WANTED: 95 - 95 SN95 front spindles

[AussieRod]

After a PAIR of SN95 front spindles. MUST be 94 or 95 ONLY. 96 - 04 spindles are different and won't work (too much bumpsteer). Spindles with decent hubs, twin piston calipers (prefered) if possible. A Cobra 13" set-up would be even better, but not essential. Rotors I can buy here, so I don't need them. If you find a set, let me know and we can work on it.
Cheers.

Spindle ID:

94-95vs96-98spindle.jpg

[AussieRod]

Bump.

[S00TLYFE]

Hey rod, I don’t see a ton of these in the junkyards, but I’ll keep my eyes peeled. Only thing I don’t know how to do is ship to you in Oz. Any idea how to make that happen if I do find some?


Sent from my iPhone using Tapatalk

[toddz69]

Rats - I saw what was either a '94 or a '95 in the yard on Sat. Unfortunately it's 100 miles away so I won't be able to go grab them for ya.

Todd Z.

[AussieRod]

Hey rod, I don’t see a ton of these in the junkyards, but I’ll keep my eyes peeled. Only thing I don’t know how to do is ship to you in Oz. Any idea how to make that happen if I do find some?
Sent from my iPhone using Tapatalk

Hey Todd,
Don't go out of your way too far. If you happened to stumble across a pair in a local yard, even if they are just bare stubs is fine, by all means see what they are worth and we can take it from there. Shipping will KILL me, but a 20lb box is about US$120 to downunder. V6 or V8 stubs are the same, but have to be from a '94 or '95. Happy to contibute to youe time and fuel to help out.
Cheers.

[AussieRod]

Sorry, getting the names mixed up here. D'oh!

[toddz69]

What is a fair price for you for the pair outside of the shipping costs?

Todd Z.

[AussieRod]

What is a fair price for you for the pair outside of the shipping costs?

Todd Z.

Can't say, although I've seen them on some salvage websites stateside for as little as $25 ea. I'm guessing I'd pay $50 - $75 ea for the correct ones.

[S00TLYFE]

Rod, if you have whatsapp DM me your number, I may have a solution


Sent from my iPhone using Tapatalk

[ChaseTruck754]

Hey rod, I don’t see a ton of these in the junkyards, but I’ll keep my eyes peeled. Only thing I don’t know how to do is ship to you in Oz. Any idea how to make that happen if I do find some?

I've shipped to him a few times, and gathered parts here for him to compile enough to make it worth shipping. It's not bad and I can do so again if needed.

[AussieRod]

Hey rod, I don’t see a ton of these in the junkyards, but I’ll keep my eyes peeled. Only thing I don’t know how to do is ship to you in Oz. Any idea how to make that happen if I do find some?

I've shipped to him a few times, and gathered parts here for him to compile enough to make it worth shipping. It's not bad and I can do so again if needed.

You da man, Steve!