that is the light at the end of the tunnel though, so maybe I can sneak a night or 2 in soon. Doubt it, but we'll see.
User avatar
1Hondalover
Posts: 819
Joined: Mon May 14, 2012 2:30 pm
Bronco Info: Having so much fun with friends in Baja, we're not sure if we want to race NORRA.....
Location: Santa Clarita

Re: Random updates... what are you working on?

Post by 1Hondalover »

Cheer up guys. maybe the hobby is on hold but.....
ChaseTruck754 wrote:Sounds like a few of us are in the same boat... Haven't touched the tuck in what I believe is 5+ months now. Yay....

Been on a huge shed so as to hopefully get the wife's car in the garage, shelving & general organizational stuff for the house, redoing home office, etc. I think I can see a faint dot that is the light at the end of the tunnel though, so maybe I can sneak a night or 2 in soon. Doubt it, but we'll see.
BDKW1 wrote:Homeownership still sucking hardcore.

4 rooms completed, new hardwood floors, holes patched/painted, trimmed and all new outlets/switch's. Have also replaced 2 windows. Did some wiring on the shop, just need to dig 100' of ditch and lay the supply cable. Next up, 650SQFT of tile...........
.....I know many people that can only wish they had a shed, a home office, some hardwood floor, tile or a shop. I see each of you as pretty damn fortunate.

And you have a Bronco or off road toy too?
User avatar
Nick
Founder
Posts: 3969
Joined: Sat Dec 05, 2009 12:36 pm
Bronco Info: 1995 bird poop target
Location: La Habra Ca.

Re: Random updates... what are you working on?

Post by Nick »

1Hondalover wrote:
.....I know many people that can only wish they had a shed, a home office, some hardwood floor, tile or a shop. I see each of you as pretty damn fortunate.

And you have a Bronco or off road toy too?
Amen!
User avatar
ChaseTruck754
Spy/Ninja
Posts: 9194
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks
Location: Huntington Beach, CA

Re: Random updates... what are you working on?

Post by ChaseTruck754 »

Don't get me wrong - life is good for sure. I actually like doing construction type stuff almost as much as I like fab work, so it's not all bad. I just am jonesin for some REAL shop time, or rather to break out the port-a-band, bender and belt grinder vs. a miter and/or jig saw. I see others making progress on their toys, or better yet, actually using them & it makes me want it all!
User avatar
BDKW1
Posts: 1518
Joined: Mon Jun 14, 2010 1:19 pm
Bronco Info: It's the new and inproved Party Barge!
Location: Not Socal

Re: Random updates... what are you working on?

Post by BDKW1 »

1Hondalover wrote:And you have a Bronco or off road toy too?
I sold all My off road stuff for the move. I haven't been on a motorcycle for over a year. The longest I was ever off a bike before was about 6 months when I screwed up My neck. Sad times......

All the Broncos out here are rusty piles of shit also.........
User avatar
96UAV
Posts: 192
Joined: Sat Jun 23, 2012 10:55 am
Bronco Info: 96 XLT --Under Construction--
Location: Phoenix, AZ

Re: Random updates... what are you working on?

Post by 96UAV »

ESHALLBETTER wrote:Image

Getting the "new to me" bike dialed in and trying to get a few more rides out of the season.

And building a deck!

Image
Nice!! Santa Cruz is top notch. I just recently purchased a Yeti SB5c. It's an amazing machine. Luckily my riding season is just beginning.
User avatar
SteveG
Admin
Posts: 6116
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
Location: Arroyo Grande, CA

Re: Random updates... what are you working on?

Post by SteveG »

Working on my Tony Stark costume for the annual Halloween party... electrical components mostly done.
image.jpeg
image.jpeg (238.34 KiB) Viewed 1332 times
User avatar
tcm glx
Peanut Butter
Posts: 7308
Joined: Tue Dec 08, 2009 11:19 am
Bronco Info: 93 Ford Bronco 5.8
Location: Riverside Ca
Contact:

Re: Random updates... what are you working on?

Post by tcm glx »

Are those KC cyclones Steve??
User avatar
SteveG
Admin
Posts: 6116
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
Location: Arroyo Grande, CA

Re: Random updates... what are you working on?

Post by SteveG »

No. One is is an arc reactor for power. The other is a repulsor I'll wear on he palm of my hand.
User avatar
Wrightracing.net
Posts: 2225
Joined: Thu Oct 28, 2010 9:58 pm
Bronco Info: 1972 Bronco with an 86 chassis, full cage and Long travel coil-over suspension.
Location: San Diego
Contact:

Random updates... what are you working on?

Post by Wrightracing.net »

Well, getting ready for the Baja 1000.

I just did some intercom modification to a couple Kenwood 110 watt race radio's for Brenthel's race team.

Image

I am working on a pit box radio setup, I just ordered the flight case for.

Image

About a month away until the 1000. I like the loop race's better than the paninsula runs.

Image
User avatar
Tchajagos
Posts: 2124
Joined: Sat Dec 17, 2011 11:07 am
Bronco Info: 1993 xlt stock on 33' BFGs
Location: Murrieta

Random updates... what are you working on?

Post by Tchajagos »

Image
Doing a little install.
User avatar
ChaseTruck754
Spy/Ninja
Posts: 9194
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks
Location: Huntington Beach, CA

Re: Random updates... what are you working on?

Post by ChaseTruck754 »

Install on one of your trucks Travis, or for a customer?

If yours - which truck???
User avatar
Tchajagos
Posts: 2124
Joined: Sat Dec 17, 2011 11:07 am
Bronco Info: 1993 xlt stock on 33' BFGs
Location: Murrieta

Random updates... what are you working on?

Post by Tchajagos »

For a customer. I wish I could afford this stuff haha.
User avatar
AussieRod
Posts: 2805
Joined: Sun Sep 05, 2010 1:43 am
Bronco Info: 81 Bronco XLT, 250 alloy head crossflow 6, NP435/NP208, 4:10 gears, 31-10.5R15 M/Ts.
Location: Downunder

Re: Random updates... what are you working on?

Post by AussieRod »

What am I working on? Every spare hour goes into this:
P1010336.JPG
P1010336.JPG (73.13 KiB) Viewed 1107 times
Justfinished putting half the roof sheets on. Trying to get the other side done after work when I have time (working 2 jobs):
P1010337.JPG
P1010337.JPG (74.67 KiB) Viewed 1107 times
P1010338.JPG
P1010338.JPG (74.09 KiB) Viewed 1107 times
When it's done, it will shelter this baby:
P1010335.JPG
P1010335.JPG (74.08 KiB) Viewed 1107 times
All independant suspension, electronic sway control, fully self contained (gas hot water, 3 way fridge, solar panels on roof, 160L water capacity., all good for those long getaways.
Rmc
El Jefe
Posts: 6026
Joined: Tue Oct 09, 2012 10:22 pm
Bronco Info: 94 bronco xlt prerunner
Location: IE SoCal
Contact:

Re: Random updates... what are you working on?

Post by Rmc »

Nice!! I'm jelly
Post Reply